Forgot password
Order status
Free delivery from 150 euro
Motorcycle engine - parts
Triumph Trophy 1200 2002
Manufacturer
Price
Sort
€19.36
JMT Kawasaki clutch sensor
€111.61
Lowest price from 30 days before discount: €117.49
Clutch friction plate kit TRW Lucas MCC 140-9 - MCC140-9
![Valve plate 25 [2,250mm] OEM product](https://img.gmoto.pl/641278/plytka-zaworowa-25-2250mm-produkt-oem_1_m2.webp)
![JMP 25 valve plate [2.70 mm].](https://img.gmoto.pl/175948/plytka-zaworowa-jmp-25-270-mm_1_m2.webp)
Options +2 €91.21
Lowest price from 30 days before discount: €101.34
DID timing chain SCA0412ASV-146 open timing chain with lugs
(6) 
Browse by manufacturer
Products reviews
The screw is made with precision. I just pay attention to the assembly! The original screw is at least twice as long. The torque recommended in the service book (43Nm) is far too much for a Yamaha Thundercat, fekt is a broken thread.
Review translated automatically
Reliable opinion
The chain fits BMW f800gs. The plus point over the original chain is that it is not factory shackled which makes installation easier.
Review translated automatically
Reliable opinion
![Rogério - JMP 25 valve plate [2.70 mm].](https://gmoto.pl/var/opinion_images/gmoto/i-got-an-yamaha-xt350-of-1991-573051.webp)
I got an yamaha xt350 of 1991. I am very glad with this item. Very good quality / price. Recomend it.
Review translated automatically
Reliable opinion
![Mateusz - JMP 25 valve plate [2.70 mm].](https://gmoto.ie/assets/images/no-photo.png)
Replacement with JMP plates helped, I used them in the Triumph Rocket III as to the quality I can only say after a longer use so far everything is ok and from the appearance and external treatment looks good probably I would know more if I measured it with a micrometer screw and for example hardness but I did not do this only after putting it on I measured the valve clearances again and checked that they met my initial assumptions . After replacement the motorcycle again runs quietly and ignites without any problem on the shot greetings
Review translated automatically
Reliable opinion
Hello, I recently purchased some bearings shown in the ad. They were mounted to the scythe in the mtd tractor. SKF bearings have good strength and fit perfectly in the places for them. The advantage of the product is all kinds of uses, they perform well in any equipment. I recommend to purchase this product. Greetings
Review translated automatically
Reliable opinion
The product is very similar to the original. The only fault is that the threaded end is too short compared to the original. It's missing about 5 to 8 mm. This damaged the threads on my housing. I had to dismantle everything and redo the threading with ilsert.
Review translated automatically
Reliable opinion
When purchased, the bearing had no play, as befits a new bearing. The bearing has many uses. They can be mounted to wheels that are equipped with a drive on which a very high force acts. This bearing will 100% last more than a typical Chinese bearing.
Review translated automatically
Reliable opinion
Yamaha XVS 1300 CU year 2014 The bolt is shorter than the original and does not hold the size of the original bolt. It should not be indicated to fit this model. The only use for it is a copper gasket.
Review translated automatically
Reliable opinion