Forgot password
Order status
Free delivery from 150 euro
Motorcycle exhaust system - Page 9
Manufacturer
Price
Sort
from 110
Browse Motorcycle exhaust system - Page 9 by manufacturer
Products reviews
Hello, the motorcycle is a Yamaha Drag Star 2008r 1100 Silverado The mufflers themselves are super made, inside some light damping, they are very loud. So far I have ridden them about 400km in two days, you need to learn how to ride in built-up areas,or past the police. I ride with stopwatches, it can be tolerated, no problem. My cousin wanted to follow me, because he said it was music to his ears, indeed, you may like it, especially when I brake with the engine ;) , people do not turn so , I guess it is not so loud, which makes me happy.I am oversensitive on this point. the other cousin laughed that he would trade for Remus ;) WHAT about the mounting in my motorcycle, it could have been better. Unfortunately, the manifold pipe is covered by a decorative sheet metal, which is longer than the pipe itself. The outside diameter of the pipe on the drag is 35mm. And the muffler flange itself is wide and short, which is why it was not possible to use the attached clamps, which are nicely chromed, but also useless in my case, because u so they would be shielded. The collar is so wide that the attached clamp will not fit, I used others. The flange itself could be longer, in the attached photo marked the beginning of the manifold pipe. I also did not use the attached brackets, I bought a flat iron in castorama for 9pln, cut to length, drilled holes, painted black and you can not see them, chrome, in my case they would be visible and disfigure the view, and so black do not know, they blend with the frame. For installation I used only two reductions, plus the original reduction from Yamaha mufflers ( copper), fits perfectly. In the photos in blue marked handles.
Review translated automatically
Reliable opinion
Honda Shadow VT 125 year 2000 The muffler looks brilliant admittedly it is quite loud, but it gives the motorcycle the character of a large engine capacity. As for attaching the mufflers to the frame, they do not cause any problem, the mounts are very universal. When it comes to installing the exhausts themselves, here I suggest you go to a mechanic, because while with the thicker lower manifold there is no problem with installation and fitting (the included reduction rings fit), with the second shorter upper manifold (looking from the side of the motorcycle from the exhaust side) there are big problems because the included reductions do not fit and you need to weld a thicker pipe to fit the muffler to the pipe. In my case it worked out great but required a lot of work and fitting. In my opinion, without a welder and good thinking you can't do without. I with my mechanic friend did it about 4 hours of normal work without breaks. The result is great because we even managed to use the original burn shields after minor modifications. The muffler sounds great and looks great, but it's really loud for example up to the 1200cc engine at idle you can hardly hear any difference. Later it gets a little farting but it's still a much better sound than drilling the exhaust as some colleagues advise. In my opinion, it is better to invest in this product, but in longer routes it can be tiring due to the noise.
Review translated automatically
Reliable opinion
Suzuki intruder 700 (88') - mufflers very well made, beautiful chrome plating, I used 3 reduction rings and it fit perfectly. In the intruder, the only problem was the mount - the screw from the adjustable mount protruded too much and got in the way of the battery cover. Instead of the included mount I used a steel plate and everything fit and held nicely. As for the sound - racy, bass and at high revs "ragged sheetmetal", music to the ears, loud, but not too loud as a completely empty exhaust. I recommend to anyone who is bored with stock exhausts and wants to give the machine a new life.
Review translated automatically
Reliable opinion
The elbow very aesthetically made, the shape is not identical to the original, but it fits well and I was able to successfully install it in the simson without any obstacles. You can gently shorten the tip depending on the muffler you have. After tightening it nicely holds the pressure the engine runs quietly. The elbow fully met my expectations I have no reservations about my next purchase. With a competitively low price, I can only recommend the item to other buyers. From experience, I will also point out that the elbow is not from the production of the 1980s, so the strength of the chrome coating will certainly not be comparable.
Review translated automatically
Reliable opinion
I installed the mufflers after a small adjustment of the tube diameter to the Aquila GV125. From the small engine sounded a real monster. A very deep sound. The banana, however, quickly disappeared after going out of town. They are very loud and in a small engine that runs most of the time at high revs on the road, the noise is unbearable. Unfortunately, I drive mostly outside the city. With the help came dbkilers from the old mufflers, I removed them and matched them to the new exhaust and it's guitar:). Very well made and lighter than the originals. I recommend, but for larger engine capacities!
Review translated automatically
Reliable opinion
I don't know why they don't install just such mufflers from the factory. I installed it on a Zipp VZ-1 125 (Romet Soft Chopper) without any problems. The included reduction bushings were not needed. It took more time to unscrew the old one. It is not quite a pass-through muffler - it has two pockets directing some of the exhaust to the outer feces. Despite this, it is quite loud. Although at slow speeds the 125tka rumbles with such bass as a liter chopper :) Ultimately, it is worth thinking about an additional db killer - it is being made. Material and workmanship of the muffler sensational!
Review translated automatically
Reliable opinion
I have a Yamaha DragStar 1100, and I was looking for nice mufflers for it, and at Gmoto I found one. They have a nice, loud sound like the thud of horses on the prairie. It is known that when something is universal, you should expect small problems. Reductions for mounting the muffler come in three sizes, the smallest has an inside diameter of fi37 and my pipe is fi35, and that's the whole problem. Now my friend sings beautifully.
Review translated automatically
Reliable opinion
Exhaust elbow perfectly suits Romet mopeds with a 2-speed engine, the so-called kanciak. The workmanship of the elbow is masterful, the chrome shines very nicely and is resistant to scratches, which adds a lot of charm to our moped. The elbow is also very well protected by bubble wrap for transport. Installation of such a refined product is a pleasure.
Review translated automatically
Reliable opinion
Muffler purchased for Suzuki Marauder 125. Unfortunately, the diameter of the original pipe turned out to be too small for the bushings included in the kit, but a person who likes to tinker should easily manage it. The product with very well made, and after installation you get a really great visual and sound effect. Recommended.
Review translated automatically
Reliable opinion
Muffler bought for my dad for Kymco Zing 125 (97). It is universal, so it was no problem to fit and put on at home. It looks very nice and importantly cool, it goes quite loudly which gave the character of the 125. I recommend, great quality for the price, looks more decent than in the photo from the ad.
Review translated automatically
Reliable opinion
Chopper Kinroad poj.72 sounds beautiful on this muffler I recommend to anyone for motorcycles if you want to achieve a beautiful motorcycle voice and at the same time a beautiful chrome exhaust that will look beautiful with any chopper model, cruiser and also in other motorcycles
Review translated automatically
Reliable opinion
Jawa 50 vintage 1979 in the process of restoration. I recommend the product met my requirements. I think I will be satisfied with it. There were no problems with the assembly, it looks like everything will be ok after screwing the whole thing together.
Review translated automatically
Reliable opinion
Junak M16 125cc 2019 Exhausts super made. installation 15 min of work with the use of mounting pipes. Sound mega bass and loud. For such money I recommend to everyone. They present themselves very cool.
Review translated automatically
Reliable opinion
The muffler has a slightly thicker diameter than the original. It is worth buying it with a clamp because the original one will not fit. The paint is prone to scratches. By the way, it's ok, Wsk runs nice on it
Review translated automatically
Reliable opinion
Suzuki intruder VS800 from 1993.Installation much easier than removing the original dampers,but the sound and look of the motorcycle now without comparison better.I recommend.
Review translated automatically
Reliable opinion
A muffler as it looks is what it sounds like. Super sound and loud. I did not expect such a huge effect and sound. I heartily recommend.
Review translated automatically
Reliable opinion
Junak M11 125cc.2015. Exhausts very nice, work beautifully,installation without any major problems. Product as described by gmoto.Thank you
Review translated automatically
Reliable opinion
Romet Komar 2350 fits perfectly, good material, carefully made, I am very satisfied, looks beautiful, recommend !
Review translated automatically
Reliable opinion
Pins a little too long - romet ogar 205 - required trimming, otherwise they enter perfectly, firmly hold the carburetor, I recommend
Review translated automatically
Reliable opinion
Mosquito 2350 , very good quality, nice chrome, looks nice, fits perfectly with chrome muffler
Review translated automatically
Reliable opinion
COLANGE fit well,nice chrome,after heating it does not change color,looks nice,there was no problem with installation.
Review translated automatically
Reliable opinion
I bought parts for the attached WSK, everything fits, I am mega satisfied with the professional service of the store.
Review translated automatically
Reliable opinion
The elbow was aesthetically done there are no scratches the product as described I like it
Review translated automatically
Reliable opinion
Conforms to the description I recommend to all buyers, fits like a glove and looks great with my Toros.
Review translated automatically
Reliable opinion
Romet komar engine 023 elbow is very well made fits like a glove very nicely made :))))
Review translated automatically
Reliable opinion
I mounted the muffler to a 97 Suzuki GN 125. The installation itself without too many problems, however, I will have to somehow seal the muffler at the connection point because 2 elbows from the kit are not enough and with the third again too much. Muffler of great quality. Beautiful chrome. It gives a beautiful bass sound even on a motorcycle of such a small capacity as a 125. Driving through the city, a lot of people look at who is driving when they hear me, which of course is nice. In addition, cars hear me which translates into my safety. The motorcycle picks up better with this muffler. All in all, a great muffler for cool money. I recommend to all who are wondering. The stock muffler sounds comical with it. Several people thought it was a much higher capacity hearing it go. I highly recommend it, especially to those who ride smaller capacities and want to have a substitute for a large machine.
Review translated automatically
Reliable opinion
Revelation. Best shopping for a moped I have ever done!!! It's a pity that there are only 5 degrees of product rating I wanted to give a 10 for a souvenir. I will definitely look here more than once not twice because only this store has the best parts. The original muffler for the mini-chopper does not bother him now rust. It shines and shines like a phoenix rising from the ruins. I bought a lot of other parts and my machine no longer crunches anything. Although it's Chinese is a furore but from this store it only shines the exhaust pipe. Thank you for the super professional service, yes commenting because they have the credit.
Review translated automatically
Reliable opinion
Muffler and elbow purchased all together with the clamp but unfortunately the clamp does not fit after squeezing it even with your fingers there is still a gap between the clamp and the muffler even with the muffler gasket. Workmanship and aesthetics on 5 but the fit on 1. The seller could add to such goods as clamps immediately in a set of bolts and nuts because as a buyer I prefer to pay extra 2zł. than to go specially to the store. WSK 125 GIL, M06B3, engine S01-Z3A. In conclusion, fortunately, there is no problem in Gmoto with the return of goods.
Review translated automatically
Reliable opinion
Romet Pony 50 1989 (Motorynka)- the elbow arrived in very good condition, does not differ from the one from the prl era, it is identical, the product made accurately and aesthetically. Installation was quick and trouble-free, everything mates with each other. I ordered some parts here and will definitely order more. If someone also like me is restoring his motorcycle, I recommend this product with a clear conscience!
Review translated automatically
Reliable opinion
Motorcycle WSK 125, the muffler is a little thicker than the original, on the surface of the muffler are numerous small lumps of production, and all this is covered with stove paint which scratches when lightly scratched, generally a product of good quality well and has become more expensive since my last purchase of the same muffler, once 119zl with clamps and elbow, and today 155zl naked. Best regards to the entire Gmoto team
Review translated automatically
Reliable opinion
Muffler fitted to Romet Soft Chopper 125 cm3. Fits perfectly, there is no need for the included reduction bushings. Removal of the factory and installation of the new muffler takes 15 minutes. Everything fits, no modifications are needed. The muffler itself of very good quality, it gives the bass sound and character of this engine capacity.
Review translated automatically
Reliable opinion
A product for little money, before buying I had concerns about the quality of workmanship. I wanted to remanufacture the old mufflers but the price of this remanufacturing was to be 800 PLN for 2 pieces. It turned out that the quality of the new ones is really good, how with durability it will turn out after a year or two. For this price you can buy new ones every 2 years ;)
Review translated automatically
Reliable opinion
Romet 125 chopper year. 2015 Muffler from Gmoto revelation gives a clean bass sound like a real chopper. Also brings a lot to improve the appearance of the whole machine. Store also rated very positively, delivery fast, hassle-free. Quality of materials: fit: aesthetics: reliable opinion. greetings Luke.
Review translated automatically
Reliable opinion
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
Reliable opinion
I own a 2008 Romet R250 motorcycle.Mounting the mufflers did not cause me any problems,the quality of them is as described only the screws on the clamp could be of better quality other than that everything is fine. And the final effect after installation is impressive, visually super and this sound extra I recommend.
Review translated automatically
Reliable opinion
The elbow came to me in a very average condition. The "chrome" itself has become all over some kind of dotted and as if there was some kind of deposit on it. I think it is from the time the elbow has been lying in storage that it has become so. In any case, to make it look somehow you need to use polishing paste and play around a bit.
Review translated automatically
Reliable opinion
I own a 1969 SHL M17 GAZELA, the machine is 100% original, in working order, and not repaired. The tubes bought at Gmoto.pl are perfect, and the speed of delivery and packaging are top notch. I was surprised how I received the package. Info on e-mail allowed to control the delivery.
Review translated automatically
Reliable opinion
For my 2003 Intruder 125 they fit on average. One bushing is not enough A 2 is too much so I will still have to change it. They look nice on the motorcycle but I think they are much too loud. There will definitely be a visit to SKP for db measurement and possible damping with steel wool.
Review translated automatically
Reliable opinion
I have a moped brand Romet Ogar 205 year of production 1987 I purchased an exhaust elbow before installation I was afraid if it would fit my rome. Installation was child's play and pleasant bending appropriate very nice looks fit super. Regards Jacek
Review translated automatically
Reliable opinion
for the price the muffler very good quality, all nicely chrome plated, the welds could have been sanded a little better, the set included both clamps also nicely chromed, which is a plus Fits on the elbow to the ogar 200, a good muffler for a replacement of the original for nearly 600 zł
Review translated automatically
Reliable opinion