Forgot password
Order status
Free delivery from 150 euro
Motorcycle fuel system - parts
WSK 175
Browse by manufacturer
Products reviews
I own an '84 wsk 175 kobuz . i have owned it for a year . it has undergone a so called small overhaul(electrical ignition ) you can say polishing. However, it had a problem with firing up and getting into high revs. Now the motorcycle starts from the first one, no matter if it has been standing for a week or is warm, it works in the full speed range. You can safely say that it runs out from under the butt. However, the gasser had one defect, namely the valve closing the fuel supply after pressing the lever flooding the float chamber hung up and pissed fuel through the hole at the top of the chamber. Replacement of the valve for the original Pegasus from the era helped.Otherwise, the product is worth recommending. It helped to save the good name of Swidnica vehicles.
Review translated automatically
Reliable opinion
Greetings. Preparing my motorcycles for warmer days, I was forced to replace the float in the carburetor type PEGAZ. Replaced by me recently is in a motorcycle SHL 175 vintage 1966 :) I have already replaced the same product before in a 1967 SHL Wiatr and in a 1963 Junak M10, so the product prze zenie is already proven many times. First of all, what is important for me is solidity and durability. Robustness, so that when massaging it does not cause problems, and durability, so that we do not return to the subject of replacement too soon. In both cases the product works well. I recommend it, with me in each of the cases mentioned it works flawlessly.
Review translated automatically
Reliable opinion
Greetings. Junak m10 from 1963 I replaced the float because the old one, which had been installed for years in the place of the pusher deformed. The float made well of good material, tight, with good parameters and works well, fulfills its purpose 100%. This is the second such product purchased. I installed the first one about a year and a half ago in a 1966 SHL M11 and it runs correctly to this day so I recommend and greet you.
Review translated automatically
Reliable opinion
WSK from 1969, the so-called two-frame. All in all, I was looking for another faucet but several products were temporarily unavailable so I chose this one supposedly for WSK 175 but it turned out to be a hit fit is solid, doesn't leak and in this model looks cool all the more pleasing. recommend.
Review translated automatically
Reliable opinion
WSK 125 Hunchback. Unfortunately I was not able to save the original (broken inside), so I bought a new one. It differs minimally from the original, but if someone cares to spruce up their Wieska, I definitely recommend it :)
Review translated automatically
Reliable opinion
To get it to go on the faucet well you need to heat as it is any fuel line, it fits as it has. Photo of my Romet Ogar 200 under restoration assembled on parts from Gmoto.pl :)
Review translated automatically
Reliable opinion
WSK 125 M06 B3, 1984. It looks nice, there is a gasket, the lock fits - what more do you want! Adds to the charm of the tank.
Review translated automatically
Reliable opinion
Tank cap for WSK, fits without any modifications, made aesthetically, like the original, I can honestly recommend.
Review translated automatically
Reliable opinion
Mz etz 250 material good and workmanship Great nice appearance, workmanship aesthetic. I recommend!!!
Review translated automatically
Reliable opinion
I own a Junak M10. I decided to buy a new PEGAZ carburetor, because the old carburetors are hard to adjust due to their age. The description includes the information , "fits JUNAKA ". The price is affordable, visually nothing to complain about, spacing and fit good. Unfortunately, the carburetor does not respond to slow speed adjustment, adjusting the throttle or needle does not change much. The carburetor funnels fuel into the cylinder in excessive amounts, black smoke from the exhaust pipe and the smell of fuel, response to the gas is uneven The carburetor is not recommended. The plug, filter from the kit are OK.
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
Motorcycle Wsk 175 , Round tank. Not a Hunchback. Well, the faucet made Very nice and solid . Except that it does not fit in any way to my Tank. The threads were made incorrectly. That is, from Left to Right. It is impossible to mount it in any way. If you turn the mounting plate the other way around it doesn't help because then you can't screw the faucet in. I want to return the money because Krnik cost almost 40 zloty.Greetings
Review translated automatically
Reliable opinion
With a diameter of 6 mm and a length of 50 cm, the fuel line is a solidly manufactured component that ensures reliable fuel flow. Its flexibility makes it easy to install, and its fit with standard dimensions makes it a practical and universal solution. Thanks to it, you can be sure of the smooth operation of the fuel system, which positively affects the performance of the vehicle.
Review translated automatically
Reliable opinion
There was a moment that I was lost as to what length the firing pin is for the Pegasus 24,because I had some shorter one,and now be sure what the height of the clasp is really supposed to be correct.However,history has come full circle and they are producing parts from fifty years ago based on those of that time.I don't think I would have come up with that it should be brass,but I admire.
Review translated automatically
Reliable opinion
SHL 175 M11 1967. The price for the carburetor is very affordable. And what is better, the motorcycle works on this replacement really sensational and did not require major adjustments. Made very nicely. Like the original. And for the money. Honestly exceeded my expectations. Installation without any problems. Nothing to complain about. I recommend.
Review translated automatically
Reliable opinion
I own several motorcycles to which this carburetor fits mn shl 175W, the carburetor does not work in any motorcycle is badly fitted inside. The insert of the carburetor, the one where the slow speed nozzle is, should be tight in the body of the carburetor, and there is a play of about 1 mm, the carburetor has no right to work.
Review translated automatically
Reliable opinion
PEOPLE THERE IS NOTHING TO WAIT FOR WHEN IT LEAKS YOU HAVE TO REPLACE THE SET OF GASKETS IT'S EASY 15 MINUTES AND YOU'RE DONE, THE COST IS SMALL BUT THE QUALITY IS MEGA PERFORMANCE CHEAP, EASY FAST AND AESTHETICALLY PLEASING ON THE GASSER AND NOT ALWAYS BEEHIVE E TAM . NOW I WILL ALWAYS BUY SUCH A SET OF GASKETS DURING THE NEXT OVERHAUL I HEARTILY RECOMMEND IT
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
Motorcycle: WSK 175, Year of production: 1974, Capacity: 175 Probably for many my opinion will be shocking, but I have to write it: The carburetor rubber is black and flexible :) And seriously it is a good quality product, tightly fitted which is a plus. I recommend
Review translated automatically
Reliable opinion
WELL, WHEN I WAS STICKING TO THE OLD IT WAS ALWAYS POURING GASOLINE AND NOW I BOUGHT THIS KIT IN AND WHAT IS DRY AS IN THE DESERT IT'S A SHAME THAT I LOST SO MUCH GASOLINE WHEN I DID NOT REPAIR THE FAUCET AND NOW IT IS MORE ECONOMICAL FOR YOUR WALLET AND CLEANER ON THE ENGINE AND THE FLOOR I RECOMMEND!
Review translated automatically
Reliable opinion
The supplier showed professionalism in the preparation and delivery of the shipment. The electronic notification system of the status of the order until delivery to the addressee made a very good impression. very fast delivery And that without a courier.
Review translated automatically
Reliable opinion
WSK 125, vintage 1982.The plug fits better than the one I had before - the mounting plates on the underside go into the opening of the tank without any problem, it turns slightly, but holds firmly. At the same time it does not lock and slightly unscrews. I really recommend it!
Review translated automatically
Reliable opinion
The gasket for the float chamber quality is good and has the original dimensions. Unfortunately, the 3 fiber gaskets (red) do not seal well, they are too thin and let the fuel through. The gasket for the float chamber cap is too large.
Review translated automatically
Reliable opinion
The filter has a very cool reusable solution. It can be taken apart and blown out, which is a big plus. After several such treatments, the filter continues to be tight, no fuel leaks from it. I highly recommend
Review translated automatically
Reliable opinion
A good, solid guide ;)
Review translated automatically
Reliable opinion
Copper washer, round. Such as I dreamed of ;) Although when I wanted to mount it, it turned out that it is not required. I'll leave it for myself as a souvenir and return to the store as I do every time. Full professional
Review translated automatically
Reliable opinion
Gasket after installation ok, but after contact with gasoline increased its size. I needed to leave quickly and trimmed on the outside. It did not do much, had to be sent back for complaint. My fault.
Review translated automatically
Reliable opinion
The faucet was not for the model I specified , the thread did not fit because it was right on the tank and the original is left . I ordered a second one and it came OK . At the moment I am waiting for a refund . greetings
Review translated automatically
Reliable opinion
I put it on my SHL M11. The build quality is very good. After assembling the carburetor and driving a dozen kilometers, I only tightened the float chamber a little because there was some fuel soggy around the chamber.
Review translated automatically
Reliable opinion
Very flexible, perfectly fits the Mosquito, allows you to replace old hoses that have already lost their flexibility. Easily cut to the desired size for a perfect fit.
Review translated automatically
Reliable opinion
The filter fits the Jawa Mustang very nicely. Small, not chewing si3 in the eyes like the paper ones. I think it's worth paying the extra 3-4zl. Nothing si3 is airing up. I recommend
Review translated automatically
Reliable opinion
Filter prima sort. Elegant looking . Fulfills its function I recommend to all who own old mopeds or even lawnmowers.
Review translated automatically
Reliable opinion
My opinion is one and the same. "If everything is at the highest level then there is nothing to write about". Greetings to all WSK owners
Review translated automatically
Reliable opinion
Works great in stopping dirt from entering the carburetor Looks good and fits well Transparent so you know when its time for change
Review translated automatically
Reliable opinion
Very good quality materials,aesthetically made, everything fits well, easy installation and affordable price. I recommend
Review translated automatically
Reliable opinion
The product meets my expectations . Workmanship and quality super. I recommend the product really great. Greetings
Review translated automatically
Reliable opinion
The kit has all the necessary components to repair the carburetor, The carburetor works like new.
Review translated automatically
Reliable opinion
Fulfills its function as it should , it is good to fit it for example to WSK
Review translated automatically
Reliable opinion