Forgot password
Order status
Free delivery from 150 euro
Motorcycle grips - Page 6
Most popular manufacturers
Manufacturer
Price
Sort
from 29
Browse Motorcycle grips - Page 6 by manufacturer
Products reviews
I own a 1988 Simson SR50. My Simson this year celebrates its 30th birthday so I made it a general overhaul of the engine, of course I ordered everything from Gmoto store. Parts that I ordered for simson in Gmoto always fit and also this maneuver perfectly matched, and prices not exorbitant compared to other stores. Contact with the staff fast and pleasant and fast delivery. Gmoto store as much as possible PLUS I recommend to everyone who owns older as well as newer scooters or motorcycles. Gmoto has it all!!!
Review translated automatically
Reliable opinion
Romet Ogar 200 1988. The handle is very solidly made of really good quality material, but it could have been fitted better with the handle and the plate (stop). Since the hole for the plate is too short, it could have been done better and fit it perfectly. This detail is the only thing that differs from the original.
Review translated automatically
Reliable opinion
Jawa 350 TS 1989 The material is perfect, the reproduction of the original is also at the highest level. Installation by heat - just slightly heat the rubber and set it on the handlebars. After a few minutes we have a beautiful new and safe "handle". Recommended.
Review translated automatically
Reliable opinion
RECOMMEND !!! Store super :) have all the parts - contact satisfactory.Good quality parts - large selection Fast delivery ! ! ! Effects of work and new parts in the picture :)
Review translated automatically
Reliable opinion
The gas handle and rubber relative to each other fit well, the rubber goes tightly on the handle. Rubber could be better finished has casting tabs to remove by itself.
Review translated automatically
Reliable opinion
I recommend this body is great. Easy to install and at a good price. If you need a good gas roller mount it is great. I wholeheartedly recommend it.
Review translated automatically
Reliable opinion
Product of good quality rubber on the handle grips well. perfect fit for handlebars .Nice replacement for a low price
Review translated automatically
Reliable opinion
Wt-4 gas handle body very good quality material fits without any problem I recommend to everyone to scooter
Review translated automatically
Reliable opinion
Everything is as described. Fits perfectly with the original steering wheel. Good workmanship good rubber. I recommend
Review translated automatically
Reliable opinion
Qt-4 gas handle very well made with attention to detail fits without a problem recommend to all
Review translated automatically
Reliable opinion
Mz etz 250 material good and workmanship Great nice appearance, workmanship aesthetic. I recommend!
Review translated automatically
Reliable opinion
Mz etz 250 material good and workmanship Great nice appearance, workmanship aesthetic. I recommend!
Review translated automatically
Reliable opinion
I own a 1988 Simson SR50. My Simson this year celebrates its 30th birthday so I made it a general overhaul of the engine, of course I ordered everything from Gmoto store. Parts that I ordered for simson in Gmoto always fit and also this maneuver perfectly matched, and prices not exorbitant compared to other stores. Contact with the staff fast and pleasant and fast delivery. Gmoto store as much as possible PLUS I recommend to everyone who owns older as well as newer scooters or motorcycles. Gmoto has it all!!!
Review translated automatically
Reliable opinion
Rollgas was not able to be attached to the Chinese quad 125 despite many attempts and ways and quite a bit of experience in mechanics :/ In the middle of the gas handlebar there was something like a guide for the cable and separately a slide on which the cable was supposed to go. NIesthetically, it was impossible to twist it in such a way that the slide would not fall out of its place inside the handle. Due to the fact that I am not petite I did not make a complaint, because the cent of this set was small :)
Review translated automatically
Reliable opinion
I own an Mz 150 and am starting to restore it. I bought this motorcycle in a state of decay, so to speak, and every detail matters to me. I'm glad I found a store where I could buy most of the missing things to fulfill my dream. Even such an item as a rubber for the handlebars, maybe a cliché but it can not be missing, it is made solidly and aesthetically pleasing which will only add to the image of my deity. I recommend the Seller
Review translated automatically
Reliable opinion
I've been repairing a neighbor's MZ that he has had since new for a few days. I'm glad that the quality of parts on gmoto is so good that I can give it back to him with peace of mind looking at his amazing smile. I always had a lot of problems replacing steering wheel rubbers. This time I was shocked at how well fitted and made the rubber from gmoto is. All it took was a few drops of oil and the rubber was installed with ease. I highly recommend it!
Review translated automatically
Reliable opinion
Dear users in my opinion this rolkaz is great, it responds nicely to the gas. Handles that came with the kit are soft and grip well also great respect! The cable is univerlasla, it fits the rolgaz. I rate these products very good because after this I have not yet replaced anything. If you were to buy I recommend this product, it is really worthy of recommendation !
Review translated automatically
Reliable opinion
Rolgaz -metal housing, aesthetically made with the gas manoeuvres and cable at this price is a great product. Very good performing manoeuvres in enduro, comfortable. The second time I bought this product for another motorcycle in full knowledge and I am very satisfied. I would like to add that I have checked that on this rollgaz also fit branded cuffs from well-known companies without any problem.
Review translated automatically
Reliable opinion
It fits my Mosquito, but I use only the metal part of the rolgaz, the rubber part without the inscription Romet is not made very well if you want maximum convergence with the original, I do not recommend, if you do not care about convergence with the original, it can be, although the aesthetics of performance does not knock (talking about the rubber part)
Review translated automatically
Reliable opinion
The metal from which the handlebar is made seems to be quite solid and fits on the original handlebars. As for the rubber, you can complain ( the rubber is fairly soft, but you could try to get a better cutout). The fit of the rubber to the metal is quite good. The rubber enters tightly and does not slip.
Review translated automatically
Reliable opinion
The gas line perfectly fits Hercules Sachs AM5. Made of good material,which will serve for a long time.What's cool the cable has adjustments. Handles also of good quality, they look nice on the moto and hold the hand. The price for the whole set is very good, for such a quality product.
Review translated automatically
Reliable opinion
Handlebars nicely made thanks to indentations in the rubber, the grip on the steering wheel is much safer, it's just a pity that the plastic in which the end of the cable sits is made of poor material, but for 12 PLN it's ok I recommend everyone fast shipping nice service greetings
Review translated automatically
Reliable opinion
In my case, the hole for the steering wheel is too small. I also bought the steering wheel new. It is very difficult to put on and if you succeed and did not break, then when turning you have to be careful not to tighten too much and not to break the thread. And you need to tighten because the handlebar does not turn loosely.
Review translated automatically
Reliable opinion
The maneuver is well made, but there is one minus where the cable goes is too large hole and the cable goes inside. in the set would be useful some kind of taper for this cable besides, I highly recommend to buy this product, it is at a very low price cordial greetings.
Review translated automatically
Reliable opinion
Romet ogar 200 - the handle fits like the original, the place for the cable is fine, the aesthetics of the workmanship is very good, admittedly it is not like the original, but very similar, after installation you can immediately not realize that it was replaced. I recommend to everyone
Review translated automatically
Reliable opinion
I bought for Romet Ogara 200, it fits very well, it is worth buying a new limiter and lubricate it from the inside. the only drawback is the problem with the insertion of this "hammer" from the gas line ( also new), it enters very tightly and I had to enlarge the place a little.
Review translated automatically
Reliable opinion
2004 Yamaha DT 50. I ordered a handle along with a rolgaz and a gas line, I honestly expected that for such a price I would get just anything, I was wrong the set meets my expectations and even more :) With a clear conscience I can recommend it to anyone.
Review translated automatically
Reliable opinion
The set for its price very nice handles nicely despite riding with gloves. After lubrication and about 3 km of driving the roller has arrived and bounces nicely. I recommend if someone is looking for not expensive but good, I recommend easy installation.
Review translated automatically
Reliable opinion
I ride enduro I need a quick response to the gas and when I let it go the handle. As much as possible fulfills its function. The aluminum body of the rolgaz testifies to the strength of the handle cool response to the gas and nothing jams. I recommend.
Review translated automatically
Reliable opinion
Gas handle ok, fits and works as expected. The rubber of the handle fits, but the workmanship is not very beautiful. Requires cosmetics. For my moped Romet Kadet M780. I have it since new, that is, since 1980. I also have a 1984 Honda CB 650 SC ;-)
Review translated automatically
Reliable opinion
Very good equipment, at a good price. Sits perfectly does not fly, even the color matches the motorcycle. Delivery was also fast. I simply have nothing to complain about. If you want good equipment then only Gmoto.pl. I recommend.
Review translated automatically
Reliable opinion
I am very satisfied, more than once I have used various rolgazy even with a value of more than 100zl, and despite this one, which is much cheaper And is additionally with grips And rope, works best And is the safest to use.
Review translated automatically
Reliable opinion
The product does not fulfill its role. The handle constantly falls off the handle. The original locking screw does not fit the handle, so there is nothing to lock it with. I already bought another metal one with a rubber handle and now it is ok.
Review translated automatically
Reliable opinion
Rolgaz purchased as one of the many components of the full cross project. It worked perfectly on top of that, along with the rolgaz I received a wrench for installation. Great quality and really good price. I recommend. Jakub Mielczarek.
Review translated automatically
Reliable opinion
The grip is of average workmanship, as there are pieces of rubber, which does not look too aesthetically pleasing, but this is shown in the photos. The material from which the grip is made is of good quality. A cool grip for the price.
Review translated automatically
Reliable opinion
I purchased a set of universal rolgaz with cable and right-hand handle for Aprila Af 1 of the year 1991. The aesthetics of the set at a high level. Installation is child's play, a big plus is the adjustment on the rolgaz and the cable itself!
Review translated automatically
Reliable opinion
Komar 2328 (without gears), capacity 50cm3, 2400km mileage, year 1973 The handle meets my expectations. Installation without problems, slightly different in appearance of the rubber from the original, but structurally perfectly reproduced.
Review translated automatically
Reliable opinion
The product has a good finish, fit and attachment to the handlebars nicely matched corolla. What I like most is the texture of the gas handlebar. But the biggest plus is the cable routing inside the handlebar.
Review translated automatically
Reliable opinion
BASHAN bs250s-11b - the set fits 100%. Just remove the old one ( for the thumb) and install the new one. Remember to lubricate the rol-gas and the handlebar well from the inside before final screwing to the steering wheel:)
Review translated automatically
Reliable opinion
Romet ogar 200 86r This is another of my manoeuvres bought at Gmoto.pl As for the current quality of romet parts, I think that the workmanship is good and the price is also ok a small drawback is that it is not made of rubber.
Review translated automatically
Reliable opinion