transmission sprocket very well made, fits perfectly, fits under the serial chain (under 420), well-made threads compared to other sprockets at the same price I had, 14 teeth will allow you to achieve quite a high top speed, for this price I have not met with a better such product.
Putting it on the previously used drivetrain, there was no problem with the alignment of the chain.
Having the 11/53 drivetrain, the sprocket will also fit under the chain without any problems. :))
For this price really very good product :D.
The slipper is well made, although the price for such a slipper is too high, the slipper is smaller than the serial one, which means that when the chain is not stretched enough or you drive through really big ruts / overhills it continues to hit the swingarm. As for the material, in my opinion it is also too rubbery, it wipes out literally after a while, and mine, although it was screwed on well and carefully, not too tight, unfortunately it broke after less than 50 kilometers, the product fits nicely, and what I still like is that it is more hidden than the serial, although it could be, as I said a little harder and slippery so that the chain passes smoothly through it and not cut into it.
Stator overall of good quality. The wires and their thickness I rate better than in the original part I had (Aprilia SX 50D50B0), while their location does not allow you to route them perfectly as in the original part. When the stator is mounted so that the wires come out of the crankcase perfectly, the ignition is completely misaligned. On the other hand, when the ignition is properly adjusted, the wires come out in a different place than they should. The length of the wires is sufficient. The mounting holes are well measured.
As a replacement as much as possible, but the turn signal switch original goes harder, has a more pronounced click of disengagement, which in my opinion is better. Additional information for those interested - this is the switch itself, which is inserted into the place in the clutch handle. to mount it separately from the handle you need to make a bracket.
I have a Derbi Senda 125 motorcycle and I always order parts for Senda as well as for the scooter only on Gmoto, because I believe that here are good quality products as well as at affordable prices and fast delivery, and the installation of the sprocket went quickly and smoothly for me without any problem. I recommend the company Gmoto.pl
I recommend!!! I am very satisfied with the switch I purchased. Very bargain price and high quality material not different from the original.Photos attached to the ad show 100% what you get in the shipment.
Hi order some different things but the one I would consider the studs and spark plugs etc are as it should be absolutely perfect and cheaper on gmoto than all other websites for moped parts
Parts for aprilia rx 50cc 2013 vintage
Derbi Senda R 50 2005 I recommend the product 100%, the installation went without a problem product fit aesthetics also at a high level, to the quality of the material without complaint very high level. I highly recommend!!!
I also ordered from this company a footer and a spring for the footer. There are no objections to the workmanship. You can supposedly make it yourself, but why when you can order it here. More problems with drilling and grinding. I recommend.
Hello I own a Rieju MRT 50 this sensor fits perfectly to install it you have to spend 2 minutes so a little off topic the sensor was supposed to come in about 20 days came after 4 working days I recommend.