Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Barton Firefox 50 2T - Page 4
Manufacturer
Price
Sort
Options +4 średnica:
średnica:
Podobne:
średnica:
€2.11
Bearing 6200 - 74553
from 6
Browse by manufacturer
Products reviews
Junak 104 2T 2013 Very nicely made cylinder for reasonable money If someone gets clogged with a serial cylinder, an interesting solution is to buy this cylinder, for this nozzle is 0.10 more than before and for a little money we have a really dynamic equipment I have already driven 2500 km on this cylinder without any reservations Please do not expect a colossal difference in power compared to the series in my opinion, thanks to this cylinder significantly increases the torque and a little power at higher revs. + Good price + Relatively good performance + Inexpensive way to increase power -Very loose rings which makes it hard to put the cylinder on (once you put it on they come off very nicely) - Sfloor locks are difficult to turn (the push-in ones are better) - Too bad there is no exhaust gasket in the set Final rating: 9/10
Review translated automatically
Reliable opinion
Scooter inca street 50 year of production 2009 mileage of about 14000 I ordered a cylinder + heads 70ccm reason to reduce fatigue of the engine, after opening the box with the parts I started by inspecting the workmanship, I watched all the channels in which there are in the cylinder the workmanship itself is very good, the very tinkerer went through very easily from disassembly after assembly it took me 40 minutes if anyone has the idea to repair vehicles themselves it will do it in a similar or shorter time, currently taken picture is not fully visible but they are newly purchased things
Review translated automatically
Reliable opinion
My so called hobby is repairing. I currently own 3 motorcycles which are , Romet pony motorynka 1986 year which I have already 5 years , scooter Zipp toxic 2008r in a very elegant condition , and the third scooter jailong monsun is one typically for younger people because it is a little smaller and that's it ;)
Review translated automatically
Reliable opinion
Zipp Rooster 50cc 2008 AC I am 100% satisfied with my purchase. Easy installation, everything fit perfectly. The product has met my expectations. Currently drove about 2500km on this kit and no problems. Everything made with attention to detail.
Review translated automatically
Reliable opinion
Hello, I own a motorcycle-scooter zumico eos, 50cc 2t, 2009 year, I purchased an oil pump drive wheel. The product fits the model perfectly, solidly made and aesthetically packaged, installation relatively easy. I recommend !
Review translated automatically
Reliable opinion
Zipp quantum from the year 2005.50ccm.2T.It fit perfectly.After replacement completely different engine work.I added pictures of how the diaphragm should not look like.Remember no gaps on the plates.Here a picture of the damaged one.
Review translated automatically
Reliable opinion
Everything works as it should after fitting this spark plug the scooter started to fire up nicely and ride the performance is also not bad I can recommend it as much as possible ;)
Review translated automatically
Reliable opinion
Keeway Hurricane 2t scooter. Carburetor fits as well as possible, very good value for money. I recommend to all buyers.
Review translated automatically
Reliable opinion
Zumico EOS original 50cc currently 70cc on parts from this site performs very well durability good recommend highly.
Review translated automatically
Reliable opinion
The Naraku V.2 70cc complete cylinder for the Minarelli horizontal AC is a product that has made a very positive impression on me, both in terms of build quality and performance after installation. First of all, the cylinder is well-designed and precisely manufactured, which is crucial for such components to ensure adequate life and proper functioning of the engine. Immediately you can see that the materials used in its manufacture are of high quality, which contributes to the durability and strength of the unit. After installing the cylinder, I noticed a marked increase in the performance of the scooter. The power of the engine has increased, and the acceleration has become more dynamic, which is especially noticeable when riding in the city. This cylinder works perfectly with the Minarelli horizontal AC system, and I had no problems with its fitment. The assembly went without much difficulty, the parts fit perfectly, which means that the precision of workmanship is at a high level. As for aesthetics, the cylinder looks very good. You can see that the manufacturer has taken care not only of functionality, but also of the appearance of the product. The overall design is solid, and the finish gives it a modern look. While this is not a key aspect for this type of part, it is certainly nice to have a good-looking component in your vehicle. From a practical point of view, the Naraku V.2 70cc cylinder is recommended for those who want to slightly increase the performance of their scooter, while keeping the price reasonable. However, it should be remembered that along with replacing the cylinder with a larger one, it is also necessary to adjust other engine components, such as the carburetor and exhaust system, to be able to fully exploit the potential of the new cylinder. The cylinder itself works flawlessly, but how much power can be squeezed out will depend on the rest of the setup. All in all, the Naraku V.2 70cc complete cylinder is a solid choice for those looking for a good compromise between price and quality. Its durability, aesthetics and ease of installation make it a product that does its job and significantly improves scooter performance. It's worth considering, especially if you're looking for a durable and effective unit that will enhance your vehicle's performance.
Review translated automatically
Reliable opinion
I bought the cylinder, piston and head for a 2000 CPI Hussar scooter, changing the factory 50 cc to a purchased 70 cc. Visual assessment of the quality of materials and workmanship is not objectionable. Both the installation and the first start-up without problems. The piston and cylinder are only in the run-in phase, nevertheless, the performance of the engine is flawless, and the power has clearly increased (assessed in terms of top speed).
Review translated automatically
Reliable opinion
Some time ago I ordered these variator rollers and they arrived very quickly when I mounted them to my scooter The scooter has become more aggressive has more power, the rollers are perfectly matched to the variator I have in my scooter improve the power of the scooter and speed. It was a very good choice that I made I recommend these rollers variator better scooter picks up and has.more power
Review translated automatically
Reliable opinion
Zipp Quantum, good quality cylinder, very good price. In general, I recommend so far everything rides like from the factory and I hope it will serve a long time. The scooter is much more dynamic, v-max has improved. Riding has become much more pleasant than on a 50cc I really like Gmoto store because I can order many different things with one shipment. And as for the cylinder I highly recommend
Review translated automatically
Reliable opinion
"After installing the 70 2T cylinder and head in my scooter, I immediately felt the difference. The scooter has gained power and acceleration, which makes riding more dynamic and satisfying. The solid workmanship of these parts gives me confidence that they are not only efficient, but also durable. Now I can enjoy a smoother and more exciting ride!"
Review translated automatically
Reliable opinion
Aprilia SR 50 AC cylinder fits very perfectly beautifully made nothing sticks out no blemishes on the outside no ducts can be seen no holes nothing sticks out inside which greatly affects the quality and flow resulting in smooth power output and life tests but the predecessor of unknown origin seized up after 10 km deflated like a balloon
Review translated automatically
Reliable opinion
I am very satisfied I read the opinion of these cylinders on the forums and I find that people do not rightly embed cheap cylinders I have and my Ferro 803 years like crazy I understand that someone has more money and flies thick with purchases of good branded parts I do not need it and I appeal to others Chinese does not mean bad greetings gmoto
Review translated automatically
Reliable opinion
Inca street 2t 50 . After purchase stator fits very well scooter fires up . Fitting to the model of scooter very good , aesthetically also very good but one small problem is the base of dur aluminum which is fragile. However, you can not hold a grudge against the store . goods most importantly consistent with the description .
Review translated automatically
Reliable opinion
I currently have a Toros f16 scooter.One day my turn signals did not work so I ordered a turn signal interrupter because the previous one burned out installation was quick and easy.And then I bought a gas switch because the previous one did not suck in the fuel I bought the product was as described I am very pleased.
Review translated automatically
Reliable opinion
Kreidler Rmc-c 50cc scooter. I ordered this kit quality of workmanship very good everything fits nicely overall I am satisfied. I ordered this cylinder about a week ago. I just received it everything in is fine. I recommend to each individual and most importantly very fast shipping.
Review translated automatically
Reliable opinion
WSK 125. stator fits, which can not be said about the made CDI ignition for this motorcycle. Due to this very workmanship, I had to additionally buy a new stator, as the one there was damaged by the magneto working too closely. In addition, I had to improve the stator base.
Review translated automatically
Reliable opinion
Zico simpli 2t, 2006r, 7500 km mileage, unfortunately, but the cylinder did not meet my expectations, the poor quality of workmanship unfortunately determined the decision to return the product, the cylinder had fatally finished windows in the sleeve, I was afraid that the rings would begin to hook against them and crack,
Review translated automatically
Reliable opinion
The cylinder is of good quality, the only thing I would complain about is the quality of machining of the flushing channels. They are not symmetrical with respect to each other (I mean those smaller flushes) but what to expect for such a price? For this kind of money anyway it is mega positive.
Review translated automatically
Reliable opinion
I own a KTM go 50/70 kit is generally ok everything fits as a budget kit meets its requirements. I only have a remark because I heard that with harsh lapping the piston can melt. I would recommend lapping carefully and pour good oil for example motul 710
Review translated automatically
Reliable opinion
I have a scooter Cpi popcorn 50 the whole kit came quickly it was well packaged I put this kit in the motorcycle and everything runs very well the power increased a lot the kit is cheap and good I highly recommend it. Unfortunately I have no pictures but everything looked good
Review translated automatically
Reliable opinion
Barton Falcon 30, displacement 50cm^3, 2014r, mont without the slightest problems. Some design flaws have been corrected compared to the factory carburetor, even adjustment was basically not required. The quality of the casting itself could be slightly better.
Review translated automatically
Reliable opinion
Carburetor from moretti company, fits interchangeably with "thin suction" carburetors. Designed for Chinese scooters in 2t. The carburetor required minimal adjustment after installation. It has nozzles that work well with the original filter with tube (block).
Review translated automatically
Reliable opinion
Coil installed in my Zipp Quantum, visibly stronger spark, scooter smokes better , fast shipping realized by Gmoto store, I highly recommend the product and shopping in this store, everything as always at the highest level.
Review translated automatically
Reliable opinion
Malaguti F12 Phantom 70ccm scooter 2002 year,piston performance at such a price very good I did not expect. Piston nicely packaged, rings and pin fit perfectly. I would send a picture but already in the engine laughs.
Review translated automatically
Reliable opinion
Malaguti F12 Phantom 70ccm scooter 2002 year,piston performance at such a price very good I did not expect. Piston nicely packaged, rings and pin fit perfectly. I would send a picture but already in the engine laughs.
Review translated automatically
Reliable opinion
I ordered this cylinder for my scooter barton orlando,assembly went without a problem,good fit of the components,after assembling everything pyrked for the 3rd kick I still smoke from the first :) I heartily recommend !
Review translated automatically
Reliable opinion
The product is made very well the holes all fit well into the channels,very good quality material it is made the piston the same very nice I would only recommend buying parts from Gmoto Lancut thank you.
Review translated automatically
Reliable opinion
I own a scooter zipp otis 2t to which I bought a carburetor from company Gmoto.pl with which I am very pleased. Scooter on a new carburetor from company Gmoto.pl goes like a dream I recommend this company to everyone GREAT POSITIVE.
Review translated automatically
Reliable opinion
Top workmanship, super insulated and shielded. Moisture formation almost impossible. Also the spark plug super quality...The ignition coil will probably survive a few mopeds...as always delivered quickly
Review translated automatically
Reliable opinion
Keeway hurricane 50 year 2008 the quality of the product surprised me a lot. All original as with the series in keeway hurricane. The equipment does its job very well starts And is well fitted.
Review translated automatically
Reliable opinion
Hello the head and cylinder fit the Junak 607, the installation went very smoothly and quickly, all the parts fit together as well as possible. The quality of workmanship is very good. I heartily recommend
Review translated automatically
Reliable opinion
Everything fits like a glove,and the engine after replacing these parts runs better and nicer than on the original ones.I AM VERY SATISFIED AND (I REMEMBER I AM SATISFIED WITH ALL MY ORDERS FROM YOU).
Review translated automatically
Reliable opinion
Yamaha YN 50 I highly recommend this cylinder with the head sits all right, it runs like a dream I highly recommend this store and this product yesterday I screwed in and it flies also regards and recommend.
Review translated automatically
Reliable opinion
Write what kind of motorcycle you have (make, model, capacity, year) and share your opinion about the product. Zumico Ignis 50 2009 Very good quality fit very well and improved the performance of my scooter
Review translated automatically
Reliable opinion
The piston I purchased from this store gives the impression of being well made except that the holes in the piston could have been better finished. The piston does not swell and you can feel the difference between the one I had before.
Review translated automatically
Reliable opinion
The 2T ignition coil provides powerful ignition, improves engine performance and smoothness. With its design, it promotes smooth engine operation, improving performance and responsiveness.
Review translated automatically
Reliable opinion