Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Barton Sprint 2 50
Browse by manufacturer
Products reviews
I ordered a crankcase for a Junak 902 - although it is listed as "fits to" on the item page, unfortunately it is not a perfect fit. Unlike the original, it does not have an input for the shift sensor cable.
Review translated automatically
Reliable opinion
Zumico GR200. The engine fits perfectly, I had no problems in mounting it to the frame. The engine runs perfectly, smokes from a shot. Fast delivery. Recommended.
Review translated automatically
Reliable opinion
Romet ogar 202 valves fit perfect fit after reaching them nothing leaks burns on touch 3 sec starter and burns bdb recommend in 100% :)
Review translated automatically
Reliable opinion
No possibility of replacing the timing chain for the 139FMB engine which turned out to be too long . Not recommended.
Review translated automatically
Reliable opinion
Engine received quickly, there was a lot of oil in the box but that's because of the carrier, otherwise the engine is great, I mounted it on my masai greystone 50 and it's really plug and play, you just have to connect the cables. On the other hand, the double-branch gear selector doesn't fit on the masai greystone and neither does the kick, so I kept the ones on the original engine, but otherwise everything fits perfectly. I'm really satisfied with the engine and with Gmoto! I highly recommend it!
Review translated automatically
Reliable opinion
Howdy.I purchased a 11 tooth front sprocket from gmoto.I was surprised that I only paid 10 zloty for this product as it is from a decent company.I own a street 50 moped and there were no problems with the sprocket.It fits perfectly on a 428 120 link chain.According to me,the power seems to have increased a bit but the v max has decreased.If we try a bit harder and shoot the clutch we will be able to ride on 1 wheel.I warmly and sincerely salute g moto for their excellent and quality products.
Review translated automatically
Reliable opinion
The radiator performs very well and you can feel the difference on hot days when engine cooling is a little worse. The kit fit perfectly and there was no problem with installation. In my case, you had to tighten those nuts at the oil outflow and inflow because they were poorly tightened. Likewise, you had to buy tourniquets because the original ones did not lapped very tightly u could see the oil leak. These are penny issues and they fixed the problem.
Review translated automatically
Reliable opinion
The cooler looks to be of good quality. The only downside is that I'd have liked several types of fasteners, because I'm not sure the two metal lugs will hold up over time. They look like cheap aluminum. And there's no silent block supplied to dampen vibrations a little for the radiator. After that, I'm a handyman, so no worries for me. Assembled in half an hour. Would recommend.
Review translated automatically
Reliable opinion
very fast delivery was pleasantly surprised . To the product looks very good exactly as described . Was of the opinion the motor is produced in Taiwan . This is not so product in China. Well look ma times . Will install the engine in a KIKKER 5150 . the current one with the semi-automatic is not my taste . hopefully it has the power of 12 hp as stated in the description .
Review translated automatically
Reliable opinion
Quad ATV 110, I do not know from which year but somewhere around 2003-2007 Very good quality product everything fit like the original, there were no problems with installation. After installation the starter finally worked ;) Sorry but I did not take pictures :( I did not have time to do so because the children already wanted to ride the quad
Review translated automatically
Reliable opinion
Now my starter is working properly I bought this because I ran out of brushes and I often use the starter through an electric starter to start the engine, as for the price it is worth it and as for the difficulty of assembly I rate 5 stars for a layman in my opinion it is trivial but, as you know, it happens differently Greetings :D
Review translated automatically
Reliable opinion
Mám junak 902 chopper rok 2021 o pojemnosti 50 ccm wsedlem na gmoto wiszukal gaznik z dopasowanie do mojej stroje . Unfortunately gaznik tak dopasowany zie wse treba prerabiet from the gas line to the filter tím prosek o zmiany w dopasowanie na czensti Bo to niepasuje produkt chinsky bez jakosti dopraczowania
Review translated automatically
Reliable opinion
The quality makes a very good impression. Shipping was very fast and everything I ordered was securely packed. Really helpful for installation and removal. For me, 1000 times better for the price than sending the nut off with the hammer and driver.
Review translated automatically
Reliable opinion
Hello, The valve clearance seems to be of good quality. Only the exhaust valve head is slightly smaller in diameter than the original one. See after running in if the contact surface is sufficient. Gmoto, a responsive team and fast delivery. I recommend Gmoto.
Review translated automatically
Reliable opinion
Runs fine, pulls really well. However, I think it shakes a little when you get up to 8000 rpm, so I do not do that. I have geared the moped on the chain, so the rpm comes down. Coming down, but it can easily pull an even higher gearing if I want to go faster. Now driving approx. 85kmt
Review translated automatically
Reliable opinion
I own a 2020 Apollo Avenger 125 Quad the sprocket was easy to install and I think it is made of durable material. It looks pretty good for the price, and fits like a glove. The 12 teeth fit perfectly, the chain is not too tight and the quad has better performance.
Review translated automatically
Reliable opinion
The paper ones not very decent though would have sufficed,but unfortunately they were glued to the film so that I destroyed most of them trying to peel them off [I did it very gently].The only thing that came in handy for me was the head gasket,exhaust and orings.
Review translated automatically
Reliable opinion
Moped - Barton Fighter Eco 2020 This is not an oring for 139FMB !!! Too small in diameter and too thin. 139FMB has an ebonite washer with a passage diameter of 20.5 mm. This oring, on the other hand, fits a different washer, with a passage diameter of 17 mm.
Review translated automatically
Reliable opinion
So yes the sprocket I ordered is a very good fit for the Honda 450 and very nice to ride however ze first 2 days it was not nice to ride because the sprocket was popping off the shaft but on the 3rd day of riding it is fine I give 5.
Review translated automatically
Reliable opinion
All about. Assembly without complaint, but I chose a low-compatible part. My fault. Greetings. The regulator is oki,but it gives very high current. It is about 26.v. I suspect the stator. Goods as described and from your side everything on 5!!!
Review translated automatically
Reliable opinion
The quality makes a very good impression. The look and fit are the same as the original part I replaced with it. Shipping was very fast, everything I ordered was securely packed.
Review translated automatically
Reliable opinion
good products unfortunately it broke at the tightening certainly an error of my share but I recommend the site several times that I order above and it and really genial price less expensive and product of quality
Review translated automatically
Reliable opinion
Moped Romet ogar 900.I had to change the timing because my oil pump seized and ate that would on the sprocket. I recommend this repair kit fits without any problem and the quality is good. Well, and the price is low. I recommend
Review translated automatically
Reliable opinion
Hello, I bought a remote control shaft for a benzer yankee 50 moped. super store super seller. Fast shipping. The motorcycle after repairing the gearbox hula like this doll. I will certainly use their offer again thank you.
Review translated automatically
Reliable opinion
I own a Router WS 50 I installed this sprocket in 15minutes and I highly recommend it looks very nice and durable I highly recommend the sprocket has already traveled about 500km and shows no signs of use. I recommend
Review translated automatically
Reliable opinion
A set of seals for engines in the starter version. Great workmanship, everything fits perfectly into the crankcases. Flexible rubber for long-lasting use without replacement.
Review translated automatically
Reliable opinion
After ordering the product, I did not expect to get it earlier than it was described, I got the product 1 earlier than the scheduled delivery, the product well protected in the shipment, it works flawlessly :)
Review translated automatically
Reliable opinion
The wrench fitted to the clutch nut easily unscrewed and also tightened the clutch a plus is that it has two sizes for the nuts and also that it even fits most "ratchet" wrenches without problems
Review translated automatically
Reliable opinion
Kinroad Chopper XT50Q. Description of the product consistent with super quality,descriptive attachment of the installation and explained connection. Fits BMW - Piaggio 125cc. Shipment on time. I recommend everyone to shop at www.gmoto.pl
Review translated automatically
Reliable opinion
A very useful tool. It is better to buy such a wrench than to play with self-made ones. Such a wrench is cheap and very convenient and you do not need some super tools, just an ordinary socket wrench (ratchet).
Review translated automatically
Reliable opinion
Very good material that really cools the engine even at full throttle! I really recommend it for people who have engine overheating problems or who want to upgrade to a 72cc kit.
Review translated automatically
Reliable opinion
The set is just what I expected. Very solid, precisely made with great quality materials. With a clear conscience I recommend, I think that will quietly serve to the end of my Yuniac.
Review translated automatically
Reliable opinion
My old Gaskets after valve adjustment fell apart, this kit took care of the issue perfectly. Nothing drips, everything fits perfectly on Router ws50 with engine after modification to 72. recommend
Review translated automatically
Reliable opinion
Very good, cools well and looks nice connected to the motorcycle. The only problem is the gasket given in the kit, which is shoddy you have to buy additional better ones: Barton FR50
Review translated automatically
Reliable opinion
I own a 2016 ferro 900 I have a 110cc engine in it and it was heating up after I bought this radiator quite a different motorcycle and it doesn't heat up as much I recommend it highly and installation is very quick and easy
Review translated automatically
Reliable opinion
Recommended product, everything is in accordance with the description as well as with the photo, quality at a very good level, the tool fits without any problem, aesthetics of workmanship at a very good level.
Review translated automatically
Reliable opinion
The part fits perfectly. Easy to install and works perfectly. I am very satisfied with the oil cooler. I can absolutely recommend retrofitting the part.
Review translated automatically
Reliable opinion
Shipping time, good communication with the seller, quality of parts, price. In a word I recommend very nice service, if you need help the seller will help therefore I give 5 stars.
Review translated automatically
Reliable opinion
Fits Kingway naked 50 and similar. Very easy installation just unscrew the starter housing, no need to disassemble the engine. Very good quality. I recommend the store as well as the part.
Review translated automatically
Reliable opinion
I recommend ✌️pasuje for Honda MB 80 1980 installation mileage very fast the sprocket as in the description is 12z you can see that it is made of durable material for this price I highly recommend it
Review translated automatically
Reliable opinion