Motorcycle parts
Daelim VJ 125 R Roadwin FI 2007 - Page 2

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2020-05-03, 00:23

View original

Maciej

Wsk 125 The frame is nice, you can't expect more from a plastic metallized one. It fits my wsk-i nicely. The only big minus is that it did not fit completely in the holes - I had to widen the holes with a drill both at the top and bottom. Other than that, installation was easy. I recommend the product for those who don't mind making up holes.

Review translated automatically

Reliable opinion

2023-05-24, 21:04

View original

Dariusz

very good product,easy to install,app to download,connects to your phone via blue tooth and you have everything on the screen of your phone,like charging current,battery condition,monitoring its performance and so on,very useful thing,highly recommend in good conscience

Review translated automatically

Reliable opinion

2021-05-08, 07:38

View original

Andrzej

Plastic license plate frame looks like a good chrome material I changed the plate because I became the owner of a Suzuki Intruder VL 125 2000 year all in all. Looks super material fine that's why the price very low ugly comes longer.

Review translated automatically

Reliable opinion

2020-10-06, 06:56

View original

Mateusz

The gasket of very good quality fits my model perfectly. part of the exhaust no longer comes out sideways so that the sound of the exhaust system work and the correctness of operation is very good. Thank you and recommend

Review translated automatically

Reliable opinion

2019-06-17, 07:58

View original

Damian

In the category of quality/price very nice frame. Strong plastic imitating chrome. Aesthetics at a high level. Lightweight and durable And the license plate enters on contact ( for me a plus because there is no slack). I recommend

Review translated automatically

Reliable opinion

2018-11-23, 07:39

View original

Łukasz

The biggest minus for the shipping time. Zero information about the extension of the shipping time due to the lack of product ( one was for the other they waited for delivery)and I waited 5 days for the package by courier. Product ok.

Review translated automatically

Reliable opinion

2022-08-02, 22:30

View original

Andrzej

I own a 2013 Honda Cb 500 F motorcycle. Pads very good quality, well packaged and I have already ridden are sharp and after reaching are braking well compared to the previous ones are sharper.

Review translated automatically

Reliable opinion

2019-04-12, 07:04

View original

Rafal

I own a motorcycle Daelim Daystar vl 125 prod. year 2006 . Lag seals from ATHENA was a successful purchase because they eliminated leakage from the shock absorbers. Easy and quick installation.P olecam.

Review translated automatically

Reliable opinion

2017-09-04, 10:25

View original

Mariusz

frame very nice, put on jawa ts 350 looks very good on this motorcycle, installation also very pleasant immediately changes the name of the motorcycle adds better charm

Review translated automatically

Reliable opinion

2024-09-25, 05:27

View original

Filip

Very good solution for those who want to replace the license plate frame with a new one. The price is very affordable. The quality of workmanship is also flawless. I can recommend

Review translated automatically

Reliable opinion

2021-01-25, 10:24

View original

Tomek

Daelim Roadwin 125 2006. The filter fits very well and is aesthetically pleasing. The quality of its workmanship is very good, I always order this filter for my motorcycle.

Review translated automatically

Reliable opinion

2023-06-26, 15:34

View original

Przemysław

Professional approach to the customer, assistance at every stage and reliable. Express service, quality at the highest level, great and close-knit team.

Review translated automatically

Reliable opinion

2023-06-26, 15:34

View original

Przemysław

Professional approach to the customer, assistance at every stage and reliable. Express service, quality at the highest level, great and close-knit team.

Review translated automatically

Reliable opinion

2022-04-24, 13:31

View original

Krystian

Motorcycle enduro Beta RR 50 delivery went smoothly Sealers easy to install and despite riding on heavy terrain do not let go I recommend highly.

Review translated automatically

Reliable opinion

2020-03-06, 07:17

View original

Mariusz

TRW pads are a brand in itself. There is nothing to complain about, they fit and work perfectly. Worthy of recommendation for all users.

Review translated automatically

Reliable opinion

2020-05-12, 08:21

View original

Bartek

Honda Varadero 125 2001r fitting and installation seamless. The gasket does its job, no blowouts on the exhaust manifold.

Review translated automatically

Reliable opinion

2018-05-07, 18:15

View original

Magdalena

WSK M6 B3 1982 Very good quality product easy to install. Fits perfectly, looks very good. Frame worth recommending.

Review translated automatically

Reliable opinion

2018-10-23, 18:45

View original

Karol

I own a 2004 Yamahe dt 50 r.The product made very well easy to install.The product did its job as much as possible.

Review translated automatically

Reliable opinion

2023-08-14, 15:03

View original

Janek

I have not yet assembled and do not know how with the fragility of the plastic, but from the outside it looks positive. On the back a slight unpainting.

Review translated automatically

Reliable opinion

2024-03-06, 10:09

View original

Robert

High quality plugs as always from NGK fit very well recommend product worthy of consideration for all motorcycle brands

Review translated automatically

Reliable opinion

2024-10-03, 11:16

View original

Paweł

Original candles, 100% quality. Well packaged. They are already serving in cbr600 F2 for 2 years. Moto fires better and runs evenly.

Review translated automatically

Reliable opinion

2022-01-27, 11:55

View original

Bartek

WSK 125 humpback from 1977. fits perfectly to the gears in wsk, the quality of workmanship very good I think that will serve for many years

Review translated automatically

Reliable opinion

2024-05-02, 18:50

View original

Rafał

Recommended. Great quality. Perfect fit. No blowouts from the exhaust manifold and no more exhaust marks.

Review translated automatically

Reliable opinion

2020-05-25, 21:10

View original

Paweł

The frame mounted on the motorcycle and from today it pleases the eye, I did not want to drill the boards and with the product I am satisfied.

Review translated automatically

Reliable opinion

2024-05-03, 05:43

View original

Jarosław

Once installed, it works flawlessly. I recommend shopping at this store. The break well set up. Original product.

Review translated automatically

Reliable opinion

2020-04-05, 08:45

View original

Tomasz

Honda NSR 125 2002.Solid quality workmanship after installation nothing leaks everything holds well. I recommend!

Review translated automatically

Reliable opinion

2017-12-05, 20:24

View original

Kacper

Chain very well made works nicely well lubricated well adheres to the sprocket I recommend

Review translated automatically

Reliable opinion

2023-06-30, 12:51

View original

Rafał

Recommended. The product is consistent with the photo. Carefully packed in foil, you can see that no one rummaged at it.

Review translated automatically

Reliable opinion

2021-01-25, 10:28

View original

Tomek

Daelim Roadwin 125 2006. Chain of very good quality from DID company. It fits the sprocket perfectly.

Review translated automatically

Reliable opinion

2020-04-17, 17:42

View original

Michał

Hyosung gt 125 on telescopes (not upside down) from 2006 fits perfectly and finally the lags do not leak.

Review translated automatically

Reliable opinion

2017-04-17, 10:05

View original

Kamil

Sealers very good quality athena,I installed in MOTORHISZPANI rx50,highly recommend

Review translated automatically

Reliable opinion

2018-05-24, 10:42

View original

piotr

Motorcycle romet crs 125 of 2011 everything fits nicely.So far I am satisfied nothing leaks

Review translated automatically

Reliable opinion

2017-10-27, 09:17

View original

Patryk

Quad bashan 200 fits perfectly, will definitely last longer than the original, definitely recommend!!!

Review translated automatically

Reliable opinion

2022-08-17, 10:22

View original

Hubert

Unfortunately, the mechanic said that these sealers do not fit the lags of my '82 yamaha xj 550 maxim.

Review translated automatically

Reliable opinion

2019-04-06, 12:00

View original

Tomasz

Very fast shipping parts fit perfectly everything needed for the motorcycle can be found I recommend

Review translated automatically

Reliable opinion

2017-03-17, 22:38

View original

Robert

It all adds up. I purchased for the 2006 Daelim Roadwin VJ 125.

Review translated automatically

Reliable opinion

2016-04-17, 11:42

View original

Nikodem

MZ ETZ 150 - The product is as described. Highly recommended.

Review translated automatically

Reliable opinion

2016-04-10, 12:15

View original

Daniel

atv250, supposedly a good chain, we'll see after the mileage.

Review translated automatically

Reliable opinion

2015-10-25, 13:20

View original

Adam

The chain, as befits a Japanese of high quality.

Review translated automatically

Reliable opinion