Manufacturer
Price
Sort
Podobne:
ilość zębów:
Browse by manufacturer
Products reviews
2019-02-25, 18:42
ForRace
I own a 65cc Baotian BT50QT-9 scooter. The belt cover is probably one of the parts that I find myself replacing quite often. Therefore, there is no point in spending an unknown amount of money on brand-name products, I think you can probably buy two of the same product, in this case the cover, and have another replacement. The product fit perfectly for GY6 4T engines like Baotian, Bassa, Coliber. Also recommend :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-04-28, 07:25
Andrzej
scooter baotian 2008 mileage is not great because 8000 km, purchased a better gasifier than the original, very well matched, the quality of workmanship very accurate which allows for ideal adjustment of the gasifier, not what the old. The scooter got a new life, it runs better than after purchase.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-10-18, 16:31
Jakub
Chinese scooter torq 80ccm 2016. About the cork as it is about the cork much to write, workmanship, fit and quality of materials at a high level, the seal sits as it should, nothing leaks, nothing drips. I recommend this product as much as possible.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-31, 10:14
Cezary
Scooter boatian 50 2000r . Chain of good quality not yet put in I'm waiting for the tools to dismantle the engine, I hope it will serve . consistent with the description elegantly packaged, no factory damage to the chain . I am satisfied .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-11-12, 12:37
Oskar
Hi I have a kingway coliber sport scooter and the belt cover is very good quality it is solid and we are sure it will not break it fits my scooter perfectly , it does its job .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-09, 11:33
Monika
Simering Shaft Sealer left19.8x30x5 for 4t scooter very good quality with attention to detail it is worth replacing when overhauling the engine I recommend to everyone fits without any problem
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-18, 09:39
Mateusz
I recommend the carburetor I purchased the product received as expected I also add that the product is very well protected I recommend Gmoto.pl
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 12:13
Monika
4t 80ccm camshaft very good quality bearings very well made with attention to detail fits without any problem recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-26, 17:36
Monika
Foot starter wheel 8 teeth 4t very well made with attention to detail with high quality materials recommend to all
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-09, 10:00
Monika
Complete 4t carburetor very good quality with attention to detail fits without any problem recommend to everyone fits 4t scooter
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-09, 09:54
Monika
Simering Right Shaft Seal 16.4x30x5 gy6 4t very good quality material fits without any problem I recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-26, 16:57
Monika
Starter shaft fits 4t scooters very good quality materials with attention to detail recommend to all
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 10:50
Monika
Cylinder kopl 4t 90cm3 very well made with attention to detail gives a lot of power to the scooter I recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 12:01
Monika
Gy6 4T timing chain very well made with attention to detail fits without any problem recommend for 4t scooter
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 12:06
Monika
Crankshaft Gg6 4t very good class shaft very strong suitable for strong cylinders 90cm I recommend to all
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 07:17
Monika
Complete 4T carburetor very well made with attention to detail fits without any problem to 4T scooter I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-09, 08:12
Monika
Gy6 4t timing chain very good quality material fits without any problem I recommend to everyone to 4t scooter
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-03, 18:36
TNT147
The crankshaft aesthetically packaged in a cardboard box and styrofoam extrusion arrived with no signs of damage.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-10-18, 16:28
Jakub
Chinese scooter torq 80ccm 2016. Chain well made, perfectly tight, spins until nice. I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-06-14, 22:02
Marek
Kingway Fonero 50 year of production 2007 The carburetor I recently purchased passed my expectations I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-08-24, 05:31
Jari-Matti
14 year old son's first tuning and learning how to install...
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-11-26, 23:02
Mateusz
Motomar Vision 2009r 50ccm3 series .Purchased a carburetor in full working well everything is back to normal scooter stands in the cold after a few days after which it starts without a problem. The only thing is that the slow speed screw at the throttle has a ball end, which is not quite right, but it can be trimmed or replaced with another. Other than that, everything is fully well-fitted installation did not cause any problems and after a long spin the scooter started very nicely.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-05-12, 08:14
Daniel
Cylinder and piston good quality but rings unfortunately not. After 150 km of mileage the gap of the rings after inserting into the cylinder was 3.2 mm Yes does not lie. The engine did not smoke but did not have its power. The solution to this was to put on rings made professionally from good quality materials. The cored rings lasted 13,000 km in a Chinese scooter. In my opinion, it is worth it to buy the made-up rings for 40 PLN than to take apart the engine every 2 weeks.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-05-12, 08:14
Daniel
Cylinder and piston good quality but rings unfortunately not. After 150 km of mileage the gap of the rings after inserting into the cylinder was 3.2 mm Yes does not lie. The engine did not smoke but did not have its power. The solution to this was to put on rings made professionally from good quality materials. The cored rings lasted 13,000 km in a Chinese scooter. In my opinion, it is worth it to buy the made-up rings for 40 PLN than to take apart the engine every 2 weeks.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-11, 17:32
Abramowicz
Zipp G2 Toros F16 - installation went without any problems parts fit perfectly and as for the appearance and aesthetics of the workmanship is good although parts for these vehicles are made with not the greatest care. This was not the first time I bought parts on Gmoto.pl I buy here every time, not only scooter parts but also parts for cars and there is no problem with the assembly, fit and rapid wear of these parts and I am satisfied.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-02-18, 23:01
SYLWESTER
Hello I have a scooter brand kingway fox 50 2009r 50ccm the problem was with the old carburetor so I bought a new one from (gmoto) packed solidly, the carburetor itself at first glance looked okay performance good, the very assembly ran very easily just plug in the hose with fuel and gas line, twist on the bands and you can continue to chulkać on the motorcycle I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-27, 22:54
Adrian
I purchased this shaft for 2008 quest q7 Racing scooter, in my opinion it is really worth making a purchase of this shaft, because the installation went completely without any problems, everything fit perfectly and the most important thing is that the scooter has already done a lot of km on this shaft and does not show any problems, everything runs great simply, I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-27, 09:37
Robert
kingway euroboy 2T -gas tank that I purchased does not fit my model. After consultation with the seller and removal of the old I ordered another one, I hope that this one will fit. Advice: dismantle the part, check the numbers if there are any, or ask the seller for advice. t
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-01, 22:04
Paweł
router delux1 , 2016r - scooter rides like new on this carburetor is identical to the orginał also do not wonder if it will fit or not because it 100% will. I recommend Gmoto.pl because not only is it a reliable company and very friendly service, and the shipment after shipping on the next day is at the klijęta
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-10-24, 09:21
Jakub
I ordered this carburetor with a tentative approach. Recently I cheated myself a lot by ordering a carburetor from an allegro, simply not adjustable. And here a very pleasant surprise installed without any problem, a tiny adjustment of revs and the scooter rides until nice. I recommend products from gmoto.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-08-28, 10:44
Kamil
Well the product is very good with good material it is light so it is very easy to apply it is durable it is very well made so I think it will serve you a long time in my opinion it is worth buying it because as I said it is very durable I know what I am saying well nothing but take it greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-04-10, 11:30
Piotr
Purchased GY6 4T 50 cm3 complete carburetor is a successful purchase and I recommend this product worthily. Very well regulated and works flawlessly, easy to install. Description and fulfillment of the product I put about the price of the 10 highest. Product very good and once again recommend ☺️☺️☺️
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-05, 07:34
Mateusz
I have a Coliber Classic scooter and I ordered this part because my crankshaft that was already in it was byj.w. "wreckage" fortunately I found this site where I ordered a cheap and very good quality product with very fast delivery I really recommend this crankshaft
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-08-21, 17:12
Delbart
Motorcycle ventus sport 4t 2008 year I recommend this product good price top
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-28, 14:01
marcin
Head as for any Chinese is power +30 to horses +30 to awe +100 to fly on the wheel oil no longer takes oil before I had to borrow from my grandfather burned 30l of superol from ursus c 360 now I have no problem with it fitted everything nicely
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-20, 17:37
Wieslaw
Hello all interested parties I can recommend Gmoto Company that the products purchased are of very good quality well packaged and complete shipping fast no and for information to other users of 4t scooter better order parts here because and cheap and good.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-04, 17:18
Krzysztof
For chinchilla 50 4t. It is much better at least with firing. The previous one was already mechanically worn out and that was it. It didn't cure all the problems (such as stalling after quick release of the gas), but this is probably a general wear and tear of everything after 12 thousand. Km.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-13, 12:50
Martin
Fresco Toros 50 4t, I am very satisfied with the products of G-moto.Very nice service and even faster implementation of the order.Parts always fit 100 percent and as for the quality I am also very satisfied ! Thank you and recommend. Martin.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-08, 20:42
wiktoria
very fast shipping very easy assembly, I got the product just as it was shown in the picture without any damage recommend gmoto.pl :) everything was clear from and fast shipping and very fast contact with employees in case of detailed questions
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-21, 07:46
Kacper
I will say briefly that's why I gave the quality of the material 4 because the original what was in this scooter is better but it's not just your fault or that company that makes it because the parts even of good quality greetings and encourage you to buy matching very good.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion






































