Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Honda CB 125 F CBS 2025
Manufacturer
Price
Sort
Options +2 
€76.07
Lowest price from 30 days before discount: €101.42
Highsider CNC LED Indicators Little Bronx, Black, Tinted Glass, E-Approved, (Pair) - 204-2860
from 2
Browse by manufacturer
Products reviews
For my Hondas FT 500 (1983) & XBR 500 (1986) as spares. Remove the lever first, then punch out the old one from the contact pins side; it's an easy, light press fit. When pressing in the new one, align the hook on the switch with the notch in the clutch lever body. Note the hole in the switch also lines up with a hole at the underside of the alu body; it's for contact spray when needed. (Better use it before needed; once corroded the inner contact becomes difficult).
Review translated automatically
Reliable opinion
Yamaha DT125. When replacing the brake fluid, it turned out that my caps were scarred and not suitable for re-installation. I regretted that when I bought the fluid I did not order the caps right away, because they cost pennies, and ordering separately more expensive would be the shipping alone. Therefore, I recommend if you only have doubts about your hoods. They are flexible, they probably fit all diameters of vent valves, the extra eyelet guarantees that you will not lose them.
Review translated automatically
Reliable opinion
Affairs, it conducts electricity. However, it does not fit the 1976 GL1000 K1 model, as it has a larger diameter than the original (factory) and will not go into the hole in the handle holder. I had to take the original one apart despite the damage and was able to repair it. Perhaps this one will fit the specified GL1000 78-79 but I will check this when I give it to a colleague. It would be good to have the basic dimensions plotted on the parts in the photo to see if it will fit us.
Review translated automatically
Reliable opinion
Yamaha YZF R1 2004 and Honda quad 250, caps made solidly for sure will not tear, fit perfectly into the air vent nothing stands out - they are not too loose. If anyone has this model of Yamaha or quad I recommend it
Review translated automatically
Reliable opinion