Forgot password
Order status
Free delivery from 150 euro
![Tourmax 7.5 [2.45mm] valve plate.](https://img.gmoto.pl/12305/plytka-zaworowa-sr-75x245mm_1_m2.webp)
Options +2 
Browse by manufacturer
Products reviews
I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.
Review translated automatically
Reliable opinion
Honda Africa XRV 750 - 1999. I bought 12 pieces. This mounting rubber is found in several places on the motorcycle(the mount of the skull rack, oil cooler, plastic handles, etc.). It looks like the original, the rubber is flexible, you can bend it with two fingers with a stronger squeeze and it looks solid. Only the course of time can verify whether it is as solid. Dimensions: Hole diameter(nominal): 10mm Width of the entire rubber: 22mm Groove depth: 8mm
Review translated automatically
Reliable opinion
Honda CBR F4i 2003. The pins as fit the fairing assembly, quite wide but everywhere where you need to use them whole luckily they are invisible. They did not crack during installation so the quality is fine. Personally I can recommend because I am satisfied.
Review translated automatically
Reliable opinion
Honda st 1300 2002 , the motorcycle has its years at the time of purchase of the machine and the first inspection it turned out that the pins are "worn out" new ones I could not find anywhere , of course on Gmoto there was no problem with the availability ;)
Review translated automatically
Reliable opinion
We fitted the bearings to a 2004 Honda Hornet pc36. The installation went smoothly and the bearings seem indestructible ;) Well, but this is Mc International after all, the top shelf among parts for Japanese ;)
Review translated automatically
Reliable opinion
Honda XL 125 Varadero year 2006. fairing mounting pin fits perfectly, made very solidly, made of strong plastic material. Matched very well to the original, virtually indistinguishable.
Review translated automatically
Reliable opinion
Honda CBR F4i 2003. The pins made correctly but if you have a motorcycle like me, they are only suitable from what I noticed for the battery case, the fairing already falls off .
Review translated automatically
Reliable opinion
The protections, compared to the old ones, are slightly wider, more rigid and more "expandable", which makes them fit perfectly into the groove in the lade blocking the sealers.
Review translated automatically
Reliable opinion
This mounting rubber is a great replacement for the rubbers found on the Honda CBR 600, but they are slightly smaller than the original (I personally didn't mind the installation)
Review translated automatically
Reliable opinion
Honda Varadero 125 2007r (polift) The pin looks and fits the same literally dot to dot as the original. So I confidently recommend the more that the price is better than in ASO
Review translated automatically
Reliable opinion
For honda CBR 600 F4i sport fit perfectly, the studs, despite the rather high price, are really worth it, there is no play in the fairing joints, which was important for me. I recommend!
Review translated automatically
Reliable opinion
Everything ok, the pin fits nicely and holds the fairing well, even after several times of removing the fairing and driving several thousand kilometers everything holds HONDA CBR F4 2000r.
Review translated automatically
Reliable opinion
The product fits my 2005 Suzuki GSF 1200S motorcycle perfectly. It looks solid. I hope it will be durable and last a long time. Overall I recommend.
Review translated automatically
Reliable opinion
Yamaha FJR 1300, vintage 2009, the product does not differ in any way from the original or that purchased from the service. The price for it is dramatically different.
Review translated automatically
Reliable opinion
Honda Cbr 1100 xx vintage 2005 I recommend this store. Everything without the slightest problem. The package came quickly. Well packaged.
Review translated automatically
Reliable opinion
Honda Shadow VT600 1994. The rubber is not yet attached but, it should fit. the workmanship of these is of a high standard.
Review translated automatically
Reliable opinion
Recommended. 100% satisfaction. Full compatibility. Fast delivery, seamless transaction. Thank you and best regards.
Review translated automatically
Reliable opinion
Good product - the aphrodite stopped "buzzing" at higher speeds. I also have the impression that it got a bigger kick ;)
Review translated automatically
Reliable opinion
Compatible and compared with the original, fits perfectly and holds well the parts to which the attachment was made.
Review translated automatically
Reliable opinion
Honda Transalp XL 600 1999. Rubber installed fits it is not orginal but can be goes in its place .
Review translated automatically
Reliable opinion
The installation went without any problems, a perfect fit of the caps and sealers in the Triumph Speed Triple 1050.
Review translated automatically
Reliable opinion
Very nice pegs you can see that they are not made of just anything so I put them on without any problem they look like the original ones
Review translated automatically
Reliable opinion
Suzuki GSXR 600 k4 2004. Fit and quality at a very high level. I recommend 100 percent.
Review translated automatically
Reliable opinion
Very good quality. Fast delivery. This is the umpteenth purchase from this store and as usual everything is ok.
Review translated automatically
Reliable opinion
Everything fits, good value for money. The manufacturing quality of the product is good. Highly recommend.
Review translated automatically
Reliable opinion
Everything fits, good value for money. The manufacturing quality of the product is good. Highly recommend.
Review translated automatically
Reliable opinion
The product made of high quality materials fits perfectly and looks aesthetically pleasing.I sincerely recommend.
Review translated automatically
Reliable opinion
Good quality fast delivery, fits without any problems, recommend !!!!!!!!!!!!! Honda Hornet cb 600 pc 36
Review translated automatically
Reliable opinion
The rubbers fit and hold everything in place. Quality of fit and workmanship without any reservations.
Review translated automatically
Reliable opinion
Honda cbr 600 f4i sport - 2002. Bought the mounting wheel which I installed without any problem. I recommend
Review translated automatically
Reliable opinion
A peg like a peg-it does its job. It holds everything in place. Fit and workmanship ok.
Review translated automatically
Reliable opinion
Honda Varadero 125, parts fit, everything works as expected after installation, quality of goods good.
Review translated automatically
Reliable opinion
I own a 2013 Honda CB 500F motorcycle. the sealer fit, it was well packaged.
Review translated automatically
Reliable opinion
Honda NSR 125 1997. Very useful, just a little expensive.
Review translated automatically
Reliable opinion
We have Motorcycle parts to Honda CBR 1000 Fireblade
- Honda CBR 1000 RR Fireblade 2012
- Honda CBR 1000 RR Fireblade ABS 2012
- Honda CBR 1000 RR Fireblade 2007
- Honda CBR 1000 RR Fireblade 2008
- Honda CBR 1000 RRS Fireblade Edition 2008
- Honda CBR 1000 RR Fireblade 2009
- Honda CBR 1000 RR Fireblade ABS 2009
- Honda CBR 1000 RR Fireblade 2010
- Honda CBR 1000 RR Fireblade ABS 2010
- Honda CBR 1000 RR Fireblade 2011
- Honda CBR 1000 RR Fireblade ABS 2011
- Honda CBR 1000 RA Fireblade ABS 2009
- Honda CBR 1000 RA Fireblade ABS 2010
- Honda CBR 1000 RA Fireblade ABS 2011
- Honda CBR 1000 RA Fireblade ABS 2012
- Honda CBR 1000 RA Fireblade ABS 2013
- Honda CBR 1000 RA Fireblade ABS 2014
- Honda CBR 1000 RA Fireblade ABS 2015
- Honda CBR 1000 RA Fireblade ABS 2016
- Honda CBR 1000 RA Fireblade ABS 2017
- Honda CBR 1000 RA Fireblade ABS 2018
- Honda CBR 1000 RR Fireblade 2004
- Honda CBR 1000 RR Fireblade 2005
- Honda CBR 1000 RR Fireblade 2013
- Honda CBR 1000 RR Fireblade 2014
- Honda CBR 1000 RR Fireblade 2015
- Honda CBR 1000 RR Fireblade 2016
- Honda CBR 1000 RR S1 Fireblade SP-2 S1 ABS 2017
- Honda CBR 1000 RR S1 Fireblade SP-2 S1 ABS 2018
- Honda CBR 1000 RR Fireblade SP-2 S2 ABS 2017
- Honda CBR 1000 RR Fireblade SP-2 S2 ABS 2018
- Honda CBR 1000 RRS Fireblade Edition 2007
- Honda CBR 1000 S Fireblade SP 2014
- Honda CBR 1000 S Fireblade SP 2015
- Honda CBR 1000 S Fireblade SP 2016
- Honda CBR 1000 SA Fireblade SP ABS 2014
- Honda CBR 1000 SA Fireblade SP ABS 2015
- Honda CBR 1000 SA Fireblade SP ABS 2016
- Honda CBR 1000 RA Fireblade ABS 2019
- Honda CBR 1000 RR S1 Fireblade SP-2 S1 ABS 2019
- Honda CBR 1000 RR Fireblade SP-2 S2 ABS 2019
- Honda CBR 1000 RR Fireblade 2006
- Honda CBR 1000 RR Fireblade ABS 2013
- Honda CBR 1000 RR Fireblade ABS 2014
- Honda CBR 1000 RR Fireblade SP ABS 2014
- Honda CBR 1000 RR Fireblade ABS 2015
- Honda CBR 1000 RR Fireblade SP ABS 2015
- Honda CBR 1000 RR Fireblade ABS 2016
- Honda CBR 1000 RR Fireblade SP ABS 2016
- Honda CBR 1000 RR Fireblade ABS 2017
- Honda CBR 1000 RR Fireblade SP ABS 2017
- Honda CBR 1000 RR Fireblade ABS 2018
- Honda CBR 1000 RR Fireblade SP ABS 2018
- Honda CBR 1000 RR Fireblade ABS 2019
- Honda CBR 1000 RR Fireblade SP ABS 2019