Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Honda CBR 125 RT 2012
Manufacturer
Price
Sort
Options +3 
€13.78
Lowest price from 30 days before discount: €17.22
Fits on the frontEBC FA 375 brake pads (2 pcs.)
(5) 
from 5
Browse by manufacturer
Products reviews
I do not recommend this plug absolutely. The plug did not withstand the first tightening with a torque wrench much before reaching the proper tightening torque. I can't tell where the positive comments under this product come from, maybe with larger diameter plugs it is better. In my case, a simple oil change ended up with a whole day of disassembling and putting the motorcycle back together to remove the broken thread and the magnesium that fell inside the oil pan. The fit itself is not right either, the original plug has more than twice the thread length.
Review translated automatically
Reliable opinion
Honda NX 500 Dominator 1988 It fits perfectly. It is solid and when it came in contact with the wrench cap, it did not behave like plasticine unlike the old screw. I have already done 1500 kilometers. All in good order. An interesting option with a magnetic tip. I recommend.
Review translated automatically
Reliable opinion
Hello I own a Honda VTR1000 F 1997 I bought a mirror for a small amount of money which is durable, not like the Chinese crap that folds at higher speed and vibrates at slow speed. With a clear conscience I recommend Gmoto.pl store
Review translated automatically
Reliable opinion
1. bolt 12, which is a size 17? The threads fit, but. 2. it cracked while screwing leaving a piece of thread in the oil pan. 3. want to experience a heart attack during an oil change? Only 14.80!
Review translated automatically
Reliable opinion
The screw is professionally made, it holds until nice. It certainly does not drop a drop. The magnet attached to its end is so strong that I had a hard time detaching it from the tool cart. I recommend
Review translated automatically
Reliable opinion
The thread of the plug ok and basically that's it. Unfortunately, the magnet practically does not do its job. It's a waste of money for this particular plug.
Review translated automatically
Reliable opinion
I replaced the front brake pads on my Honda CBF 125 because they were worn out and the brakes were losing their effectiveness. First I lifted the front wheel and loosened the brake caliper. Then I pulled out the old pads, which were already badly worn. I cleaned the caliper, checked the condition of the disc and put on the new pads. Once they were seated properly, I screwed the caliper back on and squeezed the brake lever a few times to get the pads to seat properly. After a short test drive, I felt that the brakes were working perfectly again.
Review translated automatically
Reliable opinion
For my Hondas FT 500 (1983) & XBR 500 (1986) as spares. Remove the lever first, then punch out the old one from the contact pins side; it's an easy, light press fit. When pressing in the new one, align the hook on the switch with the notch in the clutch lever body. Note the hole in the switch also lines up with a hole at the underside of the alu body; it's for contact spray when needed. (Better use it before needed; once corroded the inner contact becomes difficult).
Review translated automatically
Reliable opinion
Affairs, it conducts electricity. However, it does not fit the 1976 GL1000 K1 model, as it has a larger diameter than the original (factory) and will not go into the hole in the handle holder. I had to take the original one apart despite the damage and was able to repair it. Perhaps this one will fit the specified GL1000 78-79 but I will check this when I give it to a colleague. It would be good to have the basic dimensions plotted on the parts in the photo to see if it will fit us.
Review translated automatically
Reliable opinion
Honda Dominator NX650 If you are asking yourself whether it makes sense to buy motorcycle accessories by mail order, then calculate the time spent in traffic jams to drive to the stores in search of selected items. My calculation indicates that for a few zlotys it's not worth it to run the car. On Gmoto I found everything I need. Both the price and delivery time are exemplary. I recommend.
Review translated automatically
Reliable opinion
Very good quality workmanship and high compatibility with the original Honda. The automatic fits perfectly to the unlisted matching model Honda CBZ 125F (1998) (who has it knows how hard it is to find any parts in catalogs for it). After installation, it fits without backlash, and the switch itself works smoothly and without jamming. Recommended.
Review translated automatically
Reliable opinion
I use exactly this magnetic oil drain screw in every Honda I have. The screw, despite exposure to harsh weather conditions, does not corrode, does not catch deposits and, most importantly, does not leak. The magnet actually catches metallic flecks and does not lose strength.
Review translated automatically
Reliable opinion
As for me this product is phenomenally made. The pads brake perfectly I am very happy with this purchase I feel more secure thanks to the fact that these pads do their job so well. Quality of workmanship at a high level.
Review translated automatically
Reliable opinion
Perfect received quickly the price is more than reasonable corresponds to the original part and fits very well in place of the old part and also works very well
Review translated automatically
Reliable opinion
Honda CBR 125 jc34 2006 In my opinion, considering the price of the product, there is nothing to complain about. Fitting 10/10 everything fits perfectly
Review translated automatically
Reliable opinion
Everything went great, price / performance is top! Fast shipping. High quality product, from OEM level. Always gladly again!
Review translated automatically
Reliable opinion