Motorcycle parts
Honda CG 125 - Page 4

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2020-09-26, 09:52

View original

Jacek

I have a 2003 Honda XR 125 L. I was replacing the clutch now for the second time, the discs worked fine, they really lasted with me for about 10,000km. Now I installed them for the second time and everything went without the slightest problem. (Psst. Make sure that for your motorcycle you don't need any specialized key in the motorcycle manual and check how many discs are needed for your motorcycle, in my honda - 5)

Review translated automatically

Reliable opinion

2020-09-26, 10:01

View original

Jacek

I have a 2003 Honda XR 125 L. I am replacing the clutch for the second time (after 10,000km) with hard off-road and city riding. Metal discs passed the test that's why I buy them for the second time. Installation without a problem, but remember the specialized keys for your motorcycle, and the clutch cover gasket.

Review translated automatically

Reliable opinion

2015-11-29, 19:14

View original

Wiktor

The chain tested at a distance of more than 9,000 kilometers performed flawlessly. Of course, during such a long test it was required to adjust the chain tension several times. However, it withstood more than 6000 kilometers with a load of 160 kilograms, which puts it on the highest podium in competition with other companies. Recommended. More about replacement equipment for long-distance travel at: http://125cmmieszanychuczuc.blogspot.com/.

Review translated automatically

Reliable opinion

2022-09-28, 18:40

View original

Stanisław

Honda NTV 650 Revere 97r. Kit well made, good quality parts, easy installation good fit. Replaces the original parts well, the pump works flawlessly. I would like to add that the kit was purchased on the recommendation of a Honda service employee because the original repair kit costs almost 4 times as much, and this one does its job 100%. I sincerely recommend.

Review translated automatically

Reliable opinion

2023-05-24, 21:04

View original

Dariusz

very good product,easy to install,app to download,connects to your phone via blue tooth and you have everything on the screen of your phone,like charging current,battery condition,monitoring its performance and so on,very useful thing,highly recommend in good conscience

Review translated automatically

Reliable opinion

2019-04-06, 09:30

View original

Krystian

I purchased this candle from you guys with the thought of the one I always dreamed of and this is how I got it it works great on my motorcycle I have a 1991 Suzuki GS 500 E. It fires up the first time since I bought it and yes it fired up after some second or third time, well I highly recommend products from this company :D

Review translated automatically

Reliable opinion

2017-04-28, 11:56

View original

Krzysztof

Honda CBR F4i 2003. The pins as fit the fairing assembly, quite wide but everywhere where you need to use them whole luckily they are invisible. They did not crack during installation so the quality is fine. Personally I can recommend because I am satisfied.

Review translated automatically

Reliable opinion

2020-10-06, 06:56

View original

Mateusz

The gasket of very good quality fits my model perfectly. part of the exhaust no longer comes out sideways so that the sound of the exhaust system work and the correctness of operation is very good. Thank you and recommend

Review translated automatically

Reliable opinion

2020-09-20, 14:21

View original

Rafał

Honda XL 125 Varadero year 2006. fairing mounting pin fits perfectly, made very solidly, made of strong plastic material. Matched very well to the original, virtually indistinguishable.

Review translated automatically

Reliable opinion

2018-11-23, 07:39

View original

Łukasz

The biggest minus for the shipping time. Zero information about the extension of the shipping time due to the lack of product ( one was for the other they waited for delivery)and I waited 5 days for the package by courier. Product ok.

Review translated automatically

Reliable opinion

2023-06-26, 06:07

View original

Przemek

Good quality workmanship there are no problems with clipping the only downside is that it is too long by 3-4 eyelets and on the rear sprocket 47z and front sprocket 15 z despite pulling all the way to the end it is very loose

Review translated automatically

Reliable opinion

2022-07-23, 13:57

View original

Wiktor

Honda Varadero 125 2007r (polift) The pin looks and fits the same literally dot to dot as the original. So I confidently recommend the more that the price is better than in ASO

Review translated automatically

Reliable opinion

2018-12-04, 08:49

View original

Grzegorz

For honda CBR 600 F4i sport fit perfectly, the studs, despite the rather high price, are really worth it, there is no play in the fairing joints, which was important for me. I recommend!

Review translated automatically

Reliable opinion

2019-07-07, 20:55

View original

Bartłomiej

Everything ok, the pin fits nicely and holds the fairing well, even after several times of removing the fairing and driving several thousand kilometers everything holds HONDA CBR F4 2000r.

Review translated automatically

Reliable opinion

2019-12-28, 20:49

View original

Norbas

Valve the same as the original which had probably enough. Fitted perfectly and works perfectly on the motorcycle, overall the store has bdb parts so I will be back!

Review translated automatically

Reliable opinion

2020-05-13, 06:44

View original

Damian

Honda VTX 1300 2006. The master cylinder was reconditioned with the kit purchased. Fast, efficient. High quality goods. The pump works like new.

Review translated automatically

Reliable opinion

2023-11-20, 06:43

View original

Robert

The brake shoes fit, but the holes for the springs are not in the same place as in the original Hondas, and they rub against the hub when the spring is inserted.

Review translated automatically

Reliable opinion

2020-11-17, 09:25

View original

Jacek

Yamaha FJR 1300, vintage 2009, the product does not differ in any way from the original or that purchased from the service. The price for it is dramatically different.

Review translated automatically

Reliable opinion

2017-04-04, 23:05

View original

Piotr

Honda transalp 600v,1995. Universal kit , well fitted , works flawlessly. Quality of materials at a high level. I recommend .

Review translated automatically

Reliable opinion

2020-05-12, 08:21

View original

Bartek

Honda Varadero 125 2001r fitting and installation seamless. The gasket does its job, no blowouts on the exhaust manifold.

Review translated automatically

Reliable opinion

2021-07-13, 10:54

View original

Petroniusz

Motorcycle Honda Goldwing 1800 2005 Purchased rubber fits perfectly as it is the original. Service efficient. Shipping fast. I recommend the store.

Review translated automatically

Reliable opinion

2018-10-15, 15:01

View original

MARCIN

I bought for my motorcycle K125 Chain lubricated pin included what more do you want Shipped by Post Office after 2 days I recommend

Review translated automatically

Reliable opinion

2024-05-02, 18:50

View original

Rafał

Recommended. Great quality. Perfect fit. No blowouts from the exhaust manifold and no more exhaust marks.

Review translated automatically

Reliable opinion

2018-09-19, 13:11

View original

Marcin

Honda XL 600R . A very good brand product that makes it easier to start a cold as well as warm engine. I recommend this product

Review translated automatically

Reliable opinion

2019-08-18, 08:25

View original

Marian

Brake shoes from the appearance very nice. I will be able to judge the quality during operation and after the service period.

Review translated automatically

Reliable opinion

2016-02-25, 14:28

View original

Daniel

WSK 125 The chain performs super, easy installation, super quality. I recommend to every wsk'i owner this product.

Review translated automatically

Reliable opinion

2016-02-25, 14:22

View original

Daniel

WSK 125 The chain performs super, easy installation, super quality. I recommend to every wsk'i owner this product.

Review translated automatically

Reliable opinion

2016-02-07, 10:30

View original

marek

valve seals to fit any head 50 cmm 4t very well seal the valves in the scooter,recommend.

Review translated automatically

Reliable opinion

2024-07-02, 17:40

View original

WIESŁAW

Very cool and fits my WSK 125 machine well, I think it's the best of the ones I've looked at

Review translated automatically

Reliable opinion

2019-04-08, 08:46

View original

Jacek

Motorcycle brand Honda XR 125 L, 2004 year of production. Installation of the gasket took place without any problems. Recommended.

Review translated automatically

Reliable opinion

2019-03-11, 22:21

View original

Zbigniew

The quality of the ordered goods first class. Large assortment, good prices but the waiting time is a bit far.

Review translated automatically

Reliable opinion

2018-05-03, 07:53

View original

Dariusz

I have used such candles before, I use these and they perform very much, I recommend for Honda forked engines

Review translated automatically

Reliable opinion

2018-04-13, 09:50

View original

Kamil

Chain quality very good. Well lubricated . Fits the gear ratios I used in my wsk.

Review translated automatically

Reliable opinion

2022-06-08, 11:00

View original

Grzegorz

Very nice pegs you can see that they are not made of just anything so I put them on without any problem they look like the original ones

Review translated automatically

Reliable opinion

2021-10-24, 10:09

View original

Jarek

By far the best candles are iridium candles. Well worth the investment. Noticeable difference in engine performance

Review translated automatically

Reliable opinion

2023-06-16, 16:23

View original

Kacper

Fits Romet Zetka 50 The chain needs to be shortened slightly to be within the initial adjustment range.

Review translated automatically

Reliable opinion

2021-07-18, 10:28

View original

ZBIGNIEW

Everything fits, good value for money. The manufacturing quality of the product is good. Highly recommend.

Review translated automatically

Reliable opinion

2021-07-18, 10:28

View original

ZBIGNIEW

Everything fits, good value for money. The manufacturing quality of the product is good. Highly recommend.

Review translated automatically

Reliable opinion

2020-07-10, 10:43

View original

Krzysztof

WSK 125, I recommend, very good value for money. Fit and workmanship without reservation.

Review translated automatically

Reliable opinion