Motorcycle parts
Honda CM 250 T Custom 1981

2020-02-25, 22:28

View original

Johan

Used for Honda FT 500 1983. Fitted within the hour (after disassembly & preparation = removal of old bearings). Have used 50 mm pvc pipe to drive bottom cup in; tightness of fit was as it should be. Did not use the supplied washer but made my own of 30x36x3 mm so the original rubber seal could sit below the (inner part of) the bearing. Re-used the original bottom washer (0.8 mm thick) to shield the seal. The (upper) adjustment nut also carries a thin shield. I had to grind the spigot (for the shield, on the nut) to a chamfer, as it just touched the radius of the upper bearing inner ring. On the 3rd picture, where the shield lies under the nut: red arrows = grind inner dia of spigot, shield fits at outer dia (on top as depicted). Ordered a 2nd set for my Honda XBR 500.

Review translated automatically

Reliable opinion

2018-08-20, 12:28

View original

Jakub

Honda CX 500 Custom version from 1983. B-type gas cable - pushing, the fit is perfect. The thread screwed into the rollgas fits like the original, the length of the cable is perfect, it works smoothly and lightly. Installation is trouble-free as well as its adjustment. Workmanship is solid and accurate.

Review translated automatically

Reliable opinion

2016-02-02, 17:27

View original

Marcin

The shipment arrived remarkably quickly, Contact excellent, they answered my question without undue delay. Parts of very good quality, in general, only positives. In an era of online stores that treat customers more like intruders than as employers a great positive. Keep it up; )

Review translated automatically

Reliable opinion

2016-02-02, 17:27

View original

Marcin

The shipment arrived remarkably quickly, Contact excellent, they answered my question without undue delay. Parts of very good quality, in general, only positives. In an era of online stores that treat customers more like intruders than as employers a great positive. Keep it up; )

Review translated automatically

Reliable opinion

2025-09-16, 08:57

View original

Fermín

I chose this brand for being the best known and very good results for the bike. I put them on a classic SUZUKI GSX 600 F from 1989. The bike once put on, starts at the first time and without giving the starter sometimes, time will confirm if they are of very good quality.

Review translated automatically

Reliable opinion

2025-07-29, 08:36

View original

Félix

Quality spark plugs that mounted upon arrival and the operation is perfect. The shipment has been fast and secure, I live in Spain and I have before the expected delivery time. It is the second time I buy and I will continue to do so because it gives me guarantee the purchase.

Review translated automatically

Reliable opinion

2023-06-28, 15:29

View original

Bartłomiej

The outer diameter of the gasket is about 1-2mm too large for the 2010 Honda CBF600, after gently spreading the outer muffle of the muffler went in by force (it is soft) and somehow got there after tightening the cybant, but the installation is troublesome.

Review translated automatically

Reliable opinion

2024-10-10, 15:35

View original

Ernst

Everything in perfect order, price / performance is absolutely okay! I can't give any details regarding function as the bike is still being assembled!!!

Review translated automatically

Reliable opinion

2024-09-21, 05:09

View original

Juha Sakari Rongas

Excellent product as well as delivery service response, I appreciate as well as thank you. More of the same level of service is needed. I will continue to use your services.

Review translated automatically

Reliable opinion

2021-03-06, 13:00

View original

Adam

Standard product of good quality easy way to flood with eloctrolite, factory charged. After installation and momentary recharging, it works without any problems.

Review translated automatically

Reliable opinion

2016-06-10, 12:02

View original

Michał

Honda CB250N - 83'. The filter fits perfectly, the quality is as good as it gets - it's cool that you can get parts for such old motorcycles on hand.

Review translated automatically

Reliable opinion

2018-04-17, 09:21

View original

Kamil

Kawasaki GPZ 500S. The plugs perform excellently, at both high and low speeds. Very easy to install and, above all, durable.

Review translated automatically

Reliable opinion

2023-07-23, 12:08

View original

Kamil

Oil filter of very good quality, practically no different from the original, easy to install. Honda drives, does not whine ;)

Review translated automatically

Reliable opinion

2024-09-19, 11:50

View original

favre

Oil filter identical to the original. Quality conforms to original, now in use for over a month, everything ok.

Review translated automatically

Reliable opinion

2021-02-16, 11:24

View original

Błażej

Gasket ordered for Honda GL500 Interstate '82, good workmanship, fits perfectly - well fitted by the store for this model.

Review translated automatically

Reliable opinion

2025-05-03, 06:48

View original

BEDIER

As advertised, fast delivery. Very good quality candles, good price Perfect I recommend

Review translated automatically

Reliable opinion

2021-02-27, 19:25

View original

Wiesława

The product fulfills its function, the quality is very good, the parameters as ordered, adapted to the device.

Review translated automatically

Reliable opinion

2020-04-11, 14:38

View original

Paweł

Everything is great. This is the kind of online shopping I like the most. Goods first class and fast shipping. I recommend

Review translated automatically

Reliable opinion

2024-09-20, 08:04

View original

Kenneth

Good spark plugs at a good price. Shipping was fast and the goods arrived as planned and on time

Review translated automatically

Reliable opinion

2017-02-28, 21:23

View original

Radosław

Honda CB 400 N year 1985, fits nicely nothing leaks :)

Review translated automatically

Reliable opinion

2025-07-27, 03:03

View original

seignier

good product, ideal for our old bikes.

Review translated automatically

Reliable opinion