Motorcycle parts
Honda CR 250 R 2002 - Page 20

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2018-11-01, 20:28

View original

Krzysztof

Honda Africa XRV 750 - 1999. I bought 12 pieces. This mounting rubber is found in several places on the motorcycle(the mount of the skull rack, oil cooler, plastic handles, etc.). It looks like the original, the rubber is flexible, you can bend it with two fingers with a stronger squeeze and it looks solid. Only the course of time can verify whether it is as solid. Dimensions: Hole diameter(nominal): 10mm Width of the entire rubber: 22mm Groove depth: 8mm

Review translated automatically

Reliable opinion

2025-08-26, 23:56

View original

Βασίλης

Excellent quality product. Exactly as I expected. I have it for painting my own paint in a garage. Generally highly recommend gmotoshop for camera accessory purchases Also you can type in your model and its year and it will tell you which products are compatible and which are not. Very good job

Review translated automatically

Reliable opinion

2022-02-22, 18:06

View original

Grzegorz

I always suggest first of all products close to the original when buying parts. In my case, I changed the original 92r NGK ignition pipe for a new one also NGK additionally in red color, it brought freshness to the appearance of the machine and will certainly work trouble-free for a long time.

Review translated automatically

Reliable opinion

2025-10-06, 08:46

View original

Jørn

Super fine spark plug that could start this old YZ 250 Yamaha vintage 92, which has been renovated in engine, painted frame and new plastic kit and seat ? !

Review translated automatically

Reliable opinion

2024-10-09, 13:17

View original

Wiktor

It sits in my neos as well as simson and I can not say a bad word about it. If it wasn't good I wouldn't buy it a second time. I recommend

Review translated automatically

Reliable opinion

2020-12-25, 00:18

View original

Marcin

The product met my expectations, the workmanship is very good with no imperfections. The price is adequate to the quality, it is better to buy one for 15 than 3 for 5 Chinese, which will fall apart after 150 km of driving. Water resistance is, proved it to me last weather when I drove into a decent puddle at 50 km/h Hurricane did not even hesitate. Assembly slightly falls out to warm up on a radiator, because such a cold rubber from the courier to fit is a nightmare.

Review translated automatically

Reliable opinion

2021-09-13, 22:50

View original

Patryk

For Romet Zetta 50 fits like a glove - it looks identical to the Chinese original. The rubber cover on the side of the high-voltage cable, admittedly, is hard to enter the cable, but this is an advantage in my opinion - it reduces the risk of moisture getting inside. After installation, the difference is unbelievable, the spark on the spark plug has improved, it is strong, and there is no phenomenon of "falling ignition". I recommend!

Review translated automatically

Reliable opinion

2020-11-25, 10:03

View original

Łukasz

I ride a Honda CR 250, immediately after unpacking the cables you could see the high quality of workmanship, the design is also cosseting, the kit even included instructions on how to bleed the brakes, which surprised me. The difference with the original old hoses and the new ones from Hel is an abyss when it comes to the strength and precision of braking, in other words, a product worth recommending.

Review translated automatically

Reliable opinion

2020-05-22, 14:11

View original

Wojciech

Suzuki SV 1000 k7, if you choose candles are the iridium ones from NGK the best, I recommend only NGK company. I recommend getting a 16 wrench, because the plugs on which I rode were on a wrench for plugs located in the tool kit located in the motorcycle, and those of the order have a nut to screw in a 16 key. such curiosity

Review translated automatically

Reliable opinion

2020-05-03, 00:23

View original

Maciej

Wsk 125 The frame is nice, you can't expect more from a plastic metallized one. It fits my wsk-i nicely. The only big minus is that it did not fit completely in the holes - I had to widen the holes with a drill both at the top and bottom. Other than that, installation was easy. I recommend the product for those who don't mind making up holes.

Review translated automatically

Reliable opinion

2020-05-31, 09:42

View original

Miklós

A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*

Review translated automatically

Reliable opinion

2021-05-08, 07:38

View original

Andrzej

Plastic license plate frame looks like a good chrome material I changed the plate because I became the owner of a Suzuki Intruder VL 125 2000 year all in all. Looks super material fine that's why the price very low ugly comes longer.

Review translated automatically

Reliable opinion

2020-06-07, 11:07

View original

Piotr

Good day, I own a Suzuki RM 125 and from the beginning I had problems with candles. Recommended cheaper replacements did not cope. Only replacing the candle with an iridium one solved the problem. Finally I stopped having problems with firing up, I recommend 100%!

Review translated automatically

Reliable opinion

2017-11-05, 23:09

View original

Dawid

My 2 wheels are Ktm exc 300 1998 year. I ordered 2 pieces of these plugs because previously I also had them purchased from Gmoto and I was satisfied now put on a new one because the mileage juz naked to change the old one everything fits perfectly. I recommend

Review translated automatically

Reliable opinion

2024-07-30, 14:11

View original

Jakub

I previously owned a regular spark plug and bought an iridium one, the difference is colossal, the engine does not start, it is more sensitive to the accelerator, better acceleration, I recommend the product, it is worth paying extra for this spark plug.

Review translated automatically

Reliable opinion

2024-09-20, 06:30

View original

Alexandros

Good morning, I was looking everywhere for this particular replacement, but I only found it in this store. I am very happy with the quality of the product in relation to the price. It's worth it and more.

Review translated automatically

Reliable opinion

2014-09-11, 21:30

View original

Jerzy

I have been shopping with this seller for a long time and each time I am very satisfied with the quality, speed and contact with the seller. I have already recommended several offers to my friends, who are also very satisfied.

Review translated automatically

Reliable opinion

2019-06-17, 07:58

View original

Damian

In the category of quality/price very nice frame. Strong plastic imitating chrome. Aesthetics at a high level. Lightweight and durable And the license plate enters on contact ( for me a plus because there is no slack). I recommend

Review translated automatically

Reliable opinion

2016-01-12, 20:17

View original

Rafał

Romet Ogar 205, year of production 1987.NGK is NGK, quality in itself, I changed and the firing problem disappeared. Pipe precisely made, matches the rest of the ignition system components.

Review translated automatically

Reliable opinion

2024-09-10, 06:27

View original

Kuba

I have a ktm exc 200, I purchased this NGK BR8EG racing plug for it, the plug fits perfectly. The motorcycle cranks correctly and holds the revs, I am very satisfied with it. I recommend

Review translated automatically

Reliable opinion

2019-12-27, 13:32

View original

Mariusz

Honda Shadow VT 600 1994. The kit includes all the gaskets that need to be replaced when reconditioning the brake caliper, plus grease for the piston. Everything fit as in the original.

Review translated automatically

Reliable opinion

2020-02-03, 14:49

View original

Patryk

Suzuki katana ay 50 (2006) The fit of the pipe is very good, the plug is designed for a candle without a cap, sealed ends prevent water from getting inside.

Review translated automatically

Reliable opinion

2019-08-12, 08:36

View original

Michał

I have a 2018 Yamahe Yz 250. I use NGK BR8EG (racing) spark plug for it - Japanese motorcycle - spark plug manufactured in Japan - with each other it plays well! RECOMMEND!

Review translated automatically

Reliable opinion

2023-09-11, 20:14

View original

sara

This mounting rubber is a great replacement for the rubbers found on the Honda CBR 600, but they are slightly smaller than the original (I personally didn't mind the installation)

Review translated automatically

Reliable opinion

2017-09-04, 10:25

View original

Mariusz

frame very nice, put on jawa ts 350 looks very good on this motorcycle, installation also very pleasant immediately changes the name of the motorcycle adds better charm

Review translated automatically

Reliable opinion

2024-09-25, 05:27

View original

Filip

Very good solution for those who want to replace the license plate frame with a new one. The price is very affordable. The quality of workmanship is also flawless. I can recommend

Review translated automatically

Reliable opinion

2024-05-02, 17:02

View original

xxx

I am really satisfied with the purchased bolt. It is well made and meets my expectations, it is a good choice, I will definitely order something again and more than once.

Review translated automatically

Reliable opinion

2025-05-27, 21:39

View original

Alejandro

It is already on and tested. I would say that the bike even sounds better. I am delighted. I thought it was excessive and now I see it as essential. Very good purchase.

Review translated automatically

Reliable opinion

2018-07-06, 13:55

View original

Karol

Cool brand NGK. Fits perfectly in place of the factory one, gives a good spark. Thanks to the 2 protectors do not get moisture in the wires and candle. I recommend !

Review translated automatically

Reliable opinion

2025-03-26, 08:05

View original

Troels

Bought new spark plugs from gmoto. Everything just plays, super professional and lightning fast delivery. Only buy spare parts from gmoto. They get my highest recommendation

Review translated automatically

Reliable opinion

2019-07-03, 21:51

View original

Krzysztof

Quality at a high level. Included are sealing rubbers so that water does not get under the spark plugs or between the high-voltage wire and the pipe.

Review translated automatically

Reliable opinion

2020-04-28, 10:56

View original

Marcin

The spark plug works very well in a 125 2t cross on it the motorcycle keeps the revs very well (had problems with it before) I recommend :)))

Review translated automatically

Reliable opinion

2017-04-16, 21:04

View original

Grzegorz

Shl m11 1961. Nothing to add, nothing to take away, the pipe sits like this and the extra protective rubbers should protect well against water and possible punctures.

Review translated automatically

Reliable opinion

2025-04-13, 11:27

View original

NIKOS

Excellent product. It fit properly in the caliper and I no longer have any leakage from the wear and tear of the previous one. Tourmax quality comparable to the factory ones.

Review translated automatically

Reliable opinion

2016-07-31, 17:56

View original

Dariusz

I bought 2 pipes for a Romet Pony and a Chinese Moto Ventus scooter for both of them, I also bought NGK plugs and the startup of the motos improved immediately

Review translated automatically

Reliable opinion

2023-05-31, 06:57

View original

Sylwester

I highly recommend these iridium plugs it is very durable and the motorcycle thanks to it has more power and collects better I recommend this plug for your 2T.

Review translated automatically

Reliable opinion

2019-08-10, 14:00

View original

Wojciech

Yamaha tdr 125 2000. The plug works very well, it has a much better service life and the bike fires better when cold but the performance has not changed.

Review translated automatically

Reliable opinion

2017-07-23, 09:59

View original

Michał

It fits the ETZ 250 very well. It is made of rather good material, the plug sits firmly - there is no possibility of 'popping out'. I recommend.

Review translated automatically

Reliable opinion

2025-09-18, 10:04

View original

ΔΗΜΗΤΡΗΣ

It has nickel finish but its plastic, the article says metallic but thats wrong, if you want it for enduro bike or adv its not metallic

Review translated automatically

Reliable opinion