Motorcycle parts
Honda GL 1500 Goldwing

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2020-06-22, 13:07

View original

Stanisław

The whole kit fits perfectly. I recommend to regenerate the baked clutch. Previously it was impossible to move it, now it goes in with fingers without any problems.

Review translated automatically

Reliable opinion

2020-03-30, 20:41

View original

Michał

Sealers without complaint. In a rigid and secure package a set of sealers and covers for two leaguers. Assembly trivially easy (for those who like and have an idea of DIY and small repairs). The fit is perfect. So far zero problem and the lags work perfectly in combination with Motul 10W oil.

Review translated automatically

Reliable opinion

2020-07-08, 19:23

View original

Waldemar

My machine is an 86 Honda Shadow VT 1100 . Purchased parts were not dedicated for this vintage , so as a novice user I bought blind and surprisingly they fit . Installation was no problem and the material and workmanship flawless . G Moto and product on pistket . LWG .

Review translated automatically

Reliable opinion

2017-05-15, 22:44

View original

Maciej

Patient Honda CB600F Hornet, vintage 2001, non-functioning fan switch. What can I say, a top-notch product. After replacement, the fan spins and works at its best. This radiator fan switch is a great product, I would recommend it to anyone

Review translated automatically

Reliable opinion

2019-04-14, 18:38

View original

Mariusz

KIT purchased and installed on a 1996 Honda VFR 750.Everything fit, it worked, I am satisfied. I will mention that I met with very friendly service. And I guess this is the main reason that I will be shopping there. No photo because the parts are already installed.

Review translated automatically

Reliable opinion

2019-04-09, 08:40

View original

Rafał

I purchased the bearings with seals a few days ago for my Honda cbr 1000 f sc 21 motorcycle. The parts came to me in no time. At the moment they are waiting for installation because I have to wait until the wheel returns from painting

Review translated automatically

Reliable opinion

2020-03-30, 20:44

View original

Michał

The protections, compared to the old ones, are slightly wider, more rigid and more "expandable", which makes them fit perfectly into the groove in the lade blocking the sealers.

Review translated automatically

Reliable opinion

2019-01-19, 16:40

View original

Krzysztof

Honda Transalp xl650 2001 year. The installation of the gaskets went smoothly, good fit , good workmanship and material quality . After installation the carburetor works like new.

Review translated automatically

Reliable opinion

2020-08-08, 13:12

View original

Rajmund

The motorcycle is a honda transalp 600 1996r.The element fit perfectly without any reservations thanks to good workmanship and fit the repair went quickly and efficiently.Regards

Review translated automatically

Reliable opinion

2024-06-02, 12:20

View original

Łukasz

Quality of service at a very high level, contact, advice and help with fast delivery, revelation. Goods purchased as described and very well packed.

Review translated automatically

Reliable opinion

2020-03-15, 20:37

View original

Sławomir

Honda Transalp XL V600. The pistons arrived armor-packed. The store assured that they would fit and of course they did, brakes like new. I sincerely recommend.

Review translated automatically

Reliable opinion

2024-05-03, 07:48

View original

Bogusław

Great sealers, they fit nice and tight even though the lag was polished, so far only about 100km after replacement but no drop on the lag, I recommend

Review translated automatically

Reliable opinion

2019-08-26, 12:15

View original

Sławomir

I own a Honda NT650V Deauville. The seals seem solid because of the 2 spring rings. The previous ones only had one such ring.

Review translated automatically

Reliable opinion

2021-08-13, 09:01

View original

Krzysztof

It works 100% pity only that the kit does not include a copper washer. To seal the connection. Other than that, the product is of good quality. I really recommend

Review translated automatically

Reliable opinion

2023-05-24, 07:13

View original

Remi

Sealers well made, there was no problem with the installation which indicates well-behaved parameters. Tight, oil no longer leaks.

Review translated automatically

Reliable opinion

2020-02-11, 17:50

View original

Piotr

Sealers very good quality not some cheap plastic. There are 2 springs on each sealer. Fast shipping. Recommended.

Review translated automatically

Reliable opinion

2024-09-02, 15:06

View original

Dawid

Very good product, nicely packaged and quality also at a high level, everything fit without any problem, so the CBR F2 is already laughing :d

Review translated automatically

Reliable opinion

2023-07-29, 07:17

View original

Sika

Product of good quality as always fast shipping art.I installed in Honda CB 750 Steven fifty degree of difficulty of installation 2/5 I recommend

Review translated automatically

Reliable opinion

2024-06-22, 08:03

View original

Rafał

The seals fit suzuki gsx600f. Finally stopped leaking from the suspension and its operation improved significantly. I recommend

Review translated automatically

Reliable opinion

2024-06-18, 19:10

View original

Michał

Gaskets like gaskets :) They fit and seal well. No unnecessary lint. They fit a 1984 Honda Sabre 750.

Review translated automatically

Reliable opinion

2024-09-11, 14:40

View original

Marcin

Very good quality workmanship fit perfectly to the lags 2 sets mounted on Moto and miles fly nothing leaks.

Review translated automatically

Reliable opinion

2021-04-09, 17:18

View original

Piotr

Recommended. 100% satisfaction. Full compatibility. Fast delivery, seamless transaction. Thank you and best regards.

Review translated automatically

Reliable opinion

2020-04-05, 11:54

View original

Tomasz

Honda nt650v deauville 1999. The set of shock seals fit perfectly, the installation was done without any problems.

Review translated automatically

Reliable opinion

2023-11-20, 08:32

View original

Michał

The gaskets fit the Honda GL 1000 motorcycle perfectly, good contact. Evaluation of the transaction quickly and professionally.

Review translated automatically

Reliable opinion

2023-05-19, 05:35

View original

Jeremiasz

Very nice workmanship with good strong material fits the caliper perfectly works well on KTM SX 125

Review translated automatically

Reliable opinion

2022-08-02, 22:26

View original

Andrzej

I own a motorcycle brand: Honda CB 500F 2013 material was well packed, fit and complete.

Review translated automatically

Reliable opinion

2024-05-02, 15:54

View original

Adrian

Product of very good quality, fit very good, fit the motorcycle for which it was recommended.

Review translated automatically

Reliable opinion

2022-04-09, 10:24

View original

Irek

Product of very good quality, meets my expectations. No need to buy more expensive sealers.

Review translated automatically

Reliable opinion

2019-04-15, 10:08

View original

Szymon

Honda NTV650 1993. I recommend, good quality product and fast shipping (faster than expected). Greetings

Review translated automatically

Reliable opinion

2024-06-08, 22:37

View original

Kacper

Everything fits as expected, good quality product, there was no problem with the fit and installation.

Review translated automatically

Reliable opinion

2024-05-14, 05:12

View original

Mariusz

Low quality, product well matched to the motorcycle but still the dimensions did not fit could not be used.

Review translated automatically

Reliable opinion

2022-05-29, 20:11

View original

Jacek

Honda Varadero 125, a part worth recommending, fits, workmanship good, everything works as expected.

Review translated automatically

Reliable opinion

2020-04-04, 10:09

View original

Ziemowit

CBR F3 600 fits, everything great! Hoods well shaped, rubber bdb quality. I sincerely recommend!

Review translated automatically

Reliable opinion

2019-03-19, 14:00

View original

Kacper

The gasket fits. Very good product. Why overpay for the original in the service. In a box of 2 pieces.

Review translated automatically

Reliable opinion

2022-05-29, 20:10

View original

Jacek

Honda Varadero 125, parts fit, everything works as expected after installation, quality of goods good.

Review translated automatically

Reliable opinion

2020-03-24, 08:02

View original

Mateusz

Goods in accordance with the photos well packaged, fast delivery, seller certainly recommendable.

Review translated automatically

Reliable opinion

2022-08-02, 22:28

View original

Andrzej

I own a 2013 Honda CB 500F motorcycle. the sealer fit, it was well packaged.

Review translated automatically

Reliable opinion

2016-10-07, 18:13

View original

Mariusz

EVERYTHING OK.GOODS AS DESCRIBED.FAST SHIPPING.RECOMMEND.

Review translated automatically

Reliable opinion

2016-05-08, 07:34

View original

Rafał

HONDA FES 250 FORESIGHT 2003

Review translated automatically

Reliable opinion