Motorcycle parts
Honda NSR 250 R 1992 - Page 2

2020-06-13, 10:45

View original

tomasz

Hello! Some time ago I bought NGK BR9ECMIX spark plug and I would like to share my opinion with you. It is really great! I immediately noticed an improvement in the performance of my motorcycle: a little more power, lower combustion. I have already ridden 10 motoring hours on it and see no problems. It works the same as it did at the beginning, i.e. the motorcycle burns from a kick cold or warm, I have no problems with firing up. The improvement is huge compared to my old plug, where I had numerous problems with, for example, firing. It kept flooding the plug, so I decided to get an NGK iridium plug and all the problems disappeared. I can confidently recommend this product to anyone. Simply a revelation! Greetings

Review translated automatically

Reliable opinion

2017-07-15, 09:23

View original

Dawid

2000 Honda CBR 600F. The regulator works as expected + good price. I had previously tested a custom-made regulator, purchased at reg_mot.republika.pl, and unfortunately found that it drew current at a standstill, and was quite a bit larger than the standard regulator and required rearranging the components under the fairing. Tour-max regulator is the same size as the original, works perfectly. I am satisfied, I recommend it!

Review translated automatically

Reliable opinion

2023-06-14, 02:35

View original

Mariusz

Installation: perfect fit to the frame holes (Honda CBR 600F4) Operation: charging at idle 13.4-13.7 V, maximum charging voltage 14.4-14.6 V (holds until cut-off, measured with a meter) The price is quite exorbitant, although the parameters reflect what it should be. Cheaper Chinese ones I'm afraid of, while here there is more confidence in the quality of the product.

Review translated automatically

Reliable opinion

2020-03-30, 20:41

View original

Michał

Sealers without complaint. In a rigid and secure package a set of sealers and covers for two leaguers. Assembly trivially easy (for those who like and have an idea of DIY and small repairs). The fit is perfect. So far zero problem and the lags work perfectly in combination with Motul 10W oil.

Review translated automatically

Reliable opinion

2023-05-24, 21:04

View original

Dariusz

very good product,easy to install,app to download,connects to your phone via blue tooth and you have everything on the screen of your phone,like charging current,battery condition,monitoring its performance and so on,very useful thing,highly recommend in good conscience

Review translated automatically

Reliable opinion

2020-07-08, 19:23

View original

Waldemar

My machine is an 86 Honda Shadow VT 1100 . Purchased parts were not dedicated for this vintage , so as a novice user I bought blind and surprisingly they fit . Installation was no problem and the material and workmanship flawless . G Moto and product on pistket . LWG .

Review translated automatically

Reliable opinion

2021-08-08, 10:10

View original

Klaudiusz

Honda CBR 1100XX Super Blackbird from 1997, the replacement went without a problem, the bearings and seals fit. After replacement, you can feel a big improvement and much lighter handling. The old bearings were worn and jumped into the "point" when straightening the steering wheel, now there is no such thing.

Review translated automatically

Reliable opinion

2017-11-17, 07:02

View original

Jakub

We fitted the bearings to a 2004 Honda Hornet pc36. The installation went smoothly and the bearings seem indestructible ;) Well, but this is Mc International after all, the top shelf among parts for Japanese ;)

Review translated automatically

Reliable opinion

2019-04-22, 09:59

View original

Daniel

With chains you need to be careful not to come across a fake - a lot of them, for example, on allegro. Stores such as gmoto ensure that the part is original, so it is even worth overpaying.

Review translated automatically

Reliable opinion

2020-03-30, 20:44

View original

Michał

The protections, compared to the old ones, are slightly wider, more rigid and more "expandable", which makes them fit perfectly into the groove in the lade blocking the sealers.

Review translated automatically

Reliable opinion

2024-05-03, 07:48

View original

Bogusław

Great sealers, they fit nice and tight even though the lag was polished, so far only about 100km after replacement but no drop on the lag, I recommend

Review translated automatically

Reliable opinion

2024-09-20, 08:49

View original

Mateusz

I had previously put on a regular candle the motor had Firing problems after purchasing an iridium candle it started to run nicer and fire up most of all

Review translated automatically

Reliable opinion

2019-08-26, 12:15

View original

Sławomir

I own a Honda NT650V Deauville. The seals seem solid because of the 2 spring rings. The previous ones only had one such ring.

Review translated automatically

Reliable opinion

2021-08-13, 09:01

View original

Krzysztof

It works 100% pity only that the kit does not include a copper washer. To seal the connection. Other than that, the product is of good quality. I really recommend

Review translated automatically

Reliable opinion

2020-04-11, 08:48

View original

Bartosz

Yamaha TZR 125 4FL. Candle well packaged, electrode break was already set correctly. The motorcycle runs without problems, I recommend

Review translated automatically

Reliable opinion

2023-05-24, 07:13

View original

Remi

Sealers well made, there was no problem with the installation which indicates well-behaved parameters. Tight, oil no longer leaks.

Review translated automatically

Reliable opinion

2020-02-11, 17:50

View original

Piotr

Sealers very good quality not some cheap plastic. There are 2 springs on each sealer. Fast shipping. Recommended.

Review translated automatically

Reliable opinion

2023-07-29, 07:17

View original

Sika

Product of good quality as always fast shipping art.I installed in Honda CB 750 Steven fifty degree of difficulty of installation 2/5 I recommend

Review translated automatically

Reliable opinion

2024-06-22, 08:03

View original

Rafał

The seals fit suzuki gsx600f. Finally stopped leaking from the suspension and its operation improved significantly. I recommend

Review translated automatically

Reliable opinion

2024-09-11, 14:40

View original

Marcin

Very good quality workmanship fit perfectly to the lags 2 sets mounted on Moto and miles fly nothing leaks.

Review translated automatically

Reliable opinion

2020-08-11, 09:36

View original

Michał

100% compatible with the original, on a plug and play basis, identical dimensions, plug socket. Works flawlessly.

Review translated automatically

Reliable opinion

2020-04-05, 11:54

View original

Tomasz

Honda nt650v deauville 1999. The set of shock seals fit perfectly, the installation was done without any problems.

Review translated automatically

Reliable opinion

2022-08-02, 22:26

View original

Andrzej

I own a motorcycle brand: Honda CB 500F 2013 material was well packed, fit and complete.

Review translated automatically

Reliable opinion

2024-05-02, 15:54

View original

Adrian

Product of very good quality, fit very good, fit the motorcycle for which it was recommended.

Review translated automatically

Reliable opinion

2022-04-09, 10:24

View original

Irek

Product of very good quality, meets my expectations. No need to buy more expensive sealers.

Review translated automatically

Reliable opinion

2021-11-03, 20:26

View original

Tomasz

Hello, I own a 2008 Kawasaki VN 900 Classic. The hoods fit perfectly. I am satisfied. I recommend.

Review translated automatically

Reliable opinion

2021-10-02, 18:15

View original

Artur

I am satisfied with my purchase I bought the product for my Honda CBR F3 everything fits and works I recommend.

Review translated automatically

Reliable opinion

2024-08-18, 19:59

View original

Krzysztof

The chain came well packaged and lubricated, no problems with the fit and does not stretch.

Review translated automatically

Reliable opinion

2024-06-09, 09:15

View original

Piotr

Everything ok the shipment came quickly everything fits. The motorcycle is already riding on the new part. I recommend.

Review translated automatically

Reliable opinion

2020-04-04, 10:09

View original

Ziemowit

CBR F3 600 fits, everything great! Hoods well shaped, rubber bdb quality. I sincerely recommend!

Review translated automatically

Reliable opinion

2022-08-02, 22:28

View original

Andrzej

I own a 2013 Honda CB 500F motorcycle. the sealer fit, it was well packaged.

Review translated automatically

Reliable opinion

2017-03-12, 19:26

View original

Filip

BDB workmanship quality for this price. I recommend

Review translated automatically

Reliable opinion

2016-05-08, 07:34

View original

Rafał

HONDA FES 250 FORESIGHT 2003

Review translated automatically

Reliable opinion