Motorcycle parts
Honda ST 1300 Pan European CBS 2005 - Page 3

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2020-11-22, 22:44

View original

Piotr

Filter installed on a 2004 Varadero 1000. Filter in a cardboard box additionally protected by a film. Filter gasket moistened with some agent to prevent damage during screwing.

Review translated automatically

Reliable opinion

2019-05-17, 14:01

View original

Przemysław

Honda ST 1300 2002 rubbers fit very good material, they look nice, not everyone remembers that due to worn out rubbers the grip of shoes to the footrests is low which makes it easy to have an accident, safety first and foremost and if by the way the machine gains in appearance it is even better ;)

Review translated automatically

Reliable opinion

2022-02-07, 10:42

View original

KONRAD

Hello, I bought this kit to stock to keep on the shelf for my Benelli TNT 1130 Gaskets very good company Athena I know and recommend. GMOTO SERVICES ALSO RECOMMEND always professional and without lime well packed and on time recommends and regards

Review translated automatically

Reliable opinion

2016-04-21, 20:49

View original

Julita

Honda Deauville, year 2008, poj.700.Workmanship solid, well-fitted, no problems with installation, meet expectations. We will see how long they will serve :-).It was worth buying, but a piece of rubber should not cost so much ;-).

Review translated automatically

Reliable opinion

2019-05-17, 13:59

View original

Przemysław

Honda st 1300 2002 , the motorcycle has its years at the time of purchase of the machine and the first inspection it turned out that the pins are "worn out" new ones I could not find anywhere , of course on Gmoto there was no problem with the availability ;)

Review translated automatically

Reliable opinion

2021-02-15, 09:25

View original

Wiktor

Very good quality product. Easy installation, durable material. Everything is of the highest level. I am not a writer to write fairy tales in the opinion of 100 characters, so I invite you to buy. I heartily recommend.

Review translated automatically

Reliable opinion

2017-11-17, 07:02

View original

Jakub

We fitted the bearings to a 2004 Honda Hornet pc36. The installation went smoothly and the bearings seem indestructible ;) Well, but this is Mc International after all, the top shelf among parts for Japanese ;)

Review translated automatically

Reliable opinion

2020-06-29, 18:59

View original

Szymon

The sensor looks like I got a damaged or defective one from the factory. After screwing the nut in, the thread simply broke. I had to screw in the old sensor. I am waiting for a solution to the issue. The rest of the products ok.

Review translated automatically

Reliable opinion

2020-02-02, 11:46

View original

Bartosz

Triumph Street Triple 765 I have been using HIFLOFILTRO filters for years. In the standard version they do their job perfectly. You can the racing version, but for daily riding there is no need for it.

Review translated automatically

Reliable opinion

2024-04-13, 07:28

View original

Mariusz

Filters oil, flows on. No problems with pressure or leaking. It looks good on the CBR 600 F4i - by the color you just can't even see it between the exhaust manifolds ;)

Review translated automatically

Reliable opinion

2017-04-28, 11:52

View original

Krzysztof

Honda CBR F4i 2003. The pins made correctly but if you have a motorcycle like me, they are only suitable from what I noticed for the battery case, the fairing already falls off .

Review translated automatically

Reliable opinion

2021-02-13, 13:15

View original

Krzysztof

I own a 2015 Honda Goldwing 1800, the oils as well as any products I purchase are always first quality. I recommend to everyone. Installation without any problems.

Review translated automatically

Reliable opinion

2023-06-09, 19:22

View original

Marek

HIFLOFILTRO filter is a very good solution for any motorcycle. And straightforwardly perfect. I used in each of my motorcycle at each mileage. I heartily recommend.

Review translated automatically

Reliable opinion

2021-12-15, 09:59

View original

Tomasz

Yamaha XT600 E 3TB 1991 | Sensor well made. On XT/TT 600 models For proper operation, this sensor should be mounted on silicone without a copper gasket.

Review translated automatically

Reliable opinion

2019-04-27, 15:09

View original

Tomasz

Honda Vfr 750 rc 24 from 1987. The fit of the parts is very good making it a pleasure to assemble the exhaust system. It met my expectations as much as possible.

Review translated automatically

Reliable opinion

2020-08-21, 06:39

View original

Michał

The description does not match the goods I received. The package marked with a sticker (chrome filter) but in the package was a regular black filter.

Review translated automatically

Reliable opinion

2019-07-05, 22:18

View original

Dawid

Honda Cbr 1100 xx vintage 2005 I recommend this store. Everything without the slightest problem. The package came quickly. Well packaged.

Review translated automatically

Reliable opinion

2024-05-21, 20:40

View original

Mariusz

The sealer seems to be of good quality, I think it will serve well. It fits perfectly soon I will check it in the course of work.

Review translated automatically

Reliable opinion

2018-01-14, 09:58

View original

Maciej

everything great.consistent with the order,on time and in good quality.this is another purchase from my side that I am satisfied with.

Review translated automatically

Reliable opinion

2021-12-21, 10:23

View original

Jacek

Honda CBf 600,2010r.The gaskets fit, whether they will work is what I will know after driving a season, they look quite solid.

Review translated automatically

Reliable opinion

2022-05-02, 11:20

View original

Mirosław

Honda SW t400 year 2010 very good filter, very good workmanship, fits my Honda It met my expectations

Review translated automatically

Reliable opinion

2020-01-24, 08:51

View original

Tomasz

Recommended product very easy to install oring included without any problems recommend to all interested parties

Review translated automatically

Reliable opinion

2022-01-30, 08:29

View original

Andrzej

Honda CBF600 PC43 - has been using for years, quality is sufficient with annual oil change interval and quiet driving.

Review translated automatically

Reliable opinion

2024-02-01, 10:55

View original

Iwona

Compatible and compared with the original, fits perfectly and holds well the parts to which the attachment was made.

Review translated automatically

Reliable opinion

2021-04-05, 10:14

View original

Krzysztof

Honda ST 1300 year 2004 Product made very well. The replacement went without a problem. Rating very good.

Review translated automatically

Reliable opinion

2024-05-03, 21:34

View original

Waldi

The filter meets the specifications; I have been using these filters for many years - they unscrew easily without a filter wrench.

Review translated automatically

Reliable opinion

2024-09-26, 13:40

View original

TOMASZ

The product is worthy of recommendation. Meets the expectations of the user. Quick and trouble-free installation. Fits VTX1300

Review translated automatically

Reliable opinion

2024-03-06, 10:07

View original

Robert

High quality product meets my expectations fits my Honda Hornet 600 perfectly everything ok recommend

Review translated automatically

Reliable opinion

2019-03-09, 07:32

View original

Andrzej

KAWASAKI VN 2000 CLASSIC year 2007, KAWASAKI VN 2000 CLASSIC year 2007, KAWASAKI VN 2000 CLASSIC year 2007

Review translated automatically

Reliable opinion

2016-03-07, 19:08

View original

Sylwester

Honda CBF 600n 2009 It may not be top of the line, but it is good and much cheaper than a branded one from the showroom

Review translated automatically

Reliable opinion

2016-03-07, 19:08

View original

Sylwester

Honda CBF 600n 2009 It may not be top of the line, but it is good and much cheaper than a branded one from the showroom

Review translated automatically

Reliable opinion

2024-11-05, 06:47

View original

Patryk

Product very good, great quality workmanship, fits perfectly no problems to put on I recommend :)

Review translated automatically

Reliable opinion

2020-11-22, 15:11

View original

Jacek

Yamaha XVS 1300 CU year 2014 The filter fits without any problem. Good protection of the gasket with additional film.

Review translated automatically

Reliable opinion

2021-01-16, 20:29

View original

Dariusz

Super recommend to everyone fast delivery, fast implementation everything as it should be super.

Review translated automatically

Reliable opinion

2021-09-30, 09:45

View original

Marek

Yamaha FZS 600 Fazer 2000 year. Product as described, top quality. I recommend❗.

Review translated automatically

Reliable opinion

2016-05-26, 19:42

View original

Jacek

yamaha virago xv750 good price, and quality, recommend the store

Review translated automatically

Reliable opinion

2015-03-08, 17:37

View original

sasin

HifloFiltro HF204 Kawasaki oil filter

Review translated automatically

Reliable opinion