Motorcycle parts
Honda VF 750 - Page 14

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2018-05-30, 16:49

View original

Krzysiek

I have a replica honda magna 2003 year 125ccm I was looking for rectifiers on the internet for a long time and finally found them here fast shipping I fired it up the first time good quality product solid I recommend it

Review translated automatically

Reliable opinion

2019-01-12, 09:03

View original

Andrzej

Honda Cbf 500 2007. Sealers very good quality . Hassle-free installation. You can see at a glance that it is an original product of Athena.Oil burning I have already.I recommend.

Review translated automatically

Reliable opinion

2020-04-20, 11:27

View original

Adrian

Hi Honda Cbr 250r 2011 year The seals fit perfectly . Workmanship is very good , they look really decent despite the fact that they cost half as much as the competition. When applying to the shaft also no problems and damage (which often happens with poor quality product). After mounting they perform their function very well. I recommend and greetings

Review translated automatically

Reliable opinion

2022-09-28, 18:40

View original

Stanisław

Honda NTV 650 Revere 97r. Kit well made, good quality parts, easy installation good fit. Replaces the original parts well, the pump works flawlessly. I would like to add that the kit was purchased on the recommendation of a Honda service employee because the original repair kit costs almost 4 times as much, and this one does its job 100%. I sincerely recommend.

Review translated automatically

Reliable opinion

2020-03-30, 20:41

View original

Michał

Sealers without complaint. In a rigid and secure package a set of sealers and covers for two leaguers. Assembly trivially easy (for those who like and have an idea of DIY and small repairs). The fit is perfect. So far zero problem and the lags work perfectly in combination with Motul 10W oil.

Review translated automatically

Reliable opinion

2020-07-08, 19:23

View original

Waldemar

My machine is an 86 Honda Shadow VT 1100 . Purchased parts were not dedicated for this vintage , so as a novice user I bought blind and surprisingly they fit . Installation was no problem and the material and workmanship flawless . G Moto and product on pistket . LWG .

Review translated automatically

Reliable opinion

2017-07-11, 09:59

View original

Mariusz

I am a happy owner of a yamaha yzf 125r in which I recently noticed oil loss , I replaced the valve seals which I ordered from gmoto and I am very satisfied , solidly made . Easy to install and fit to my 2010r modelj recommend to everyone.

Review translated automatically

Reliable opinion

2017-07-11, 09:59

View original

Mariusz

I am a happy owner of a yamaha yzf 125r in which I recently noticed oil loss , I replaced the valve seals which I ordered from gmoto and I am very satisfied , solidly made . Easy to install and fit to my 2010r model I recommend to everyone.

Review translated automatically

Reliable opinion

2019-04-14, 18:38

View original

Mariusz

KIT purchased and installed on a 1996 Honda VFR 750.Everything fit, it worked, I am satisfied. I will mention that I met with very friendly service. And I guess this is the main reason that I will be shopping there. No photo because the parts are already installed.

Review translated automatically

Reliable opinion

2024-07-28, 09:32

View original

Marek

Starter clutch repair kit used for 1983 Honda GL1100 motorcycle.All parts are true to the original, perfectly matched. After replacement, the motorcycle fires up like new from the showroom!!! Very good quality and conformity to the original.

Review translated automatically

Reliable opinion

2017-11-17, 07:02

View original

Jakub

We fitted the bearings to a 2004 Honda Hornet pc36. The installation went smoothly and the bearings seem indestructible ;) Well, but this is Mc International after all, the top shelf among parts for Japanese ;)

Review translated automatically

Reliable opinion

2021-06-03, 15:15

View original

Sławomir

I own a 2005 Honda CBF600. The sensor fit without a problem, plug and play. The replacement took 5 minutes. Fulfillment of the order was lightning fast, the product was with me the next day. Highly recommend.

Review translated automatically

Reliable opinion

2017-10-13, 18:24

View original

Wojciech

honda vf 500 magna,goods in line with my expectations, seals fit perfectly, no residual rubber, etc as happens with other zimer, plus for the solid plastic packaging

Review translated automatically

Reliable opinion

2019-12-27, 13:32

View original

Mariusz

Honda Shadow VT 600 1994. The kit includes all the gaskets that need to be replaced when reconditioning the brake caliper, plus grease for the piston. Everything fit as in the original.

Review translated automatically

Reliable opinion

2018-06-04, 17:29

View original

Marek

Hello I own a 1984 Honda CBX 650 Nighthawk I bought front suspension seals very good price and quality product installation went without any problem I recommend.

Review translated automatically

Reliable opinion

2020-03-30, 20:44

View original

Michał

The protections, compared to the old ones, are slightly wider, more rigid and more "expandable", which makes them fit perfectly into the groove in the lade blocking the sealers.

Review translated automatically

Reliable opinion

2019-01-19, 16:40

View original

Krzysztof

Honda Transalp xl650 2001 year. The installation of the gaskets went smoothly, good fit , good workmanship and material quality . After installation the carburetor works like new.

Review translated automatically

Reliable opinion

2020-05-13, 06:44

View original

Damian

Honda VTX 1300 2006. The master cylinder was reconditioned with the kit purchased. Fast, efficient. High quality goods. The pump works like new.

Review translated automatically

Reliable opinion

2024-05-03, 07:48

View original

Bogusław

Great sealers, they fit nice and tight even though the lag was polished, so far only about 100km after replacement but no drop on the lag, I recommend

Review translated automatically

Reliable opinion

2019-08-26, 12:15

View original

Sławomir

I own a Honda NT650V Deauville. The seals seem solid because of the 2 spring rings. The previous ones only had one such ring.

Review translated automatically

Reliable opinion

2020-02-19, 18:44

View original

Dariusz

Sealers made of very good material are also very tight and flexible which makes it easy to install when replacing old sealers . I recommend

Review translated automatically

Reliable opinion

2017-06-18, 21:11

View original

Konrad

As great a plus as possible. The product in full working order, I recommend it as much as possible. I looked in many stores and here I found the cheapest. Price/quality 10/10.

Review translated automatically

Reliable opinion

2023-05-24, 07:13

View original

Remi

Sealers well made, there was no problem with the installation which indicates well-behaved parameters. Tight, oil no longer leaks.

Review translated automatically

Reliable opinion

2020-02-11, 17:50

View original

Piotr

Sealers very good quality not some cheap plastic. There are 2 springs on each sealer. Fast shipping. Recommended.

Review translated automatically

Reliable opinion

2021-02-03, 22:45

View original

Michał

Cross Honda CR80r from 2000 year gaskets perfectly do their job, visually as well as material product very good quality.

Review translated automatically

Reliable opinion

2017-04-04, 23:05

View original

Piotr

Honda transalp 600v,1995. Universal kit , well fitted , works flawlessly. Quality of materials at a high level. I recommend .

Review translated automatically

Reliable opinion

2024-09-02, 15:06

View original

Dawid

Very good product, nicely packaged and quality also at a high level, everything fit without any problem, so the CBR F2 is already laughing :d

Review translated automatically

Reliable opinion

2024-05-13, 11:07

View original

maciej

Maybe I was unlucky, but not very accurate fit of the oring and diaphragm even though I did not choose the cheapest. I wish I had taken a picture.

Review translated automatically

Reliable opinion

2023-07-29, 07:17

View original

Sika

Product of good quality as always fast shipping art.I installed in Honda CB 750 Steven fifty degree of difficulty of installation 2/5 I recommend

Review translated automatically

Reliable opinion

2020-10-26, 17:04

View original

Mariusz

Honda Shadow 1100 ACE 1996, Front brake repair kit identical to the original, when assembled everything fits perfectly.

Review translated automatically

Reliable opinion

2024-06-22, 08:03

View original

Rafał

The seals fit suzuki gsx600f. Finally stopped leaking from the suspension and its operation improved significantly. I recommend

Review translated automatically

Reliable opinion

2024-06-18, 19:10

View original

Michał

Gaskets like gaskets :) They fit and seal well. No unnecessary lint. They fit a 1984 Honda Sabre 750.

Review translated automatically

Reliable opinion

2024-09-11, 14:40

View original

Marcin

Very good quality workmanship fit perfectly to the lags 2 sets mounted on Moto and miles fly nothing leaks.

Review translated automatically

Reliable opinion

2022-07-26, 09:01

View original

Romuald

Sealers of super quality, fit 100%. Highly recommend. Installed and the lags already dry. and the motorcycle is in working order :)

Review translated automatically

Reliable opinion

2017-06-04, 18:47

View original

Radosław

Kawasaki ER 5 1996 year, the valve as factory, performs its function. You can see that it is of very good quality. I recommend

Review translated automatically

Reliable opinion

2020-04-05, 11:54

View original

Tomasz

Honda nt650v deauville 1999. The set of shock seals fit perfectly, the installation was done without any problems.

Review translated automatically

Reliable opinion

2017-06-24, 14:58

View original

Adrian

KAWASAKI ER 5 2001 They fit and look solid made, mounting them were very simple with good material

Review translated automatically

Reliable opinion

2023-07-04, 20:40

View original

Tomasz

Super service I got what I ordered in a very short time. Wish all companies were so honest. Greetings

Review translated automatically

Reliable opinion

2022-08-02, 22:26

View original

Andrzej

I own a motorcycle brand: Honda CB 500F 2013 material was well packed, fit and complete.

Review translated automatically

Reliable opinion