Motorcycle parts
Honda VFR 800 A ABS 2003 - Page 6

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2019-01-12, 09:03

View original

Andrzej

Honda Cbf 500 2007. Sealers very good quality . Hassle-free installation. You can see at a glance that it is an original product of Athena.Oil burning I have already.I recommend.

Review translated automatically

Reliable opinion

2022-02-05, 19:26

View original

Roman

Honda VFR 800 FI 1998. Parts very good quality l, fit perfectly. The jerking problems are gone.

Review translated automatically

Reliable opinion

2021-06-22, 08:54

View original

Sylwek

The filter of a very decent brand. I buy it all the time and have never been disappointed. A very big plus is that it can be unscrewed with a socket wrench. If someone has little space, as I do, to do anything at the filter then such a head on the filter is salvation. It is a little more expensive than the standard version but worth every penny. Last time I had a regular filter I had to perforate it and pour oil in the exhaust pipes to unscrew it , in this case the replacement was clean, fast and above all simple! I recommend

Review translated automatically

Reliable opinion

2023-05-24, 21:04

View original

Dariusz

very good product,easy to install,app to download,connects to your phone via blue tooth and you have everything on the screen of your phone,like charging current,battery condition,monitoring its performance and so on,very useful thing,highly recommend in good conscience

Review translated automatically

Reliable opinion

2017-07-11, 09:59

View original

Mariusz

I am a happy owner of a yamaha yzf 125r in which I recently noticed oil loss , I replaced the valve seals which I ordered from gmoto and I am very satisfied , solidly made . Easy to install and fit to my 2010r model I recommend to everyone.

Review translated automatically

Reliable opinion

2017-07-11, 09:59

View original

Mariusz

I am a happy owner of a yamaha yzf 125r in which I recently noticed oil loss , I replaced the valve seals which I ordered from gmoto and I am very satisfied , solidly made . Easy to install and fit to my 2010r modelj recommend to everyone.

Review translated automatically

Reliable opinion

2021-08-08, 10:10

View original

Klaudiusz

Honda CBR 1100XX Super Blackbird from 1997, the replacement went without a problem, the bearings and seals fit. After replacement, you can feel a big improvement and much lighter handling. The old bearings were worn and jumped into the "point" when straightening the steering wheel, now there is no such thing.

Review translated automatically

Reliable opinion

2017-05-15, 22:44

View original

Maciej

Patient Honda CB600F Hornet, vintage 2001, non-functioning fan switch. What can I say, a top-notch product. After replacement, the fan spins and works at its best. This radiator fan switch is a great product, I would recommend it to anyone

Review translated automatically

Reliable opinion

2021-11-07, 09:56

View original

Marek

Honda Hornet cb600fa pc41, the filter fits well, does not leak, quick and efficient replacement, the end of the filter can also be useful, because it is adapted for the key that is, it will be easier to unscrew at the next replacement. Overall I am satisfied.

Review translated automatically

Reliable opinion

2024-05-05, 17:43

View original

Wiesław

Filter as described hassle-free installation and a big plus for the ability to tighten with a wrench without using special wrenches for filters. Painting without cavities, and it looks aesthetically pleasing. Plus for the protective film on the filter inlet.

Review translated automatically

Reliable opinion

2019-05-17, 13:59

View original

Przemysław

Honda st 1300 2002 , the motorcycle has its years at the time of purchase of the machine and the first inspection it turned out that the pins are "worn out" new ones I could not find anywhere , of course on Gmoto there was no problem with the availability ;)

Review translated automatically

Reliable opinion

2020-10-06, 06:56

View original

Mateusz

The gasket of very good quality fits my model perfectly. part of the exhaust no longer comes out sideways so that the sound of the exhaust system work and the correctness of operation is very good. Thank you and recommend

Review translated automatically

Reliable opinion

2017-11-17, 07:02

View original

Jakub

We fitted the bearings to a 2004 Honda Hornet pc36. The installation went smoothly and the bearings seem indestructible ;) Well, but this is Mc International after all, the top shelf among parts for Japanese ;)

Review translated automatically

Reliable opinion

2018-11-23, 07:39

View original

Łukasz

The biggest minus for the shipping time. Zero information about the extension of the shipping time due to the lack of product ( one was for the other they waited for delivery)and I waited 5 days for the package by courier. Product ok.

Review translated automatically

Reliable opinion

2017-04-28, 11:52

View original

Krzysztof

Honda CBR F4i 2003. The pins made correctly but if you have a motorcycle like me, they are only suitable from what I noticed for the battery case, the fairing already falls off .

Review translated automatically

Reliable opinion

2020-03-30, 20:44

View original

Michał

The protections, compared to the old ones, are slightly wider, more rigid and more "expandable", which makes them fit perfectly into the groove in the lade blocking the sealers.

Review translated automatically

Reliable opinion

2020-05-25, 08:45

View original

Jacek

Honda cbr 1100 xx, bearings for the wheel work great. Quality and fit ok. protection from water and dirt is much better than in the previously worn. I recommend.

Review translated automatically

Reliable opinion

2020-04-20, 09:38

View original

Adrian

Honda CB600 F Hornet, thanks to the possibility of using a ring wrench, the replacement went remarkably fast , it is worth paying a few zlotys extra for this convenience

Review translated automatically

Reliable opinion

2016-05-27, 06:41

View original

Andrzej

-Kawasaki Vulcan EN 500A 1991. -after installation, the tightness of the exhaust system improved -It was definitely worth to buy the above mentioned product.

Review translated automatically

Reliable opinion

2020-05-12, 08:21

View original

Bartek

Honda Varadero 125 2001r fitting and installation seamless. The gasket does its job, no blowouts on the exhaust manifold.

Review translated automatically

Reliable opinion

2020-03-31, 10:10

View original

Krzysztof

The product shipped on time, b.well protected, everything efficiently, quickly and reliably , as described. I highly recommend, Krzysiek

Review translated automatically

Reliable opinion

2024-06-15, 13:21

View original

Serhii

Unfortunately but for Transalp xl600 96r.p. - does not fit. It must be 37x45x25. But the quality is good, for other models must fit.

Review translated automatically

Reliable opinion

2020-03-27, 07:47

View original

Mirosław

Honda Shadow VT600 1994. The rubber is not yet attached but, it should fit. the workmanship of these is of a high standard.

Review translated automatically

Reliable opinion

2024-05-02, 18:50

View original

Rafał

Recommended. Great quality. Perfect fit. No blowouts from the exhaust manifold and no more exhaust marks.

Review translated automatically

Reliable opinion

2024-01-22, 17:20

View original

Andrzej

Well matched to Nissin brake discs, work well with them, show long service life. Recommended.

Review translated automatically

Reliable opinion

2022-05-02, 11:20

View original

Mirosław

Honda SW t400 year 2010 very good filter, very good workmanship, fits my Honda It met my expectations

Review translated automatically

Reliable opinion

2020-06-30, 12:31

View original

Marcin

honda varadero xl100v all Balls gaskets super quality and easy to replace. i think the top shelf product

Review translated automatically

Reliable opinion

2023-09-03, 10:00

View original

Irek

I finally found a product that fits my century old motorcycle perfectly. It paired perfectly with my machine.

Review translated automatically

Reliable opinion

2019-04-20, 12:46

View original

Gabriel

Very good quality and workmanship the fit is also ok as I the very way of putting on the valves is quite simple

Review translated automatically

Reliable opinion

2021-04-05, 10:10

View original

Krzysztof

Honda ST 1300 year 2004 Product very well made replacement went without a problem. Rating very good.

Review translated automatically

Reliable opinion

2024-05-03, 08:20

View original

Krzysztof

It fits and works, and thanks to its special design, it makes replacement much easier. All you need is an ordinary socket wrench.

Review translated automatically

Reliable opinion

2020-03-24, 08:02

View original

Mateusz

Goods in accordance with the photos well packaged, fast delivery, seller certainly recommendable.

Review translated automatically

Reliable opinion

2022-08-02, 22:28

View original

Andrzej

I own a 2013 Honda CB 500F motorcycle. the sealer fit, it was well packaged.

Review translated automatically

Reliable opinion

2016-02-11, 09:02

View original

Marcin

Honda NSR 125R 2002. High quality rubber not different from the original.

Review translated automatically

Reliable opinion

2016-10-07, 18:13

View original

Mariusz

EVERYTHING OK.GOODS AS DESCRIBED.FAST SHIPPING.RECOMMEND.

Review translated automatically

Reliable opinion

2016-06-20, 11:44

View original

Piotr

Honda NT650V Bearings worthy of consideration

Review translated automatically

Reliable opinion

2016-05-08, 07:34

View original

Rafał

HONDA FES 250 FORESIGHT 2003

Review translated automatically

Reliable opinion