Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Honda VT 1100 C2 Shadow ACE 1999
Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.
Review translated automatically
Reliable opinion
Honda Africa Twin XRV 750 1999. The piston fits the calipers on older models, the pistons for my motorcycle are 3mm shorter. I ordered the set with the idea of shortening it. The material turned out to be soft compared to the original(this does not prove its strength, therefore the rating of 3 from the quality), cutting 3mm on the lathe did not overheat the pad and after protecting it on the turning side with an appropriate specific will ensure that it will not lose its anti-corrosion properties. A perfect replacement for the twice more expensive original. The width agrees, the quality of the seals seems to be OK, after installation it does its job - I recommend.
Review translated automatically
Reliable opinion
Honda Africa XRV 750 - 1999. I bought 12 pieces. This mounting rubber is found in several places on the motorcycle(the mount of the skull rack, oil cooler, plastic handles, etc.). It looks like the original, the rubber is flexible, you can bend it with two fingers with a stronger squeeze and it looks solid. Only the course of time can verify whether it is as solid. Dimensions: Hole diameter(nominal): 10mm Width of the entire rubber: 22mm Groove depth: 8mm
Review translated automatically
Reliable opinion
I have a replica honda magna 2003 year 125ccm I was looking for rectifiers on the internet for a long time and finally found them here fast shipping I fired it up the first time good quality product solid I recommend it
Review translated automatically
Reliable opinion
Used for a complete rebuild of my caliper, the piston is the same as the original. I recommend
Review translated automatically
Reliable opinion
The delivery was within the agreed deadline. The products arrived as pictured. Quality seems good.
Review translated automatically
Reliable opinion
Sealers without complaint. In a rigid and secure package a set of sealers and covers for two leaguers. Assembly trivially easy (for those who like and have an idea of DIY and small repairs). The fit is perfect. So far zero problem and the lags work perfectly in combination with Motul 10W oil.
Review translated automatically
Reliable opinion
My machine is an 86 Honda Shadow VT 1100 . Purchased parts were not dedicated for this vintage , so as a novice user I bought blind and surprisingly they fit . Installation was no problem and the material and workmanship flawless . G Moto and product on pistket . LWG .
Review translated automatically
Reliable opinion
Patient Honda CB600F Hornet, vintage 2001, non-functioning fan switch. What can I say, a top-notch product. After replacement, the fan spins and works at its best. This radiator fan switch is a great product, I would recommend it to anyone
Review translated automatically
Reliable opinion
The product fit perfectly, I am extremely satisfied. The option from the website to specify the bike model and it tells you which product is suitable is great. The delivery was fast, they kept me informed all the time about the movement of the product.I recommend !
Review translated automatically
Reliable opinion
Good morning, I was looking everywhere for this particular replacement, but I only found it in this store. I am very happy with the quality of the product in relation to the price. It's worth it and more.
Review translated automatically
Reliable opinion
Good morning, I was looking everywhere for this particular replacement, but I only found it in this store. I am very happy with the quality of the product in relation to the price. It's worth it and more.
Review translated automatically
Reliable opinion
Good morning, I was looking everywhere for this particular replacement, but I only found it in this store. I am very happy with the quality of the product in relation to the price. It's worth it and more.
Review translated automatically
Reliable opinion
It works correctly and was very easy to install. My bike is a 2006 CBF600N and I had no problems at all, it only takes a socket wrench and needle nose pliers to remove and attach the connecting cable.
Review translated automatically
Reliable opinion
We fitted the bearings to a 2004 Honda Hornet pc36. The installation went smoothly and the bearings seem indestructible ;) Well, but this is Mc International after all, the top shelf among parts for Japanese ;)
Review translated automatically
Reliable opinion
The part is of very good quality, comparable to the original, everything fits as it should, works flawlessly, you can confidently drive a few seasons without looking, doing an average of up to 10,000 km per season
Review translated automatically
Reliable opinion
I own a 2005 Honda CBF600. The sensor fit without a problem, plug and play. The replacement took 5 minutes. Fulfillment of the order was lightning fast, the product was with me the next day. Highly recommend.
Review translated automatically
Reliable opinion
Honda Shadow VT 600 1994. The kit includes all the gaskets that need to be replaced when reconditioning the brake caliper, plus grease for the piston. Everything fit as in the original.
Review translated automatically
Reliable opinion
The above set of seals for front forks Honda Deauville NT 700 V, r.v. 2008 absolutely fine, trouble-free assembly, the product suits the type of moto, appears to be of good quality.
Review translated automatically
Reliable opinion
VARADERO XL 1000 SD01 99r. Very good quality fuel pump repair kit. The installation went without any problems. Very good fit of the parts. I recommend the manufacturer and seller.
Review translated automatically
Reliable opinion
The protections, compared to the old ones, are slightly wider, more rigid and more "expandable", which makes them fit perfectly into the groove in the lade blocking the sealers.
Review translated automatically
Reliable opinion
Same as the original, but 75% cheaper. Quick response to e-mails. Although with a little more delay in delivery with respect to what was said on the page.
Review translated automatically
Reliable opinion
This mounting rubber is a great replacement for the rubbers found on the Honda CBR 600, but they are slightly smaller than the original (I personally didn't mind the installation)
Review translated automatically
Reliable opinion
The motorcycle is a Honda Transalp XL 600 The piston holds the dimension perfectly in every plane. The only difference is the different shape of the bottom of the piston, but this does not seem to affect the operation.
Review translated automatically
Reliable opinion
Honda Transalp xl650 2001 year. The installation of the gaskets went smoothly, good fit , good workmanship and material quality . After installation the carburetor works like new.
Review translated automatically
Reliable opinion
Bought to replace the original honda bearings, very good quality, fitted just right for the Hornet, very good price. Fast shipping, I recommend.
Review translated automatically
Reliable opinion
Great sealers, they fit nice and tight even though the lag was polished, so far only about 100km after replacement but no drop on the lag, I recommend
Review translated automatically
Reliable opinion
Excellent product. It fit properly in the caliper and I no longer have any leakage from the wear and tear of the previous one. Tourmax quality comparable to the factory ones.
Review translated automatically
Reliable opinion
I own a Honda NT650V Deauville. The seals seem solid because of the 2 spring rings. The previous ones only had one such ring.
Review translated automatically
Reliable opinion
As great a plus as possible. The product in full working order, I recommend it as much as possible. I looked in many stores and here I found the cheapest. Price/quality 10/10.
Review translated automatically
Reliable opinion
Parts corresponding to the original start at a slightly lower temperature 85/90 degrees original start at 100 degrees aesthetics equal to the original
Review translated automatically
Reliable opinion
On CBF 500A applied correctly to the radiator and it works just like the factory switch. It also seals as it should and there are no leaks.
Review translated automatically
Reliable opinion
It works 100% pity only that the kit does not include a copper washer. To seal the connection. Other than that, the product is of good quality. I really recommend
Review translated automatically
Reliable opinion
I am satisfied everything efficiently and according to what I ordered. The ordered goods meet my expectations. I positively evaluate this store.
Review translated automatically
Reliable opinion
Sealers well made, there was no problem with the installation which indicates well-behaved parameters. Tight, oil no longer leaks.
Review translated automatically
Reliable opinion
Sealers very good quality not some cheap plastic. There are 2 springs on each sealer. Fast shipping. Recommended.
Review translated automatically
Reliable opinion
Fit perfectly which I also expected. Would definitely recommend others to order. Relatively fast shipping, but ok
Review translated automatically
Reliable opinion
Fast service. Good place to shop and at a really good price. They ship fast. It's not the last time I shop there.
Review translated automatically
Reliable opinion
Product of good quality as always fast shipping art.I installed in Honda CB 750 Steven fifty degree of difficulty of installation 2/5 I recommend
Review translated automatically
Reliable opinion
Good product delivered quickly. I searched for a while to avoid spending so much and found what I was looking for at GMOTO. That's how it should be.
Review translated automatically
Reliable opinion
Other models of
- Honda VT 1100 C3 Shadow Aero 1999
- Honda VT 1100 C3 Shadow Aero 1998
- Honda VT 1100 C3 Shadow Aero 1998
- Honda VT 1100 C Shadow 1989
- Honda VT 1100 C2 Shadow ACE 2000
- Honda VT 1100 C3 Shadow Aero 2000
- Honda VT 1100 C3 Shadow Aero 2000
- Honda VT 1100 C3 Shadow Aero 2000
- Honda VT 1100 C Shadow 1988
- Honda VT 1100 C Shadow 1994
- Honda VT 1100 C Shadow 1995
- Honda VT 1100 C2 Shadow ACE 1995
- Honda VT 1100 C2 Shadow ACE 1995
- Honda VT 1100 C2 Shadow ACE 1996
- Honda VT 1100 C2 Shadow ACE 1996
- Honda VT 1100 C2 Shadow ACE 1997
- Honda VT 1100 C2 Shadow ACE 1997
- Honda VT 1100 C2 Shadow ACE 1997
- Honda VT 1100 C2 Shadow ACE 1998
- Honda VT 1100 C3 Shadow Aero 1998
- Honda VT 1100 C3 Shadow Aero 1998
- Honda VT 1100 C3 Shadow Aero 1999
- Honda VT 1100 C3 Shadow Aero 1999