Forgot password
Order status
Free delivery from 150 euro
Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.
Review translated automatically
Reliable opinion
Honda Africa XRV 750 - 1999. I bought 12 pieces. This mounting rubber is found in several places on the motorcycle(the mount of the skull rack, oil cooler, plastic handles, etc.). It looks like the original, the rubber is flexible, you can bend it with two fingers with a stronger squeeze and it looks solid. Only the course of time can verify whether it is as solid. Dimensions: Hole diameter(nominal): 10mm Width of the entire rubber: 22mm Groove depth: 8mm
Review translated automatically
Reliable opinion
Honda NTV 650 Revere 97r. Kit well made, good quality parts, easy installation good fit. Replaces the original parts well, the pump works flawlessly. I would like to add that the kit was purchased on the recommendation of a Honda service employee because the original repair kit costs almost 4 times as much, and this one does its job 100%. I sincerely recommend.
Review translated automatically
Reliable opinion
Bmw R 1100 RT 2000 year, I purchased a set of consumables. Very friendly, professional service and advice. Competitive prices. They respond to emails. You are kept informed about the shipping status. This was my 3rd contact with the company. I recommend, I will certainly use again more than once. Regards, Tycjan
Review translated automatically
Reliable opinion
Patient Honda CB600F Hornet, vintage 2001, non-functioning fan switch. What can I say, a top-notch product. After replacement, the fan spins and works at its best. This radiator fan switch is a great product, I would recommend it to anyone
Review translated automatically
Reliable opinion
Honda CBR F4i 2003. The pins as fit the fairing assembly, quite wide but everywhere where you need to use them whole luckily they are invisible. They did not crack during installation so the quality is fine. Personally I can recommend because I am satisfied.
Review translated automatically
Reliable opinion
Honda XL125 Varadero. After replacement, the play in the suspension of the rocker arm was erased and the comfort of the ride increased. The part fit very well and very good quality. The store works accurately, very good contact, good prices-I recommend.
Review translated automatically
Reliable opinion
Honda XL 125 Varadero year 2006. fairing mounting pin fits perfectly, made very solidly, made of strong plastic material. Matched very well to the original, virtually indistinguishable.
Review translated automatically
Reliable opinion
The sensor looks like I got a damaged or defective one from the factory. After screwing the nut in, the thread simply broke. I had to screw in the old sensor. I am waiting for a solution to the issue. The rest of the products ok.
Review translated automatically
Reliable opinion
This mounting rubber is a great replacement for the rubbers found on the Honda CBR 600, but they are slightly smaller than the original (I personally didn't mind the installation)
Review translated automatically
Reliable opinion
Honda Varadero 125 2007r (polift) The pin looks and fits the same literally dot to dot as the original. So I confidently recommend the more that the price is better than in ASO
Review translated automatically
Reliable opinion
For honda CBR 600 F4i sport fit perfectly, the studs, despite the rather high price, are really worth it, there is no play in the fairing joints, which was important for me. I recommend!
Review translated automatically
Reliable opinion
Regulator worth the price, one of the best companies that makes reliable components for motorcycles. I am very satisfied. I will feel safe on the road
Review translated automatically
Reliable opinion
Yamaha XT600 E 3TB 1991 | Sensor well made. On XT/TT 600 models For proper operation, this sensor should be mounted on silicone without a copper gasket.
Review translated automatically
Reliable opinion
Everything ok, the pin fits nicely and holds the fairing well, even after several times of removing the fairing and driving several thousand kilometers everything holds HONDA CBR F4 2000r.
Review translated automatically
Reliable opinion
The motorcycle is a honda transalp 600 1996r.The element fit perfectly without any reservations thanks to good workmanship and fit the repair went quickly and efficiently.Regards
Review translated automatically
Reliable opinion
Valve the same as the original which had probably enough. Fitted perfectly and works perfectly on the motorcycle, overall the store has bdb parts so I will be back!
Review translated automatically
Reliable opinion
Honda VTX 1300 2006. The master cylinder was reconditioned with the kit purchased. Fast, efficient. High quality goods. The pump works like new.
Review translated automatically
Reliable opinion
Sealers fit varadero 125 2002, workmanship ok, trouble-free installation. So far the suspension works ok, we'll see how long they last.
Review translated automatically
Reliable opinion
Yamaha FJR 1300, vintage 2009, the product does not differ in any way from the original or that purchased from the service. The price for it is dramatically different.
Review translated automatically
Reliable opinion
Goods very well packaged and protected in a clear box, you can see what you are buying made solidly and with good materials. Recommended.
Review translated automatically
Reliable opinion
It fits the Honda CB600F Hornet PC36 perfectly. Charge does not jump, holds the book 13.8 - 14.2 volts depending on the receivers on.
Review translated automatically
Reliable opinion
Honda transalp 600v,1995. Universal kit , well fitted , works flawlessly. Quality of materials at a high level. I recommend .
Review translated automatically
Reliable opinion
The kit fits KMX 125 without any problems. 74zł is the cheapest option I found. I recommend. The motorcycle again goes where I want it to go.
Review translated automatically
Reliable opinion
BMW R1150 RT 2002 YEAR, the replacement went quickly and without any difficulties, gaskets very good according to my expectations
Review translated automatically
Reliable opinion
Recommended. 100% satisfaction. Full compatibility. Fast delivery, seamless transaction. Thank you and best regards.
Review translated automatically
Reliable opinion
Good product - the aphrodite stopped "buzzing" at higher speeds. I also have the impression that it got a bigger kick ;)
Review translated automatically
Reliable opinion
Honda Transalp XL 600 1999. Rubber installed fits it is not orginal but can be goes in its place .
Review translated automatically
Reliable opinion
Very nice workmanship with good strong material fits the caliper perfectly works well on KTM SX 125
Review translated automatically
Reliable opinion
Sealers are made of a good rubber material by which it seals well the lagi nothing leaks. I recommend.
Review translated automatically
Reliable opinion
Everything fits as expected, good quality product, there was no problem with the fit and installation.
Review translated automatically
Reliable opinion
Very nice pegs you can see that they are not made of just anything so I put them on without any problem they look like the original ones
Review translated automatically
Reliable opinion
Recommended. The product is consistent with the photo. Carefully packed in foil, you can see that no one rummaged at it.
Review translated automatically
Reliable opinion
Honda Varadero 125, a part worth recommending, fits, workmanship good, everything works as expected.
Review translated automatically
Reliable opinion
Seal protection solidly made, I can say that even better than the originals. I recommend.
Review translated automatically
Reliable opinion
Everything fits, good value for money. The manufacturing quality of the product is good. Highly recommend.
Review translated automatically
Reliable opinion
Everything fits, good value for money. The manufacturing quality of the product is good. Highly recommend.
Review translated automatically
Reliable opinion
Good quality fast delivery, fits without any problems, recommend !!!!!!!!!!!!! Honda Hornet cb 600 pc 36
Review translated automatically
Reliable opinion
The rubbers fit and hold everything in place. Quality of fit and workmanship without any reservations.
Review translated automatically
Reliable opinion
Honda cbr 600 f4i sport - 2002. Bought the mounting wheel which I installed without any problem. I recommend
Review translated automatically
Reliable opinion
We have Motorcycle parts to Honda XL 125 Varadero
- Honda XL 125 V Varadero 2012
- Honda XL 125 V Varadero 2007
- Honda XL 125 V Varadero 2008
- Honda XL 125 V Varadero 2009
- Honda XL 125 V Varadero 2010
- Honda XL 125 V Varadero 2011
- Honda XL 125 V Varadero 2003
- Honda XL 125 V Varadero 2013
- Honda XL 125 V Varadero 2001
- Honda XL 125 V Varadero 2002
- Honda XL 125 V Varadero 2004
- Honda XL 125 V Varadero 2005
- Honda XL 125 V Varadero 2006
- Honda XL 125 V Varadero 2014
- Honda XL 125 V Varadero 2015
- Honda XL 125 V Varadero 2016