Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
2018-11-01, 20:15
Krzysztof
I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-11-01, 20:28
Krzysztof
Honda Africa XRV 750 - 1999. I bought 12 pieces. This mounting rubber is found in several places on the motorcycle(the mount of the skull rack, oil cooler, plastic handles, etc.). It looks like the original, the rubber is flexible, you can bend it with two fingers with a stronger squeeze and it looks solid. Only the course of time can verify whether it is as solid. Dimensions: Hole diameter(nominal): 10mm Width of the entire rubber: 22mm Groove depth: 8mm
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-30, 16:49
Krzysiek
I have a replica honda magna 2003 year 125ccm I was looking for rectifiers on the internet for a long time and finally found them here fast shipping I fired it up the first time good quality product solid I recommend it
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-09-30, 11:10
Венцислав
The delivery was within the agreed deadline. The products arrived as pictured. Quality seems good.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-12-13, 11:08
Pigneres
AllBalls product, therefore of good quality, sold at a very attractive price with fast, efficient delivery More than complete repair kit, allowing comfortable and safe replacement, with pad pins, hose seals and bleed caps, plus dust seals, piston seals and caliper seals
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-30, 20:41
Michał
Sealers without complaint. In a rigid and secure package a set of sealers and covers for two leaguers. Assembly trivially easy (for those who like and have an idea of DIY and small repairs). The fit is perfect. So far zero problem and the lags work perfectly in combination with Motul 10W oil.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-07-08, 19:23
Waldemar
My machine is an 86 Honda Shadow VT 1100 . Purchased parts were not dedicated for this vintage , so as a novice user I bought blind and surprisingly they fit . Installation was no problem and the material and workmanship flawless . G Moto and product on pistket . LWG .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-05-15, 22:44
Maciej
Patient Honda CB600F Hornet, vintage 2001, non-functioning fan switch. What can I say, a top-notch product. After replacement, the fan spins and works at its best. This radiator fan switch is a great product, I would recommend it to anyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-09-25, 07:22
Иванка
The product fit perfectly, I am extremely satisfied. The option from the website to specify the bike model and it tells you which product is suitable is great. The delivery was fast, they kept me informed all the time about the movement of the product.I recommend !
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-20, 06:29
Alexandros
Good morning, I was looking everywhere for this particular replacement, but I only found it in this store. I am very happy with the quality of the product in relation to the price. It's worth it and more.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-20, 06:30
Alexandros
Good morning, I was looking everywhere for this particular replacement, but I only found it in this store. I am very happy with the quality of the product in relation to the price. It's worth it and more.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-01-11, 15:36
Wojciech
XL 600VA 1987 item easy to use does not require instructions. I recommend this product. Very good quality product for its price. Fast delivery hassle-free service. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-12-27, 13:32
Mariusz
Honda Shadow VT 600 1994. The kit includes all the gaskets that need to be replaced when reconditioning the brake caliper, plus grease for the piston. Everything fit as in the original.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-09-02, 18:25
Tomáš
The above set of seals for front forks Honda Deauville NT 700 V, r.v. 2008 absolutely fine, trouble-free assembly, the product suits the type of moto, appears to be of good quality.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-30, 20:44
Michał
The protections, compared to the old ones, are slightly wider, more rigid and more "expandable", which makes them fit perfectly into the groove in the lade blocking the sealers.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-07-15, 05:30
KARLOS
Same as the original, but 75% cheaper. Quick response to e-mails. Although with a little more delay in delivery with respect to what was said on the page.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-09-11, 20:14
sara
This mounting rubber is a great replacement for the rubbers found on the Honda CBR 600, but they are slightly smaller than the original (I personally didn't mind the installation)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-19, 16:40
Krzysztof
Honda Transalp xl650 2001 year. The installation of the gaskets went smoothly, good fit , good workmanship and material quality . After installation the carburetor works like new.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-08, 13:12
Rajmund
The motorcycle is a honda transalp 600 1996r.The element fit perfectly without any reservations thanks to good workmanship and fit the repair went quickly and efficiently.Regards
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-15, 20:37
Sławomir
Honda Transalp XL V600. The pistons arrived armor-packed. The store assured that they would fit and of course they did, brakes like new. I sincerely recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-03, 07:48
Bogusław
Great sealers, they fit nice and tight even though the lag was polished, so far only about 100km after replacement but no drop on the lag, I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-04-13, 11:27
NIKOS
Excellent product. It fit properly in the caliper and I no longer have any leakage from the wear and tear of the previous one. Tourmax quality comparable to the factory ones.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-26, 12:15
Sławomir
I own a Honda NT650V Deauville. The seals seem solid because of the 2 spring rings. The previous ones only had one such ring.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-06-18, 21:11
Konrad
As great a plus as possible. The product in full working order, I recommend it as much as possible. I looked in many stores and here I found the cheapest. Price/quality 10/10.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-08-07, 09:58
Vincent
Parts corresponding to the original start at a slightly lower temperature 85/90 degrees original start at 100 degrees aesthetics equal to the original
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-07-22, 11:06
Stefanos
On CBF 500A applied correctly to the radiator and it works just like the factory switch. It also seals as it should and there are no leaks.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-08-13, 09:01
Krzysztof
It works 100% pity only that the kit does not include a copper washer. To seal the connection. Other than that, the product is of good quality. I really recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-05-24, 07:13
Remi
Sealers well made, there was no problem with the installation which indicates well-behaved parameters. Tight, oil no longer leaks.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-02-11, 17:50
Piotr
Sealers very good quality not some cheap plastic. There are 2 springs on each sealer. Fast shipping. Recommended.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-13, 11:07
maciej
Maybe I was unlucky, but not very accurate fit of the oring and diaphragm even though I did not choose the cheapest. I wish I had taken a picture.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-05-13, 07:11
Kenn
Fit perfectly which I also expected. Would definitely recommend others to order. Relatively fast shipping, but ok
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-07-29, 07:17
Sika
Product of good quality as always fast shipping art.I installed in Honda CB 750 Steven fifty degree of difficulty of installation 2/5 I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-07-27, 08:46
Eckehard
Good product delivered quickly. I searched for a while to avoid spending so much and found what I was looking for at GMOTO. That's how it should be.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-10-26, 17:04
Mariusz
Honda Shadow 1100 ACE 1996, Front brake repair kit identical to the original, when assembled everything fits perfectly.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-03-03, 05:08
Jari
Suitable and functional seals. Fast service, reasonable prices and fast delivery. I am satisfied and will order again.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-06-22, 08:03
Rafał
The seals fit suzuki gsx600f. Finally stopped leaking from the suspension and its operation improved significantly. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-01-12, 17:44
Barlet
Perfect for my 2004 Hornet. They fit perfectly, good quality for a decent price. Perfect shipping.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-06-18, 19:10
Michał
Gaskets like gaskets :) They fit and seal well. No unnecessary lint. They fit a 1984 Honda Sabre 750.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-11-09, 06:22
Maciej
Tourmax quality is similar to OEM. I've been buying for the third time in a row and I'm satisfied. I recommend and will definitely return to GMOTO ;)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-11, 14:40
Marcin
Very good quality workmanship fit perfectly to the lags 2 sets mounted on Moto and miles fly nothing leaks.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
Other models of
- Honda XL 600 V Transalp 1988
- Honda XL 600 V Transalp 1988
- Honda XL 600 V Transalp 1995
- Honda XL 600 V Transalp 1995
- Honda XL 600 V Transalp 2000
- Honda XL 600 V Transalp 2000
- Honda XL 600 V Transalp 1987
- Honda XL 600 V Transalp 1987
- Honda XL 600 V Transalp 1988
- Honda XL 600 V Transalp 1988
- Honda XL 600 V Transalp 1989
- Honda XL 600 V Transalp 1989
- Honda XL 600 V Transalp 1990
- Honda XL 600 V Transalp 1991
- Honda XL 600 V Transalp 1991
- Honda XL 600 V Transalp 1992
- Honda XL 600 V Transalp 1993
- Honda XL 600 V Transalp 1993
- Honda XL 600 V Transalp 1994
- Honda XL 600 V Transalp 1994
- Honda XL 600 V Transalp 1996
- Honda XL 600 V Transalp 1996
- Honda XL 600 V Transalp 1997
- Honda XL 600 V Transalp 1997
- Honda XL 600 V Transalp 1998
- Honda XL 600 V Transalp 1998
- Honda XL 600 V Transalp 1999
- Honda XL 600 V Transalp 1999
- Honda XL 600 V Transalp 1992



















