Motorcycle parts
Kawasaki KLX 250 R 1995 - Page 8

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2019-07-16, 20:34

View original

Bartłomiej

Hyosung gv125 Aquila year 2007 Candles replaced without any problem. Quality and appearance as it should be-motor Fires at once . Recommended product.

Review translated automatically

Reliable opinion

2021-02-22, 09:26

View original

Arkadiusz

Yamaha FJR 1300, vintage 2003. the CR8R spark plug is dedicated by the service center to fjr 1300.

Review translated automatically

Reliable opinion

2019-03-31, 12:52

View original

Michał

The GS 500 motorcycle is a machine that I use every day. It gets no concessionary fare and has to endure all sorts of roads. Sometimes fast riding on the expressway, sometimes touring on rough and bumpy roads. The result of this effort is a broken head frame bearing, which bravely endured all the forces acting on the motorcycle. It was time for a bearing from the proven Tourmax company, which I got very quickly thanks to the Gmoto.pl store. The package came quickly, well packed. Goods of the highest quality. Since the replacement of the bearing nothing has happened to the motorcycle and you can confidently continue the season.

Review translated automatically

Reliable opinion

2024-10-02, 06:12

View original

Bogdan

Hello Iridium spark plugs are currently the most technologically advanced type of spark plugs. They have center electrode tips made of iridium, a highly durable precious metal from the platinum group. The use of the precious metal made it possible to use a thinner center electrode - even 0.4 mm, NGK iridium spark plugs I use in my motorcycles improve the culture of the engine works more smoothly and dynamically very long life. I heartily recommend.

Review translated automatically

Reliable opinion

2017-08-29, 11:16

View original

Łukasz

I own a hyosung RT motorcycle its capacity is 125cm.It comes from the year 2008.It seemed to me that the product I bought (faucet repair kit) will perfectly fit my motorcycle.But unfortunately the thin o-ring sealing the faucet swelled and bent in the faucet making the faucet work very hard.At first the o-ring fit very well until it got gasoline.The kit very beaver despite this one o-ring except for it everything fit perfectly.

Review translated automatically

Reliable opinion

2021-09-13, 22:50

View original

Patryk

For Romet Zetta 50 fits like a glove - it looks identical to the Chinese original. The rubber cover on the side of the high-voltage cable, admittedly, is hard to enter the cable, but this is an advantage in my opinion - it reduces the risk of moisture getting inside. After installation, the difference is unbelievable, the spark on the spark plug has improved, it is strong, and there is no phenomenon of "falling ignition". I recommend!

Review translated automatically

Reliable opinion

2020-04-12, 02:31

View original

Kamil

I own a 1998 Aprilia rs125 motorcycle I purchased this chain because the old one was already worn out previously I had a gold dida chain bezoring but this one replaced it perfectly a very solid chain fit perfectly to my moto the installation was very quick strong safety clips. The chain was freshly lubricated so that also shortened the installation time. I recommend

Review translated automatically

Reliable opinion

2020-05-03, 00:23

View original

Maciej

Wsk 125 The frame is nice, you can't expect more from a plastic metallized one. It fits my wsk-i nicely. The only big minus is that it did not fit completely in the holes - I had to widen the holes with a drill both at the top and bottom. Other than that, installation was easy. I recommend the product for those who don't mind making up holes.

Review translated automatically

Reliable opinion

2021-05-08, 07:38

View original

Andrzej

Plastic license plate frame looks like a good chrome material I changed the plate because I became the owner of a Suzuki Intruder VL 125 2000 year all in all. Looks super material fine that's why the price very low ugly comes longer.

Review translated automatically

Reliable opinion

2025-09-07, 11:02

View original

patrick

Sorry I don't have the photo but I fitted it to my MP3 400 scooter and it idles better, my engine runs much better and I'm waiting to see what happens to my fuel consumption but in any case I recommend the product.

Review translated automatically

Reliable opinion

2017-06-06, 06:57

View original

Piotr

The appearance of the dimensions as the original, it fits perfectly, one thing I would improve regarding the appearance is the NGK inscription either on both sides of the pipe, or on one the right side and on the other the left side with the inscription so that symmetrical in the motorcycle to the cylinders fit :)

Review translated automatically

Reliable opinion

2016-04-08, 12:10

View original

Krzysztof

I purchased this pipe for my Romet ws50.I have a Lifan 120 engine mounted with an oil cooler. The standard pipe was touching my lines from the adapter to the radiator.This one allowed me to move away from them. I am very pleased with it.

Review translated automatically

Reliable opinion

2024-09-20, 06:30

View original

Alexandros

Good morning, I was looking everywhere for this particular replacement, but I only found it in this store. I am very happy with the quality of the product in relation to the price. It's worth it and more.

Review translated automatically

Reliable opinion

2019-06-17, 07:58

View original

Damian

In the category of quality/price very nice frame. Strong plastic imitating chrome. Aesthetics at a high level. Lightweight and durable And the license plate enters on contact ( for me a plus because there is no slack). I recommend

Review translated automatically

Reliable opinion

2024-05-05, 19:42

View original

Jacek

I've been through various spark plugs, including the more expensive iridium ones, but I think the best ones for touring are the basic NGK CR8E ones. I recommend and hope that the product will stay with us for years :).

Review translated automatically

Reliable opinion

2019-12-27, 13:32

View original

Mariusz

Honda Shadow VT 600 1994. The kit includes all the gaskets that need to be replaced when reconditioning the brake caliper, plus grease for the piston. Everything fit as in the original.

Review translated automatically

Reliable opinion

2025-04-30, 07:14

View original

Hajek68

The goods arrived safely. Just originally packed and in order. Exactly matches the specification for my bike. I am very satisfied. Unfortunately I don't have photos, the plugs are already fitted.

Review translated automatically

Reliable opinion

2017-09-04, 10:25

View original

Mariusz

frame very nice, put on jawa ts 350 looks very good on this motorcycle, installation also very pleasant immediately changes the name of the motorcycle adds better charm

Review translated automatically

Reliable opinion

2021-05-15, 17:48

View original

Grzegorz

Honda CB 650 Custom, 1981. Pipe very good quality, aesthetic and solid. Admittedly, the NGK inscription is not white as in the photo, but it does not bother me. I recommend.

Review translated automatically

Reliable opinion

2024-09-25, 05:27

View original

Filip

Very good solution for those who want to replace the license plate frame with a new one. The price is very affordable. The quality of workmanship is also flawless. I can recommend

Review translated automatically

Reliable opinion

2019-06-10, 20:27

View original

Wojciech

Fits perfectly, should be added to the oil refinisher, the cost is pennies and most often the protection is already affected by corrosion and suitable for replacement

Review translated automatically

Reliable opinion

2017-07-15, 03:51

View original

Gixxer

The bearings fit very well to the frame head from a 93r gsxr 750 well made And I'm surprised the garland is metal because the previous ones I had had a plastic one

Review translated automatically

Reliable opinion

2024-05-02, 17:02

View original

xxx

I am really satisfied with the purchased bolt. It is well made and meets my expectations, it is a good choice, I will definitely order something again and more than once.

Review translated automatically

Reliable opinion

2020-08-08, 13:12

View original

Rajmund

The motorcycle is a honda transalp 600 1996r.The element fit perfectly without any reservations thanks to good workmanship and fit the repair went quickly and efficiently.Regards

Review translated automatically

Reliable opinion

2025-04-13, 11:27

View original

NIKOS

Excellent product. It fit properly in the caliper and I no longer have any leakage from the wear and tear of the previous one. Tourmax quality comparable to the factory ones.

Review translated automatically

Reliable opinion

2024-07-05, 06:46

View original

Krzysztof

Great quality replacement, the previous protection totally corroded, I hope this will live a little. I replaced it on a DR 650 SE vintage 1996

Review translated automatically

Reliable opinion

2024-07-29, 06:37

View original

Bartosz

Very solid bearings, all metal, tightly fitted to the post, smooth operation, workmanship 10/10, , "made in Japan" speaks for itself.

Review translated automatically

Reliable opinion

2020-06-01, 17:53

View original

mariusz

yamaha diversion 600 2002 element purchased really good quality,without any problems installed in the shin of the front suspension recommend kind regards lwg

Review translated automatically

Reliable opinion

2023-11-06, 15:55

View original

Bartłomiej

Super bearing, the ciera now turns as it should, when hammering, it is better not to hit the cage because it can break down which almost happened to me 4/5

Review translated automatically

Reliable opinion

2023-08-21, 07:01

View original

Emilia

As usual, excellent quality from this manufacturer. Buying this product I was not disappointed, you can always be sure of high consistent quality.

Review translated automatically

Reliable opinion

2024-11-06, 12:29

View original

Motostodoła

Well-known company with good quality goods .I recommend the so-called -mucek pipe candle NGK . due also to price not only quality

Review translated automatically

Reliable opinion

2017-07-23, 09:59

View original

Michał

It fits the ETZ 250 very well. It is made of rather good material, the plug sits firmly - there is no possibility of 'popping out'. I recommend.

Review translated automatically

Reliable opinion

2025-09-18, 10:04

View original

ΔΗΜΗΤΡΗΣ

It has nickel finish but its plastic, the article says metallic but thats wrong, if you want it for enduro bike or adv its not metallic

Review translated automatically

Reliable opinion

2020-10-04, 21:49

View original

Wojciech

Romet ogar 205 What can I say pipe from a good company I use with all my motorcycles and there has never been a problem with them. I recommend

Review translated automatically

Reliable opinion

2018-05-07, 18:15

View original

Magdalena

WSK M6 B3 1982 Very good quality product easy to install. Fits perfectly, looks very good. Frame worth recommending.

Review translated automatically

Reliable opinion

2018-07-10, 09:55

View original

Maciej

Akurat mi got an item with a hidden defect invisible and while screwing it in with a torque wrench, the thread from it broke in the head.

Review translated automatically

Reliable opinion

2025-09-06, 16:13

View original

Miroslav

I still don't see a difference in performance between the classic and this iridium candle, not much for the high price. next time I'll go for a normal candle.

Review translated automatically

Reliable opinion

2024-08-05, 05:26

View original

Marcin

The set as described . Technical parameters fit Drag Star 1100 99r. Assembly quick and easy. I recommend . Good quality product

Review translated automatically

Reliable opinion

2019-07-06, 07:42

View original

Marcin

NGK is a company that produces spark plugs for many brands in the automotive industry, and I can fully recommend this spark plug.

Review translated automatically

Reliable opinion