Manufacturer
Price
Sort
średnica:
średnica:
średnica:
Podobne:
średnica:
Podobne:
Browse by manufacturer
Products reviews
2024-06-23, 08:48
Grzegorz
Hello I received not such a carburetor as I ordered and it is in the picture I received a carburetor with a second air tube . For the carburetor I paid 119 zl and received for 79 zl .Greetings .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-05-03, 17:20
Kacper
I recommend this carburetor. I put on the Derbi everything perfectly for such a price. A very big advantage is the set of nozzles that comes in the box and you can adjust the carburetor.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-07, 20:42
Młody
The carburetor itself works ok.It adjusts quite well.Pre-set and it ran quite correctly.Unfortunately I ordered a different one than I received.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-29, 12:58
Jan
The carburetor has been installed in a Zipp jazzy and a romat 2xl 2t, they work flawlessly.Scooters smoke to the touch and finally there are free revs.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 10:55
Monika
Rubber connectors with 2t carburetor spigot very well made with attention to detail fits without any problem recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-26, 16:22
Monika
Cylinder and head gasket 70 cm very good quality gaskets for 2 T scooters I recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-23, 07:14
Eryk
Unexpectedly, this carburetor surprised me with its price/quality ratio. I expected a "lousy" product for this price, but as it turned out later it is simply great. My colleague also has this carburetor (Yamaha Aerox 70cc) and I (Aerox 70cc), which factory had a carburetor with a 12mm throttle and were not very eager to start nimbly, after installing a 21mm carburetor from Gmoto, which that one was very easy because the fit of the parts was very good, the motorcycle suddenly gained power and a lot of acceleration. A colleague has had this carburetor for about 3 months and nothing has broken down yet. I recommend this carburetor as much as possible, it is not worth overpaying for much more expensive carburetors, as this one is definitely made perfectly.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-21, 08:38
Andrzej
I was looking for relatively inexpensive components to build an experimental ignition system, so that in case of failure I would not regret the "sunk" money. I bought 2T ignition coils from the company " GMOTO - motorcycle store". I guessed that this is a Chinese product and the quality will be adequate to the price. I was pleasantly surprised after opening the shipment, indeed you can smell Chinese plastic but the product itself looks quite solid. The aforementioned purchase met my expectations (+) in terms of quality and, of course, price.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-07-13, 08:10
Zbigniew
I bought this carburetor for a CPI Hussar 70cc 2000 scooter.In appearance and size it matches the Mikuni carburetor that was originally installed on this model. Visual evaluation of workmanship and materials very good. Hassle-free installation and first start-up. The carburetor pre-adjusted so that the engine fired up after 2-3 kicks. Adjustment of the mixture and RPM did not cause any problems. Now after a short time of use, the engine runs evenly and "pulls" well.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-19, 13:21
Renata
Good day I bought a carburetor here for a very attractive price and in a very easy way to pay what not all sites, stores offer online.The shipment came fairly quickly and the condition of the package was intact and very well packed.Every day I was informed when the shipment should accept whether it is already completed , shipped , also with finding the address there was no problem with the courier very highly recommend.Greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-04, 09:28
aleksander
Unfortunately, but the received gasifier turned out to be damaged , namely broken housing from the suction which made it useless. I have no time for complaints or returns, because it is again waiting for shipment. Apparently, the goods are not checked before shipment. A waste of money and time, and the scooter well - until the 10th will remain in the garage and I will again spend a fortune on bus tickets to work.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-09-21, 09:32
Hubert
I ask users when installing this gasket to clean the surface of the carburetor, diaphragm and seat at the engine. This should be done at least with extraction gasoline from the surface dirt, because in my case I had to clean it twice because in this place it unnecessarily drew left air and did not turn on the revs, after cleaning it laughs like a factory one
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-06-22, 10:14
SamuJami
The product arrived intact and matched the 70cc cylinder set I bought from gmoto. The product was flawless and the installation was easy. My scooter is a keeway f-act and I used the product to add more power to the scooter. With the cylinder kit, the product increased the power significantly. I would recommend to anyone buying the product to get a power tube along with the product and remember to break in at your leisure.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-01, 07:32
Kamil
Hello I own a keeway fact50 ordered carburetor looks like a decent design, after installation required minor adjustments but with firing there was no major problem, a dozen or so kicks to flood the chamber and ignited. I got because 2 days after ordering so quickly especially since I ordered after 18.So far I am satisfied with the purchase, greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-10-28, 08:16
Sylwia
zipp GT increased 70 ccm just change the nozzles no problems with this gasser with adjustment etc speed max 80-90 km nicely collects at 5.5gr standard rollers I have two zipp and already in the second one also this gasser is previously pseudo tuning thick coil was forever cleaning adjustment etc left revolutions ,, recommend 10/10
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-02-23, 19:41
Marcin
Zipp quantum gt5 2008r. The carburetor came the wrong one (I got it from simson), it's hard I needed it fast I didn't have time to send it back, after reworking the mount I put on the one I got it turned out that the cable mount is so delicate that the spring from the kit after putting it on ripped out the mount
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-18, 16:42
Damian
The starter is highly recommendable, after disassembly the elements in which there is friction are well lubricated housing equipped with o-rings sealing also the weather conditions are not terrible for him in the kit there is also a screw to screw on the power cord.greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-24, 09:54
Krzysztof
I ordered a carburetor for a 2009 Yamaha aerox 50cc stage 6 I am impressed with how the purchase went I had the carburetor after 2 days as for the carburetor itself it's a revelation after installation there was no need to do any adjustments the bike runs better than new I really recommend I am mega satisfied
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-10-02, 19:11
Krzysztof
Yamaha Bws 50, Romet motorynka. parts as described, well made, I bought a whole carton of parts for the motorynka all posuje motorcycle fully restored fast shipping recommend, scooter accelerated from 60 to 92 km/h, certainly will be ordering more parts Greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-23, 12:40
Kamil
I have a 2011 keeway hurricen scooter The previous gator had some kind of malfunction and the scooter did not want to run. After replacing it with a new one it ran perfectly. There was, however, a small fault with the float was leaking, but I was able to fix it easily. I personally recommend this store. ;))))
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-06-13, 09:00
Jakub
I ordered the carburetor for my 2009 Beta RR50 motorcycle, the fit of the carburetor to my bike is perfect. The carburetor worth the price even I would give more, the workmanship is good, and as for the aesthetics I would improve a little, the carburetor really performs great.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-13, 23:58
Kacper
Keeway hurricane 50ccm.One-way clutch fulfills its role.I highly recommend this product. Installation went very well clutch fits perfectly once again I highly recommend this product in 100%.There is no possibility that it does not fit.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-05, 05:22
Kacper
I am very satisfied with the product I received. The product is very well made and solidly packed for shipping. I am glad that I found this part just in this store. I think that you offer a very good price-quality ratio for your products.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-08-13, 09:44
Nuño Damian Albertos Pico
The carburetor comes very complete and with spare gums that facilitate the carburetion, I have not been able to get it to work but I do not know if it is a problem of the carburetor or the cylinder I have on. The purchase is reliable and the part seems to be of quality.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-06-22, 10:10
SamuJami
It got to me clean and exactly how it was in the pictures. All parts were oiled so it was easy to install. I already have driven with it and it works just fine and really boosts the power of the engine. I recommend this to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-25, 21:11
Mateusz
at this gasser there is a hose from the overflow immediately after unpacking was cracked one of the plastic holding the hose hopelessly disintegrates in your hands the rest of the gasser ok except that sometimes it leaks something is jammed inside
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-06-23, 20:19
Dawid
Zipp Quantum GT5 49cc 2008. The bolts are more suitable than the original bolts because you can screw them to a given torque with a torque wrench, so we can comply with the manufacturer's recommendations. :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-18, 09:28
Krzysztof
Suzuki TS 50(80) 1991r, 13000km. The carburetor came with a damaged plastic spigot probably from the overflow (not important). After installation, the carburetor immediately works, a minor adjustment of the composition of the mixture and there. recommend the product.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-06-17, 10:11
Łukasz
Keeway focus 50 2t Wheel very well made Installation went without any problems and the starter works again as if it just came out of the factory Price/quality ratio very good I recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-01-28, 18:00
Dominik
The rollers propel perfectly in a scooter with an 80ccm GY-6 engine, on a factory variator, the scooter gathers beautifully to the revs and accelerates phenomenally. Thank you very much and recommend this product ;)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-01-28, 17:57
Mikołaj
Hello I have a 2007 keeway flash 50 lever does the job and in addition it is very easy to install and you do not need much skill to put it on yourself. I highly recommend for Chinese scooters.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-04-30, 12:04
Kacper
I have this carburetor in a Malaguti F12 Phantom scooter fits very well carburetor without locks I recommend to this nozzle 90 or 85 goes like mad workmanship quality very good aesthetics also recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-10-31, 09:26
Krzysztof
The intermediate starter wheel is made very solid and aesthetically pleasing. I needed this part for my Yamaha Aerox 50 scooter and found it at your place. I highly recommend buying this part.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-15, 08:54
Marek
SKUTER FERRO 50cm Installation trouble-free part fit perfectly in place of the broken one the seller quickly completed the order. I recommend the store to all users of unicycles
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-01-10, 17:08
Oskar
I highly recommend, fast shipping and great contact with Gmoto.pl service. You can see that the store respects buyers and there is no problem to make contact. Greetings and heartily recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-12, 12:25
Brian
Keeway matrix Racing sport 50cm3. I ordered this head because I converted my scooter to 70cm3. Everything fits perfectly. Shipping very fast and professional attitude of the store staff.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-01-27, 22:32
Lukáš
Very good satisfaction with the goods, I would only point out for certain products more information. Otherwise I like to buy and cooperate with your shop. Sincerely, Lukáš Romportl.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-04-16, 21:11
Robert
Fits great for my 2006 Keeway Hurricane it works without any problems with NGK BR7ES candle purchased from this store, I highly recommend, the plus is also very fast delivery.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-11-30, 10:42
Mateusz
Super alternative at a super price. No problems with adjustment both with am6 as simson and WSK . In addition we get a set of nozzles, for this money the perfect alternative.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-10-11, 09:53
GRZEGORZ
Junak 103 50ccm 2T scooter. Recommended product. The quality of the material from which it is made better and more durable than in the cover originally installed during production.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
Other models of
- Keeway RY8 50 SP 2011
- Keeway RY8 50 Racing 2011
- Keeway RY8 50 Racing 2008
- Keeway RY8 50 Racing 2006
- Keeway RY8 50 2006
- Keeway RY8 50 2007
- Keeway RY8 50 2008
- Keeway RY8 50 SP 2008
- Keeway RY8 50 2009
- Keeway RY8 50 SP 2009
- Keeway RY8 50 2010
- Keeway RY8 50 Racing 2010
- Keeway RY8 50 SP 2010
- Keeway RY8 50 2007
- Keeway RY8 50 DD Racing 2012
- Keeway RY8 50 DD Racing 2013
- Keeway RY8 50 DD Racing 2014
- Keeway RY8 50 DT Racing 2007
- Keeway RY8 50 DT Racing 2008
- Keeway RY8 50 DT Racing 2009
- Keeway RY8 50 SP 2011
- Keeway RY8 50 SP 2012
- Keeway RY8 50 SP 2013
- Keeway RY8 50 Racing 2008
- Keeway RY8 50 Racing 2009
- Keeway RY8 50 EVO Sport 2010
- Keeway RY8 50 2011
- Keeway RY8 50 2011
- Keeway RY8 50 2012
- Keeway RY8 50 2013
- Keeway RY8 50 Sport Evo 2007
- Keeway RY8 50 Sport Evo 2008
- Keeway RY8 50 Sport Evo 2009
- Keeway RY8 50 Sport Evo 2011
- Keeway RY8 50 Sport Evo 2012
- Keeway RY8 50 Sport Evo 2013
- Keeway RY8 50 Sport Evo 2014
- Keeway RY8 50 Sport Evo 2015
- Keeway RY8 50 Sport Evo 2016
- Keeway RY8 50 Sport Evo 2017
- Keeway RY8 50 Sport Evo 2018
- Keeway RY8 50 2011
- Keeway RY8 50 2010

































