Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
2019-10-01, 19:59
Kacper
My "motorcycle" is a Romet 777 50cc 2008 Sport version, the installation went well, there are no damaged parts .The scooter accelerates and rides much faster than before the installation of purchased parts and looks very good, workmanship is very good. The product fits perfectly to my scooter model .The product is in agreement with the stated description on the website. I recommend this product to all other users of scooters and mopeds who need a kit that will meet their expectations.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-11-22, 14:58
Andre
I bought 2 sets of cylinders. There was nothing wrong with one of them. On the second, the liner was honed at an angle. In the upper area of the liner, an approx. 3 x 5 cm area was not covered. One piston had the recesses for the valves milled at an angle. See photo. The other is obviously already an oversize piston. As I have access to appropriate machines, it wasn't too bad for the hobby project.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-08, 21:10
Łukasz
I have owned (already used) a router delux 1 scooter (engine capacity 50 cc) for a short time. This is my first scooter. On gmoto.pl I ordered some necessary parts to start this horse :) The starter with bendix is made solidly and it is easy to install.Everything agrees with the offer. I have no reservations about the store or the parts, so I can confidently recommend it to any owner of a unicycle. Regards.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-02-21, 08:42
Konrad
Kingway Zibo 50 vintage 2003 I bought the cover from gmoto I am very satisfied the cover meets all the conditions it is really durable I highly recommend as well as other products from this store, because they are really persistent greetings!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-02-18, 09:03
Piotr
Kingway Coliber scooter. Parts in quality even better than the original. Assembly went without a problem. The same parts on a popular auction site yesz that once so expensive so the price/quality ratio super!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-12, 10:39
Dominik
I own a motorcycle Romet Ogar 200.The fuel filter performs very well, it does not leak or let through the "garbage" that may be in the fuel tank. It fully fulfills its role.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-11-12, 12:41
Oskar
Hello I have a 50 ccm scooter and the kickstand set goes perfectly into the belt cover , it took well meshes nothing creaks goes evenly with no complaints .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-12, 18:47
Michał
Skutet zipp triad 2 4t runs on kick thanks to your products , if it were not for your parts I would have to continue to carry a charger with me ;) Regards.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-25, 14:00
Dorota
Product very well made great fit for motorcycle with 139qmb gy6 engine. The description of the goods is very accurate and with the real.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-02-10, 10:44
Radek
I recommend buying this universal fuel filter because it is well made and easy to install at this price it is probably the best fuel filter
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-03, 13:31
Monika
Cylinder MCN 80cm3 4T cylinder a very good class cylinder gives a lot of power I recommend to all who want to increase the capacity of the scooter recommended
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-07-10, 10:39
Michał
Scooter capacity 50 ventus modo 2 kit does the job I've been riding it for a few weeks now it still flows works highly recommend :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-09, 09:20
Monika
Kicker+starter+half-moon set very well made with attention to detail fits without a problem recommend to all
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-09, 10:58
Monika
Valve cover gasket 4t o-ring very good quality nothing worth replacing when adjusting valves recommend to all
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-26, 17:03
Monika
Head 90cm very good head for 90cm cylinder well made with attention to detail recommend to all
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-22, 12:11
Jarosław
The filter is good and there is nothing to complain about . It fulfills its role in Benzer Texsas 50 . I recommend !
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-07, 13:54
Grzegorz
I own a Baotian 50cm3 scooter , for a long time it tore my belts , I looked for a service, but no one wanted to undertake the repair or even diagnose the problem . Short decision .though I am a layman in mechanical matters I ordered parts ( I just had to find my scooter model ) , I dismantled the old , replaced with sent to me by Gmoto (it took me 20 minutes) .skuter rides like new . The problem is gone . Everything fit perfectly and what amazed me , the quality of the parts much better than what I bought from other stores . Since the installation of the parts I drove about 150 km and out of curiosity or rather concern I looked into whether there was something wrong with the belt . everything great .I also had concerns about the variator rollers , but you can see that everything perfectly matched to the kit . To sum up .quality parts fit perfect , without hesitation I recommend this kit , greetings .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-20, 07:08
hervé
fits perfectly on a scooter with a 139qmb 10" engine, takes 30 minutes to assemble, the quality is decent but no more than that, to be seen over time. delivery was catastrophic, I had to wait almost 3 weeks and with the DPD company they don't deliver to the customer but to a relay. I had to travel 120 km to pick up my order, which was stored at the Vemars depot, more than 59 km from my home, so additional costs plus time wasted. no commercial gesture so far from Gmotos. to be continued.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-10-11, 21:25
Rafał
Toros F16, everything even better than in the pictures, easy replacement and works as expected. Just a reminder because I forgot myself that you also need to have the clock ring in good condition to make it stick somehow And if someone does not know what and how is Youtube will explain :) best parts site with good price! Delivery also fast, ordered in the evening A 2 days later in the parcel machine package ready for pickup !
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-04, 18:31
Ryszard
I have a scooter Kingway Mosqito 50 cm 2008 year I have purchased many things for it including clutch bell tuning R-Vent 107mm 4T from a reputable company with the repair of these components I have never yet had problems after purchase everything well matched and matched quality of materials and aesthetics very good.I recommend to everyone this store is a higher shelf.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-18, 08:18
Pawel
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-01-16, 13:45
Paweł
Unfortunately I can not recommend this filter, because I got it with a defect, on the weld there was a very small invisible hole through which gasoline poured. I put the motorcycle together poured gasoline and here it dripped, and unfortunately it gave me a heap of work because I had to take everything back apart. But I'm not going to make an issue about a few zlotys.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-03-19, 10:01
hervé
very good quality cylinder head, adds power when the engine revs up, which can be felt on acceleration and top speed, gaining at least 10km/h if you add an A9 camshaft or more, you'll gain even more, that's for sure! Perfectly packaged .thank you Gmoto .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-22, 05:47
piotr
Hello I naprowiam skutrey,Qady etc.Ordered parts really are OK . If you order a good part, it rather has to fit, personally as a mehanik I recommend cylinder 65cm for GY6 4T IS in my opinion the best, fragile, 50 has too little power, 80 can take oil in a short time exploatation Greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-25, 06:36
Maciej
Purchase as successful as possible, it's nice to fire up the starter again! Everything works and fits seamless replacement. The only thing to pay attention to is the termination of the cable because it is on the eyelet, and in my case needed a plug, but this is just so informative ;) I recommend the product as much as possible.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-14, 07:11
Maciej
Everything fits perfectly to the scooter for which I bought this set and as much as I can recommend the quality of the material very good and durable, the whole set is fitted and nothing was missing and the assembly in just 5 minutes. I am very satisfied with this product and recommend it as much as possible !
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-05-28, 08:00
Robert
Romet 727 scooter, the purchased kit was original, matching the scooter except for one part, changed technologically- in my case it occurs on the axle, which I can not remove from the lid, and in the new one is fused this mode with the axle. But the rest of the parts cured the scooter, so I am satisfied;-)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-02-13, 17:33
Andrzej
Nuts at an excellent price for 4 hard replacements for the original exhaust mounts on the Honda XR 125. Excellent value for money and a compromise between the original ones difficult to find only in Honda service, for a much larger sum! Highly recommended! 30 years of experience in mechanics!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-19, 17:22
Rudolf
I mounted the front shield on an electric tricycle, still on a test basis. Aesthetically it looks good.If I order a bigger size I will order a plexi, for better clarity. For this type of a bargain price, there is a slight blurring. However, due to the height, it does not matter in the view in front of me.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-07-24, 21:26
Daniel
Good morning everyone I bought this product (gasser) I rate it very good immediately after installing it into the scooter without any interference with the settings of the gasser the vehicle fired up and runs evenly unlike the old gasser it is made of good materials. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-06-04, 17:52
Przemysław
I purchased valve seals for a 150cc quad. I also bought a starter and a set of gaskets also for this quad. With the quality of the parts I bought so far I am satisfied. As for the seller also no reservations. Fast shipping and hassle-free. I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-04, 08:56
Marcin
I highly recommend the variator,scooter rex rs 500 and everything works very well,product fit very good,installation is easy,sport clutch with cables greatly improved the performance of the scooter,as well as the variator,I think it was a good choice,Highly recommended
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-05, 08:00
ADAM
I own a 4t Fonero scooter.The purchased gasser perfectly fits my unicycle.It does not require any adjustments.Simple installation makes the replacement trivial. Taking into account the fast and efficient delivery and high quality of the goods I heartily recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-07-16, 05:03
Rafał
Everything is fine with the carburetor. After installation, it was necessary to adjust the nozzles from the mixture and free speed. The only thing that I can attach is the air filter, the diameter was too large than so from the carburetor, but the clamp managed. I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-01-22, 19:14
Bartosz
Router Sport 4t. I redid the engine but had a head that was too small, I ordered this product and it is very good, workmanship really high, no leftovers from the processes, the camshaft with the bridge fits elegantly. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-28, 12:42
Patryk
Hello have a 2008 kingway koyot 50 cm3 scooter the starter and bendix arrived to me in an undamaged way which proves that the company packaged them well :) starter looks nice and easy to put on the same as the bendix 10/10 greetings!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-28, 12:42
Patryk
Hello have a 2008 kingway koyot 50 cm3 scooter the starter and bendix arrived to me in an undamaged way which proves that the company packaged them well :) starter looks nice and easy to put on the same as the bendix 10/10 greetings!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-04-13, 13:35
Artur
Motobi Owl 4t 2014 scooter. The starter does its job perfectly, the scooter burns to the touch, the new bendix bounces at the right moment, nothing creaks. Installation trivially easy, all you need is the desire and half an hour of free time. I recommend :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-05-29, 21:56
Mateusz
Hello I have a moped company kingway tiggero poj.50ccm with small modifications to90ccm. I ordered from you a gasket and head which is in working order and 100% perfect,Goods ordered from you are worthy of recommendation
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-01-27, 09:58
patryk
Zipp Basic 50 scooter very comfortable to the touch and very good to assemble quickly and nimbly without any problem. The workmanship of this product goes off the scale simply excellent. The hump fits well and nothing knocks nothing knocks .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion






























