Motorcycle parts
Kreidler Florett 50 RMC-C 2004

2022-06-25, 10:33

View original

Karol

Junak 104 2T 2013 Very nicely made cylinder for reasonable money If someone gets clogged with a serial cylinder, an interesting solution is to buy this cylinder, for this nozzle is 0.10 more than before and for a little money we have a really dynamic equipment I have already driven 2500 km on this cylinder without any reservations Please do not expect a colossal difference in power compared to the series in my opinion, thanks to this cylinder significantly increases the torque and a little power at higher revs. + Good price + Relatively good performance + Inexpensive way to increase power -Very loose rings which makes it hard to put the cylinder on (once you put it on they come off very nicely) - Sfloor locks are difficult to turn (the push-in ones are better) - Too bad there is no exhaust gasket in the set Final rating: 9/10

Review translated automatically

Reliable opinion

2019-11-30, 16:57

View original

sylwester

Scooter inca street 50 year of production 2009 mileage of about 14000 I ordered a cylinder + heads 70ccm reason to reduce fatigue of the engine, after opening the box with the parts I started by inspecting the workmanship, I watched all the channels in which there are in the cylinder the workmanship itself is very good, the very tinkerer went through very easily from disassembly after assembly it took me 40 minutes if anyone has the idea to repair vehicles themselves it will do it in a similar or shorter time, currently taken picture is not fully visible but they are newly purchased things

Review translated automatically

Reliable opinion

2022-11-24, 14:55

View original

Kacper

Zipp Rooster 50cc 2008 AC I am 100% satisfied with my purchase. Easy installation, everything fit perfectly. The product has met my expectations. Currently drove about 2500km on this kit and no problems. Everything made with attention to detail.

Review translated automatically

Reliable opinion

2022-01-03, 15:17

View original

Antek

I recommend this carburetor very good quality workmanship Fits under serial parts and under tuning parts should be in it only still replacement nozzles works well even in heavy terrain

Review translated automatically

Reliable opinion

2021-05-03, 17:20

View original

Kacper

I recommend this carburetor. I put on the Derbi everything perfectly for such a price. A very big advantage is the set of nozzles that comes in the box and you can adjust the carburetor.

Review translated automatically

Reliable opinion

2021-09-09, 13:33

View original

Marcel

Zumico EOS original 50cc currently 70cc on parts from this site performs very well durability good recommend highly.

Review translated automatically

Reliable opinion

2019-08-06, 14:10

View original

PAWEŁ

Pipe not bad but fragile fully shielded candle clamp only on the thread so the thread is destroyed price adekfatna to quality

Review translated automatically

Reliable opinion

2019-07-29, 23:38

View original

Maximus

Goods of very good quality.Efficient shipping as always .Recommend Gmoto Thank you and best regards Maximus

Review translated automatically

Reliable opinion

2018-07-20, 15:07

View original

Miłosz

As for such a low price it is worth buying fits perfectly to Romet ogar 205 so far works well. recommend.

Review translated automatically

Reliable opinion

2017-09-23, 07:14

View original

Eryk

Unexpectedly, this carburetor surprised me with its price/quality ratio. I expected a "lousy" product for this price, but as it turned out later it is simply great. My colleague also has this carburetor (Yamaha Aerox 70cc) and I (Aerox 70cc), which factory had a carburetor with a 12mm throttle and were not very eager to start nimbly, after installing a 21mm carburetor from Gmoto, which that one was very easy because the fit of the parts was very good, the motorcycle suddenly gained power and a lot of acceleration. A colleague has had this carburetor for about 3 months and nothing has broken down yet. I recommend this carburetor as much as possible, it is not worth overpaying for much more expensive carburetors, as this one is definitely made perfectly.

Review translated automatically

Reliable opinion

2018-07-09, 08:15

View original

Zbigniew

I bought the cylinder, piston and head for a 2000 CPI Hussar scooter, changing the factory 50 cc to a purchased 70 cc. Visual assessment of the quality of materials and workmanship is not objectionable. Both the installation and the first start-up without problems. The piston and cylinder are only in the run-in phase, nevertheless, the performance of the engine is flawless, and the power has clearly increased (assessed in terms of top speed).

Review translated automatically

Reliable opinion

2017-06-18, 19:35

View original

Jaczeg

Zipp Quantum, good quality cylinder, very good price. In general, I recommend so far everything rides like from the factory and I hope it will serve a long time. The scooter is much more dynamic, v-max has improved. Riding has become much more pleasant than on a 50cc I really like Gmoto store because I can order many different things with one shipment. And as for the cylinder I highly recommend

Review translated automatically

Reliable opinion

2017-04-09, 16:36

View original

Daniel

Ignition pipe bought for a WSK 125 motorcycle, at first glance it looks perfect, a very important advantage is the covers to protect against moisture or driving in the rain. Why aesthetics "could be better", because the workmanship is good, but not refined. The important thing is that it works as it should, and I am also very satisfied with the service of the GMoto store, also recommend.

Review translated automatically

Reliable opinion

2024-07-01, 09:05

View original

Kamil

"After installing the 70 2T cylinder and head in my scooter, I immediately felt the difference. The scooter has gained power and acceleration, which makes riding more dynamic and satisfying. The solid workmanship of these parts gives me confidence that they are not only efficient, but also durable. Now I can enjoy a smoother and more exciting ride!"

Review translated automatically

Reliable opinion

2021-08-28, 18:53

View original

Mariusz

Aprilia SR 50 AC cylinder fits very perfectly beautifully made nothing sticks out no blemishes on the outside no ducts can be seen no holes nothing sticks out inside which greatly affects the quality and flow resulting in smooth power output and life tests but the predecessor of unknown origin seized up after 10 km deflated like a balloon

Review translated automatically

Reliable opinion

2022-07-11, 14:49

View original

Rafal

I am very satisfied I read the opinion of these cylinders on the forums and I find that people do not rightly embed cheap cylinders I have and my Ferro 803 years like crazy I understand that someone has more money and flies thick with purchases of good branded parts I do not need it and I appeal to others Chinese does not mean bad greetings gmoto

Review translated automatically

Reliable opinion

2020-04-18, 08:17

View original

Pawel

Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.

Review translated automatically

Reliable opinion

2016-02-23, 19:41

View original

Marcin

Zipp quantum gt5 2008r. The carburetor came the wrong one (I got it from simson), it's hard I needed it fast I didn't have time to send it back, after reworking the mount I put on the one I got it turned out that the cable mount is so delicate that the spring from the kit after putting it on ripped out the mount

Review translated automatically

Reliable opinion

2021-03-13, 14:40

View original

Oliwier

I own a 2008 Yamaha TZR 50 brand motorcycle the installation of the product was fabulously easy no effort required the product fulfilled its task 100% if someone is looking for an ignition pipe I recommend this model, because it is an excellent quality product. I heartily recommend and greetings.

Review translated automatically

Reliable opinion

2021-06-26, 07:42

View original

Łukasz

Kreidler Rmc-c 50cc scooter. I ordered this kit quality of workmanship very good everything fits nicely overall I am satisfied. I ordered this cylinder about a week ago. I just received it everything in is fine. I recommend to each individual and most importantly very fast shipping.

Review translated automatically

Reliable opinion

2018-05-06, 09:43

View original

Krzysztof

The nozzle is ideal for adjusting the carburetor on a Chinese 2t scooter (zipp quantum). This is the most common nozzle size for unlocking scooters by removing the constriction in the air filter. The difference between before and after is 5km/h V-max and feel a marked improvement in performance.

Review translated automatically

Reliable opinion

2018-06-18, 13:14

View original

Piotr

The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.

Review translated automatically

Reliable opinion

2020-04-10, 14:20

View original

Marek

Romet RXL 2011 2t It fits this carburetor, unfortunately I changed from 68 (original) to 75 and it ran worse(on the old one it reached 8k rpm on the new one 6k). I would recommend buying someone with a better air filter(such as a conical). Overall the jetting ok, size shows, screws in well.

Review translated automatically

Reliable opinion

2025-03-04, 05:19

View original

Stefan

Very good product, great quality and workmanship. The good (manufacturer and model) search functions make it almost impossible to make a bad purchase. I found parts with you that were not even available from the manufacturer...The delivery was also always problem-free....Top

Review translated automatically

Reliable opinion

2018-04-26, 11:59

View original

Artur

Zico simpli 2t, 2006r, 7500 km mileage, unfortunately, but the cylinder did not meet my expectations, the poor quality of workmanship unfortunately determined the decision to return the product, the cylinder had fatally finished windows in the sleeve, I was afraid that the rings would begin to hook against them and crack,

Review translated automatically

Reliable opinion

2022-06-13, 09:00

View original

Jakub

I ordered the carburetor for my 2009 Beta RR50 motorcycle, the fit of the carburetor to my bike is perfect. The carburetor worth the price even I would give more, the workmanship is good, and as for the aesthetics I would improve a little, the carburetor really performs great.

Review translated automatically

Reliable opinion

2018-03-13, 09:10

View original

Marek

The cylinder is of good quality, the only thing I would complain about is the quality of machining of the flushing channels. They are not symmetrical with respect to each other (I mean those smaller flushes) but what to expect for such a price? For this kind of money anyway it is mega positive.

Review translated automatically

Reliable opinion

2019-04-25, 12:39

View original

michał

I warmly recommend gmoto.pl store is here a lot of parts for motorcycles and mopeds parts as described and also fit motorcycles fast shipping and also fast turnaround time parts made of good solid materials.

Review translated automatically

Reliable opinion

2022-09-13, 09:45

View original

Bartek

I own a KTM go 50/70 kit is generally ok everything fits as a budget kit meets its requirements. I only have a remark because I heard that with harsh lapping the piston can melt. I would recommend lapping carefully and pour good oil for example motul 710

Review translated automatically

Reliable opinion

2018-10-01, 13:49

View original

Wojciech

I have a scooter Cpi popcorn 50 the whole kit came quickly it was well packaged I put this kit in the motorcycle and everything runs very well the power increased a lot the kit is cheap and good I highly recommend it. Unfortunately I have no pictures but everything looked good

Review translated automatically

Reliable opinion

2024-05-02, 19:39

View original

Paweł

The pipe checks out, spark ok, no puncture, especially since the vehicle lacks an ignition switch and pulling the pipe takes care of it. There were no kicks (although I know that this should not be done, but well. who is blameless let him be the first. ?

Review translated automatically

Reliable opinion

2025-08-13, 09:44

View original

Nuño Damian Albertos Pico

The carburetor comes very complete and with spare gums that facilitate the carburetion, I have not been able to get it to work but I do not know if it is a problem of the carburetor or the cylinder I have on. The purchase is reliable and the part seems to be of quality.

Review translated automatically

Reliable opinion

2018-06-05, 21:50

View original

Miłosz

Ogar 200 This pipe the only pipe maker will really make you happy. Do you have a problem with the disappearing spark? try to replace the pipe and you will find that the spark will not escape anywhere ! quality good everything fits robukt made aesthetically and nicely.

Review translated automatically

Reliable opinion

2019-09-15, 15:45

View original

Wiesław

I bought this product "in stock" , however, it looks very good. As soon as I mount it somewhere I will write what and how, but I can already see that it will be good as with the previous pipe only that straight mounted to Yamaha Majesty 125 1998 vintage.

Review translated automatically

Reliable opinion

2022-06-25, 10:12

View original

Karol

Junak 104 2t 2013 Very good quality workmanship, the nozzle actually size is about the dimensions it should be, the only thing to which can be attached is that it is slightly higher than the original but it does not interfere with anything.

Review translated automatically

Reliable opinion

2018-01-17, 07:14

View original

Tomasz

Hello, I own two 1985 M-2 motorcycles and one 1987 M-3. I am currently in the process of rebuilding each in turn. The parts I bought from Gmoto met my expectations. They were of good quality and fit without any problems.

Review translated automatically

Reliable opinion

2017-09-25, 21:11

View original

Mateusz

at this gasser there is a hose from the overflow immediately after unpacking was cracked one of the plastic holding the hose hopelessly disintegrates in your hands the rest of the gasser ok except that sometimes it leaks something is jammed inside

Review translated automatically

Reliable opinion

2018-04-03, 15:34

View original

JERZY

Motorcycle 50 ccm,year of production 1986 it is known not the first youth .When starting sometimes the spark disappeared.So it had to be replaced with a new one and I heard the first sounds of the long unheard of engine of my youth

Review translated automatically

Reliable opinion

2020-02-25, 20:00

View original

Patryk

The product is made very well the holes all fit well into the channels,very good quality material it is made the piston the same very nice I would only recommend buying parts from Gmoto Lancut thank you.

Review translated automatically

Reliable opinion

2017-09-18, 09:28

View original

Krzysztof

Suzuki TS 50(80) 1991r, 13000km. The carburetor came with a damaged plastic spigot probably from the overflow (not important). After installation, the carburetor immediately works, a minor adjustment of the composition of the mixture and there. recommend the product.

Review translated automatically

Reliable opinion