Motorcycle parts
Malaguti F15 50 DD Firefox AC 2005 - Page 2
Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
2017-09-23, 07:14
Eryk
Unexpectedly, this carburetor surprised me with its price/quality ratio. I expected a "lousy" product for this price, but as it turned out later it is simply great. My colleague also has this carburetor (Yamaha Aerox 70cc) and I (Aerox 70cc), which factory had a carburetor with a 12mm throttle and were not very eager to start nimbly, after installing a 21mm carburetor from Gmoto, which that one was very easy because the fit of the parts was very good, the motorcycle suddenly gained power and a lot of acceleration. A colleague has had this carburetor for about 3 months and nothing has broken down yet. I recommend this carburetor as much as possible, it is not worth overpaying for much more expensive carburetors, as this one is definitely made perfectly.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-08-31, 10:17
Samuel
The problem - you get on the scooter. You fire it up and. The whole village knows about it. The roar of a leaking 2T wakes everyone up faster than the bells of the surrounding church. You immediately become public enemy number 1. How to remedy this? If only with the help of a gasket like this one. It's an expense of a few zlotys, and it can really reduce the amount of decibels coming out of your scooter's engine, and let's be honest, the shriek of a 50cm³ trying to drive up a hill is not a sound everyone wishes for at 6⁵⁰ in the morning.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-07-07, 00:39
Miłosz
To the point, at this price you will not find anything better. The faucet fits performs great. At first I had doubts about the quality of the product after the pictures, but I took a chance and thanks to it I fixed my motorcycle cheaply. I recommend the product to everyone Quality great. Pressed in and holds great zero backlash. Aesthetically this I do not comment because it is not even visible during normal use. I recommend the product to everyone.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-05, 17:00
Dariusz
Suzuki GSXF750 1999.Goods of very good quality, helpful not only in the installation of the fairings of scooters as you can see.I had a problem with finding the original mounting plates for screws to fasten the fairing to the console, especially since the sockets are very narrow and hard to fit something. And here you go, not only good quality, fast shipping, but also a nice price ;-) And there goes the problem. (Until I ordered more - for colleagues)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-02-23, 19:41
Marcin
Zipp quantum gt5 2008r. The carburetor came the wrong one (I got it from simson), it's hard I needed it fast I didn't have time to send it back, after reworking the mount I put on the one I got it turned out that the cable mount is so delicate that the spring from the kit after putting it on ripped out the mount
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-12-26, 11:24
Andrzej
Lambretta C125 1951 year of production. The wrench is very good, short, only with it I can reach the candle. In addition, it has hexagonal sockets cut in the handle to handle bolts and nuts in sizes often encountered. The wrench fits very much with the climate of my old scooter.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-13, 19:06
Zita
Wsk 125 gil. Trying to restore it after 20 years of sleep in garage. Had to change spark plug. Chose tool randomly; I was a bit worried, that spark plug key won' t fit cause engine head looked kind of big, but it fit just fine. Spark changed. We have ignition :).
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-06-13, 09:00
Jakub
I ordered the carburetor for my 2009 Beta RR50 motorcycle, the fit of the carburetor to my bike is perfect. The carburetor worth the price even I would give more, the workmanship is good, and as for the aesthetics I would improve a little, the carburetor really performs great.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-18, 16:31
Filip
Junak Vintage 50cc, the interrupter works like a dream, works with LEDs (no faster blinking). The only downside is that it has reversed wires in the plug compared to the original, but it is very easy to open it and solder the wires in their places
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-07-24, 01:32
Jussi
It was a bit too racey for me so I got my scooter to brake which is not good for the engine. If my technique was more tractive and race-hardened it might be good. But as I was stupid enough to order one that was too tight, what can you do about it?
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-08-13, 09:44
Nuño Damian Albertos Pico
The carburetor comes very complete and with spare gums that facilitate the carburetion, I have not been able to get it to work but I do not know if it is a problem of the carburetor or the cylinder I have on. The purchase is reliable and the part seems to be of quality.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-02-17, 09:48
Jan
Romet ogar 205, 50 cm³, 1987r The wrench fits nicely with the old tools for my ogar, it's very similar to the ones from the communist era, the only downside is that it's not exactly bent and has a slight play on the spark plug itself, but other than that I recommend it
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-05-19, 18:59
Wojciech
Yamaha Aerox 50ccm I bought a cylinder to buy the original gaskets for another 80ccm cylinder died after 2 days. I bought the product from gmoto fits much better than the given company nicely and aesthetically packaged. I heartily recommend the product.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-25, 21:11
Mateusz
at this gasser there is a hose from the overflow immediately after unpacking was cracked one of the plastic holding the hose hopelessly disintegrates in your hands the rest of the gasser ok except that sometimes it leaks something is jammed inside
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-25, 11:54
maciej
Peugeot Ludix One Rp.2004. After installation it fired up after a few kicks. Work stable / correct both at idle and while driving. I rate the carburetor as excellent worth the price AND as described by the seller. !!!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-07-04, 13:58
Bartosz
The belt is made very solidly, we get a very good belt for very little money which perfectly fits scooters with minarelli engine. After tearing off the old belt and putting on the new one, you feel a significant improvement in performance.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-18, 09:28
Krzysztof
Suzuki TS 50(80) 1991r, 13000km. The carburetor came with a damaged plastic spigot probably from the overflow (not important). After installation, the carburetor immediately works, a minor adjustment of the composition of the mixture and there. recommend the product.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-28, 19:43
Wojciech
Hello I would recommend this product very good carburetor at an excellent price.There is an improvement in internal cooling and a significant increase in performance.Complies with the seller's description and performs 100% in my scooter.Worthy of Recommendation!!!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-29, 15:04
Jarosław
I INSTALLED THE CARBURETOR WITHOUT ANY PROBLEMS IN APRILA CLASSIC 80CM3. Carburetor made entirely of aluminum alloy, very good quality. Well tuned with this capacity. recommend to others interested.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-05-28, 13:59
Jean seb
Product as described, with no negative comments on my order. A product that I recommend to buy because the price is attractive and the quality is not too bad... Thanks to YOU the team...
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-02, 08:25
andrzej
Scooter zipp triad 2 ordered products are waiting for installation at a later date , I was able to repair the damaged , visually they look good quality .I want to emphasize the speed of delivery , regards.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-31, 16:03
STEFAN
Hello,the goods fit perfectly,everything fits like from the factory thanks to this I did not have to buy a new gasser,after putting on the set the gasser came to life and works sensationally. Thank you and best regards.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-01-10, 17:08
Oskar
I highly recommend, fast shipping and great contact with Gmoto.pl service. You can see that the store respects buyers and there is no problem to make contact. Greetings and heartily recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-06-13, 14:26
Dariusz
Replacement of a plug in a WSK 125 Gil, went without a problem, the key fits, and has the look of a key of the era and that was the point, to collect a set of keys similar to those of those years. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-01-11, 16:18
Marcin
Carburetor very good for the price, to 50 just right nothing to add nothing to take away nothing to complain about, included suction automatically + attached is a cable for manual suction.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-15, 07:39
Maciej
I have a 2007 or 2008 rieju nad 125 the previous one broke down and I had to give the replacement to the original it is not because it does not have a fuel level sensor but it's nothing give it a go
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
Other models of
- Malaguti F15 50 DD Firefox AC 2006
- Malaguti F15 50 DD Firefox Digit LC 2006
- Malaguti F15 50 DD Firefox AC 2007
- Malaguti F15 50 DD Firefox Digit LC 2007
- Malaguti F15 50 DD Firefox AC 2008
- Malaguti F15 50 DD Firefox Digit LC 2008
- Malaguti F15 50 DT Firefox LC 2000
- Malaguti F15 50 DD Firefox LC 2002
- Malaguti F15 50 DD Firefox AC 2004
- Malaguti F15 50 DT Firefox AC 2008
- Malaguti F15 50 DD Firefox Digit LC 2003
- Malaguti F15 50 DD Firefox AC 2006
- Malaguti F15 50 DD Firefox AC 2007
- Malaguti F15 50 DD Firefox AC 2008
- Malaguti F15 50 DD Firefox LC 1999
- Malaguti F15 50 DD Firefox LC 2000
- Malaguti F15 50 DD Firefox LC 2002
- Malaguti F15 50 DD Firefox Digit LC 2006
- Malaguti F15 50 DD Firefox Digit LC 2007
- Malaguti F15 50 DD Firefox Digit LC 2008
- Malaguti F15 50 DT Firefox LC 1998
- Malaguti F15 50 DT Firefox LC 1999
- Malaguti F15 50 DT Firefox LC 2000
- Malaguti F15 50 DD Firefox LC 1998
- Malaguti F15 50 DD Firefox LC 2001
- Malaguti F15 50 DD Firefox Digit LC 2004
- Malaguti F15 50 DD Firefox Digit LC 2005
- Malaguti F15 50 DT Firefox LC 1997
- Malaguti F15 50 DD Firefox LC 2003




























