Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
MZ TS 150 1982
Manufacturer
Price
Sort
Options +5 rozmiary:
rozmiary:
rozmiary:
rozmiary:
Podobne:
Podobne:
from 2
Browse by manufacturer
Products reviews
The rear sprocket cover does not fit the MZ TS 150. The chain rubbers do not come on the sprocket rubber. A more serious problem, however, is that the counter drive shaft, when inserted, you can see it completely does not fit. The hole of the screw that holds it is not in the right place. In addition, the place into which the speedometer shaft enters is prepared for a completely different shaft - a little longer. The one from the MZ TS 150 is too short. Assessing the usefulness of the chain guard, I believe that without modifications will not do. The chain guards themselves as much as possible are for the TS 150, I compared with the original rubbers and here I have no objections.
Review translated automatically
Reliable opinion
The chain casing has a lot of left overs, it could be more machined. Other than that, the casing is not very solid. The cover rubbers are very well made. Shiny flexible and overall I have no complaints. The description on the store's website said that the chain comes with a clasp. In truth the clasp is, but in a separate package, and in turn the foil in which the chain was is torn. Also, there is no certainty that this is an original Czech fastener. Especially since there is no logo on it. The gears are well made and solid.
Review translated automatically
Reliable opinion
Money thrown down the drain in the front lights bulbs 5W and in the original I have 21W I thought what's the problem I'll put the old ones and here's the problem they don't fit, you can't screw on the cover of the turn signal, now on these bulbs blink very quickly you need to look for the orginals
Review translated automatically
Reliable opinion
Simson KR 51/2 Schwalbe 1985. Excellent stopper, fit and installation seamless. After inserting into the faucet, I recommend soaking with gasoline - then we immediately have a full seal tightness of the gasket. Photo from several hours of testing. Recommended.
Review translated automatically
Reliable opinion
Moped Simson s51 enduro N version very good I can recommend but they are not in appearance like the original umnie it could be factory defects but they look good for the price
Review translated automatically
Reliable opinion
WSK 125 75r | The frame fits in the org. holes in the rear lamp mount. I recommend, because this product is worth its price and it is practically indispensable in the mounting of the plate.
Review translated automatically
Reliable opinion
In this price range, there is nothing to complain about. The product will do its job. It should certainly survive more than one motorcycle trip.
Review translated automatically
Reliable opinion
Simson s51 enduro 1990 turn signal is really very well made,very well fitted and very good looking
Review translated automatically
Reliable opinion
Romet 100,1983, very good workmanship, shines well. I have been riding for a while day/night and you can see the whole rear. I recommend.
Review translated automatically
Reliable opinion
Motorcycle MZ TS 250 year of production 1975 shield fitted to the rear wheel made of strong plastic.
Review translated automatically
Reliable opinion
I own a motorcycle Mz ETZ 150 year 1989, I had a damaged carburetor so I decided to buy a new one. Among many offers Gmoto store stood out, they have parts for branded motorcycles unlike their competitors so probably the quality is better. In addition, at the same price I got a fuel filter and candles. The product arrived within 2 business days, the contents of the box matched what was on the auction, and the quality of the carburetor was good.
Review translated automatically
Reliable opinion
I bought parts from several online shops in Poland for motorcycle MZ TS150 which bought in Ireland and currently restoring. It would have been easier to buy all parts from one shop, but not all required were available in one shop. Motorcycle is manufactured back in 1980 so I decided to fit some new parts including carburetor. It'll take some time to have fully assembled but I believe that I'll have no issues with parts.
Review translated automatically
Reliable opinion
WSK 125 carburetor I have connected to the spigot with a sleeve but unfortunately the carburetor has too small a hole than the series there were a few problems but I have already dealt with it FOR THOSE HAVING PROBLEMS WITH ADJUSTMENT BECAUSE I KNOW THAT THE MZ has such a problem with the carburetor that it goes nice up to half throttle and then makes a buzz and goes out You have to drill or insert a larger nozzle, because the org is small like in a mosquito but overall it runs great
Review translated automatically
Reliable opinion
It's cheap, quality is average, but for the price it flashes. If you do not require it to be a one in 10 years purchase, but something that is expected to withstand the conquest of the review and the first encounter with another hard part after which it will break. This I think can be recommended. ^^ A good option for inexpensive restoration of equipment that is expected to stand more as an ornament than if used. :)
Review translated automatically
Reliable opinion
Unfortunately, the frame is made very poorly, due to carelessly cast material at the edge, the license plate does not fit and it is impossible to close the latches. It is better to spend a few zlotys more for a better quality product that will have the correct dimensions. Despite the not too bad aesthetics, I advise against the product, it does not serve its purpose.
Review translated automatically
Reliable opinion
Hello. Adapted to a MZ TS 125 by filing the intake pipe a bit and lengthening the throttle cable travel. In addition, I found the best setting at the 1st notch of the nozzle needle. In conclusion, installation took longer than expected, but the bike runs very well. Best regards.
Review translated automatically
Reliable opinion
carburetor I bought for mz ts 150 , there is no way to fit it to this motorcycle , the diameter of the throat on the crucible does not fit , it is too small by 1 mm, moreover on the nozzle which is in this carburetor motorcycle works only at low speed, the nozzle is too small
Review translated automatically
Reliable opinion
Product ok, no major philosophy here, plastic clearance sensor. The original one was probably made of vinyl and broke off for me when removing, plastic is more durable, more flexible, it may serve. At this point it looks ok :) although perfect is not.
Review translated automatically
Reliable opinion
MZ ETZ 150 1990R, Carburetor 24N2 purchased from GMOTO is, in my opinion, currently the best replacement you can get for MZ'tka, it is solidly made, sensitive to adjustment and most importantly: ready to install thanks to the included accessories,
Review translated automatically
Reliable opinion
Frame very cool massive with a cool composing company logo unfortunately I did not use the purchased item because my board is smaller than I anticipated ? but the frame itself I highly recommend as I will measure the size of the board I will order another one like it
Review translated automatically
Reliable opinion
The element is made of good quality plastic, allows for repeated mounting and dismounting. The number and size of the mounting holes allows you to conveniently adjust the mounting of the element. Shape and aesthetics of workmanship at a really good level
Review translated automatically
Reliable opinion
License plate frame very solidly and aesthetically made, the size of the plate perfectly matches the size of the license plate, the mounting holes of the frame even fit into any bracket that are found at the motorcycle.
Review translated automatically
Reliable opinion
The cover gave a perfect fit to the rest of the drivetrain housing. The material seems to be solid and durable. Also, the price of the item is surprising in relation to the rapid storm of price increases. Greetings
Review translated automatically
Reliable opinion
Simson s51 - The turn signal is ok, it is not like the original, but it is not bad. You can see the differences with the original, including the plastic, which reeks of Chinese. Other than that, I have no objections, the direction works elegantly.
Review translated automatically
Reliable opinion
Hello I buy willingly at Gmoto.pl because they always have the parts needed for the simson I can agree on a discount, with the shipping of damaged parts is also no problem, parts so good and aesthetically made. Greetings and recommend.
Review translated automatically
Reliable opinion
Simson S51 E/4. A poorer and cheaper version of the S51 E in terms of electrical system, identical to the S51 N model. It had a 4-speed transmission. Production ended in 1988. Assembly mileage very easy.
Review translated automatically
Reliable opinion
The turn signals came to me in good condition but unfortunately I sent back due to the fact that the turn signals came on plastic mounts. The photo is not consistent with the delivered product. This was the case with mine
Review translated automatically
Reliable opinion
Gasket after installation ok, but after contact with gasoline increased its size. I needed to leave quickly and trimmed on the outside. It did not do much, had to be sent back for complaint. My fault.
Review translated automatically
Reliable opinion
It fits, but you need to replace the counter drive with the bracket from mz ETZ 150 together with the cable. The original MZ TS 150 drive from the bagelite cover is too short. after replacing the other parts, the meter works fine.
Review translated automatically
Reliable opinion
Honda St 1300 126 hp 80k hp 2002r , I bought the motorcycle in the commission and there standard commission frame, a little diso-polo with such a ride that's why the frame with the inscription HONDA will perfectly match the new machine ;)
Review translated automatically
Reliable opinion
MZ ta 150 sometimes lack of charging in the motorcycle through a defective part after installation of parts from gmoto motorcycle performs exemplarily part fits perfectly installation very easy I highly recommend.
Review translated automatically
Reliable opinion
I have ordered this part as a spare part for "emergencies" and will keep it in stock, just like the other carburetor parts. The quality is the same as the original part.
Review translated automatically
Reliable opinion
I have ordered this part as a spare part for "emergencies" and will keep it in stock, just like the other carburetor parts. The quality makes a good impression.
Review translated automatically
Reliable opinion
It works properly but, unfortunately, the holes do not match the original mount and the sub-base is too large, it was not without reaming and grinding the base of the regulator.
Review translated automatically
Reliable opinion
I have 2 old oilers reliable equipment frames fit like a glove I bought 2 pieces well fitted to the dimensions of the board simple to use good material highly recommend
Review translated automatically
Reliable opinion
It worked fine the first two times I started it. Third time blew the fuse and voltage regulator. Then put on the old one that still worked.
Review translated automatically
Reliable opinion
Romet scmb 125, I bought a frame for the reg plate.Appearance , size, quality, price - very good. I recommend! Delivery prompt and well packaged.
Review translated automatically
Reliable opinion
What to write. A lot of screw cutouts to fit and screw centrally in each vehicle. Also in a Chinese electric. Fits like a glove.
Review translated automatically
Reliable opinion
Benelli TNT 125 quick and easy installation for everyone. Shipment ordered for parcel machine shipped quickly. I recommend this product to everyone as well as the store.
Review translated automatically
Reliable opinion
This is not the first time I have ordered from Gmoto yet I have not been disappointed shipment always fast on time products also as described I recommend
Review translated automatically
Reliable opinion