Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
OSA M50 175
Manufacturer
Price
Sort
Options +2 
from 3
Browse by manufacturer
Products reviews
I own an '84 wsk 175 kobuz . i have owned it for a year . it has undergone a so called small overhaul(electrical ignition ) you can say polishing. However, it had a problem with firing up and getting into high revs. Now the motorcycle starts from the first one, no matter if it has been standing for a week or is warm, it works in the full speed range. You can safely say that it runs out from under the butt. However, the gasser had one defect, namely the valve closing the fuel supply after pressing the lever flooding the float chamber hung up and pissed fuel through the hole at the top of the chamber. Replacement of the valve for the original Pegasus from the era helped.Otherwise, the product is worth recommending. It helped to save the good name of Swidnica vehicles.
Review translated automatically
Reliable opinion
Warm welcome. WSK B1 1969.The carburetor fits well with the rest of the motorcycle so there was no problem with the installation as well. The cable fits well. Tight carburetor can be adjusted well, set the right dose of fuel and air. The appearance is also good resembles a carburetor from the era and what is important is that the parts from the old one from the era fit the new one so you can do a bit of fiddling. I recommend and greetings. Krzysztof
Review translated automatically
Reliable opinion
Greetings. I'm currently sitting so amateurishly on restoring the splendor of two 1969 WSK B1 motorcycles and a WSK Hunchback. In one and the other case I used the same pipes of wires, which aesthetically cool to fit the whole motorcycle. They fit in the assembly with the size of the wires, which is important if they are also to do a good job of insulating against, for example, muddy water. . I recommend
Review translated automatically
Reliable opinion
Jawa 50 ogar 200. i ordered a clutch cable clip from gmoto.pl store. The part fits perfectly and the clutch works as it should. Fast shipping. I recommend gmoto.pl store. I order parts for the second time in a row and always get what I need without the slightest problems. This is the only store where I buy new parts for my moped.
Review translated automatically
Reliable opinion
WSK from 1969, the so-called two-frame. The carburetor, first of all, matches the rest of the parts from the era, goes well with the rest of the engine, can be adjusted well, listens to me ;) it is also a solidly made carburetor does not leak and you need really great skills to break it down. I recommend it
Review translated automatically
Reliable opinion
The lever handle is aesthetically pleasing, unfortunately the fit is poor as can be seen in the attached photo ,another downside is that it does not have screws for the claws and attaching to the handlebars. The handle also does not have the hole phase of the screw fixing to the steering wheel so that the original screws do not hide
Review translated automatically
Reliable opinion
Greetings. I apply the wedge to the shaft of the engine WSK 1969 year b1, the so-called two frame. The product fits well runs well, as everything else set well it does not break off and if it breaks off it means that the settings to be improved. I recommend and greetings
Review translated automatically
Reliable opinion
Hi. The lamp will be fitted to a 1963 WFM Osa M52 motorcycle photo 1. Photos 2 and 3 show the described product purchased a year ago. The product meets my expectations. Only it would be possible to put the connection connectors. Greetings
Review translated automatically
Reliable opinion
Greetings. I used the hitches on a WSK 1969 year b1, the so-called two-frame. They fit well, fit the motorcycle and the lines, hold well, aesthetics are also good so what more to want. I recommend and greetings
Review translated automatically
Reliable opinion
Warm welcome. WSK B1 from 1969. The pipes are made of good material, they insulate well, first of all from water, tightly concrete hold, the appearance also have a nice so oki. I recommend and greetings. Krzysztof
Review translated automatically
Reliable opinion
Thread reduction used to repair the Romet head, fits most of the communist vehicles, it is easy to repair the damaged head yourself, all you need is a drill and a threader of the right size.
Review translated automatically
Reliable opinion
Carburetor very good quality, consistent with the original and most importantly the engine runs evenly on it. A good alternative to the original carburetors with which there is a problem even after regeneration.
Review translated automatically
Reliable opinion
The wrench may be minimally too long, although it depends on what motorcycle you use it for. Overall I am satisfied. In the photo SHL M11, for Romet Ogara 205 perfect.
Review translated automatically
Reliable opinion
WSK 125 B1 Pipe like the original quality of rubber used at a high level very nicely processed just install and enjoy the product highly recommend
Review translated automatically
Reliable opinion
WSK 125 B3 1972 carburetor perfectly reproduced compared to the original no casting errors motorcycle runs evenly and revs up
Review translated automatically
Reliable opinion
I own a Romet Ogar 200 motorcycle and ordered a brake clutch cable clip and it came practically on the 2nd day. I am very satisfied with this purchase.
Review translated automatically
Reliable opinion
WSK 125 1980r The paint finish is quite durable. The diameter under the steering wheel is consistent with the original. However, the lever stroke range should be larger.
Review translated automatically
Reliable opinion
WSK 125 1980. Material and aesthetics at a high level. Installation without any problems. Pipe fits perfectly, performs its function and looks good.
Review translated automatically
Reliable opinion
WSK 125 Wedge very well fitted not too big not too small. The wedge is hard and does not wear or break. I recommend my opinion is 10/10
Review translated automatically
Reliable opinion
The hitch dimensionally made exemplary. Fits perfectly both in the handle and in the holes of the steering wheel. The coating is quite durable. Installation is trouble-free.
Review translated automatically
Reliable opinion
Wsk M06B3 Wedge very good quality and with the right dimensions Does not differ from the original and fulfills its role in 100%
Review translated automatically
Reliable opinion
WSK 125 1980. Material as well as paint finish quite durable. Easy to install, but the stroke of the handle itself is smaller than the original.
Review translated automatically
Reliable opinion
WSK 125 B1 1969. Hitch made very carefully and aesthetically very good galvanic coating I highly RECOMMEND
Review translated automatically
Reliable opinion
GOOD QUALITY . HANDY ITEM . VISUALLY ALSO OK . MATERIAL FROM WHICH IT WAS MADE SEEMS
Review translated automatically
Reliable opinion
The heater works without the board ,good speed control but the workmanship and material quality could be better.
Review translated automatically
Reliable opinion
This is the second time I used such a reduction. The first time as well as the second time it fit perfectly. I recommend!!!
Review translated automatically
Reliable opinion
I own a Junak M10. I decided to buy a new PEGAZ carburetor, because the old carburetors are hard to adjust due to their age. The description includes the information , "fits JUNAKA ". The price is affordable, visually nothing to complain about, spacing and fit good. Unfortunately, the carburetor does not respond to slow speed adjustment, adjusting the throttle or needle does not change much. The carburetor funnels fuel into the cylinder in excessive amounts, black smoke from the exhaust pipe and the smell of fuel, response to the gas is uneven The carburetor is not recommended. The plug, filter from the kit are OK.
Review translated automatically
Reliable opinion
Of course, the goods as much as possible to fit a motorcycle which is a WSK 125. The goods in the first term I received damaged (the hole for the cable was missing), but after filing a complaint, the staff ensured that they would send the goods complete, which is a big plus on their part ( in the second term the goods arrived complete and very quickly). I have no objection to discourage the purchase of this merchandise, so I recommend it, because in case of failure of the rope it saves and helps to get home efficiently.
Review translated automatically
Reliable opinion
Moped peda but made in China 2007 year 50 capacity. The product is too weak it let go after 30 min of riding. The hole for the cable was too small I had to enlarge and besides, the broken end of the cable will always be flared and with a larger diameter so you will not do it quickly on the street. I recommend buying a new cable and not playing with replacements. Replacing the cable will do in an hour if you have never done it and the cost is 20 - 30 zl. In the picture it is made of brass and they sent a different one.
Review translated automatically
Reliable opinion
My comment will be the same for almost 10 parts (and that's not the end), because each of them helps me to put back on my childhood dream, my father's WSK motorcycle from the old days, neglected by time :) As for the quality, it's what I expected, which is great, service too, shipping also at a high level. This is the first time I used GMOTO but certainly not the last, because I am very positively surprised. I heartily recommend and will definitely come back for more :)
Review translated automatically
Reliable opinion
The light switch surprised me with the quality of workmanship while the center (switch) does not stand out in any way, the switch housing itself makes the best impression, it is not some thin sheet that bends under your fingers. As far as I am concerned I would buy this interrupter again.
Review translated automatically
Reliable opinion
WSK 125 carburetor + cone filter. I could not come to terms with adjusting the old carburetor. The plug was still black. The motorcycle was very " smoky ". After putting the new carburetor on and firing it up, I was finally able to adjust the mixture composition. Nothing tastes like coffee with milk or rather the sight of such a color on the candle after it was removed from the cylinder - finally. I recommend this purchase.
Review translated automatically
Reliable opinion
All well made, unfortunately I did not read carefully and it is not a pipe for a candle but a pipe for the installation at the ignition (I do not know how else to explain it) in any case, I bought with the idea that it would be a large pipe for a candle and it came a tiny one. Opinion obviously positive because the workmanship is very good and the mistake was on my side .
Review translated automatically
Reliable opinion
I bought parts to restore my WFM 125 1956 - unfortunately originally there was a G16 carburetor but I could not get one I bought a G20 and that meant that I had to make an adapter to fit the carburetor to the cylinder . Everything worked out the engine smokes . Express delivery , contact super . I recommend
Review translated automatically
Reliable opinion
Bushings very solid to rometa kadet fit I bought more as if they died. I recommend the purchase and the store. I am surprised by the honesty of the store. I made an order then a second basket and they returned the cash and made in one order. The second situation with the lamp for rometa cheapened they removed the basket and made with a lower price. I recommend the store
Review translated automatically
Reliable opinion
SHL 175 M11 1967. The price for the carburetor is very affordable. And what is better, the motorcycle works on this replacement really sensational and did not require major adjustments. Made very nicely. Like the original. And for the money. Honestly exceeded my expectations. Installation without any problems. Nothing to complain about. I recommend.
Review translated automatically
Reliable opinion
The carburetor looks good, neat but you can see that it is not the same quality as the original. There are lint in many places that have to be removed by hand. To install the line you need to remove the firing pin and this is an art. The firing pin mounting plate was poorly made, thin and bends. We will see how it will perform.
Review translated automatically
Reliable opinion
The sleeve is nowhere near the sleeves coming out in the wsk. In a motorcycle wsk came out with a minimum diameter fi 10mm not threaded and in this case we have a roller furniture nut. This is the first time such a thing has happened to me since I have been shopping in this company. Complain nothing because it is not worth the trouble. Too little value.
Review translated automatically
Reliable opinion
I purchased a switch for a 1977 WSK 125 so-called humpback. It fits, works properly. Only the quality of surface preparation for the application of chrome leaves to be desired. There are visible scratches on the chrome surface of the switch. These are not scratches on the chrome surface so they are visible under the light.
Review translated automatically
Reliable opinion
I own several motorcycles to which this carburetor fits mn shl 175W, the carburetor does not work in any motorcycle is badly fitted inside. The insert of the carburetor, the one where the slow speed nozzle is, should be tight in the body of the carburetor, and there is a play of about 1 mm, the carburetor has no right to work.
Review translated automatically
Reliable opinion