Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Rex Escape 25 2T 2003
Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
I recommend this carburetor very good quality workmanship Fits under serial parts and under tuning parts should be in it only still replacement nozzles works well even in heavy terrain
Review translated automatically
Reliable opinion
I recommend this carburetor. I put on the Derbi everything perfectly for such a price. A very big advantage is the set of nozzles that comes in the box and you can adjust the carburetor.
Review translated automatically
Reliable opinion
Pipe not bad but fragile fully shielded candle clamp only on the thread so the thread is destroyed price adekfatna to quality
Review translated automatically
Reliable opinion
As for such a low price it is worth buying fits perfectly to Romet ogar 205 so far works well. recommend.
Review translated automatically
Reliable opinion
Unexpectedly, this carburetor surprised me with its price/quality ratio. I expected a "lousy" product for this price, but as it turned out later it is simply great. My colleague also has this carburetor (Yamaha Aerox 70cc) and I (Aerox 70cc), which factory had a carburetor with a 12mm throttle and were not very eager to start nimbly, after installing a 21mm carburetor from Gmoto, which that one was very easy because the fit of the parts was very good, the motorcycle suddenly gained power and a lot of acceleration. A colleague has had this carburetor for about 3 months and nothing has broken down yet. I recommend this carburetor as much as possible, it is not worth overpaying for much more expensive carburetors, as this one is definitely made perfectly.
Review translated automatically
Reliable opinion
Ignition pipe bought for a WSK 125 motorcycle, at first glance it looks perfect, a very important advantage is the covers to protect against moisture or driving in the rain. Why aesthetics "could be better", because the workmanship is good, but not refined. The important thing is that it works as it should, and I am also very satisfied with the service of the GMoto store, also recommend.
Review translated automatically
Reliable opinion
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
Reliable opinion
Zipp quantum gt5 2008r. The carburetor came the wrong one (I got it from simson), it's hard I needed it fast I didn't have time to send it back, after reworking the mount I put on the one I got it turned out that the cable mount is so delicate that the spring from the kit after putting it on ripped out the mount
Review translated automatically
Reliable opinion
I own a 2008 Yamaha TZR 50 brand motorcycle the installation of the product was fabulously easy no effort required the product fulfilled its task 100% if someone is looking for an ignition pipe I recommend this model, because it is an excellent quality product. I heartily recommend and greetings.
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
I ordered the carburetor for my 2009 Beta RR50 motorcycle, the fit of the carburetor to my bike is perfect. The carburetor worth the price even I would give more, the workmanship is good, and as for the aesthetics I would improve a little, the carburetor really performs great.
Review translated automatically
Reliable opinion
I warmly recommend gmoto.pl store is here a lot of parts for motorcycles and mopeds parts as described and also fit motorcycles fast shipping and also fast turnaround time parts made of good solid materials.
Review translated automatically
Reliable opinion
The pipe checks out, spark ok, no puncture, especially since the vehicle lacks an ignition switch and pulling the pipe takes care of it. There were no kicks (although I know that this should not be done, but well. who is blameless let him be the first. ?
Review translated automatically
Reliable opinion
The carburetor comes very complete and with spare gums that facilitate the carburetion, I have not been able to get it to work but I do not know if it is a problem of the carburetor or the cylinder I have on. The purchase is reliable and the part seems to be of quality.
Review translated automatically
Reliable opinion
Ogar 200 This pipe the only pipe maker will really make you happy. Do you have a problem with the disappearing spark? try to replace the pipe and you will find that the spark will not escape anywhere ! quality good everything fits robukt made aesthetically and nicely.
Review translated automatically
Reliable opinion
I bought this product "in stock" , however, it looks very good. As soon as I mount it somewhere I will write what and how, but I can already see that it will be good as with the previous pipe only that straight mounted to Yamaha Majesty 125 1998 vintage.
Review translated automatically
Reliable opinion
Hello, I own two 1985 M-2 motorcycles and one 1987 M-3. I am currently in the process of rebuilding each in turn. The parts I bought from Gmoto met my expectations. They were of good quality and fit without any problems.
Review translated automatically
Reliable opinion
at this gasser there is a hose from the overflow immediately after unpacking was cracked one of the plastic holding the hose hopelessly disintegrates in your hands the rest of the gasser ok except that sometimes it leaks something is jammed inside
Review translated automatically
Reliable opinion
A very good replacement under a serial cylinder, or even a 70cc. It is well made and very easy to fit, the only downside is the lack of a fuel drain on the bottom of the carburetor, but overall it is well made and highly recommended
Review translated automatically
Reliable opinion
Motorcycle 50 ccm,year of production 1986 it is known not the first youth .When starting sometimes the spark disappeared.So it had to be replaced with a new one and I heard the first sounds of the long unheard of engine of my youth
Review translated automatically
Reliable opinion
The belt is made very solidly, we get a very good belt for very little money which perfectly fits scooters with minarelli engine. After tearing off the old belt and putting on the new one, you feel a significant improvement in performance.
Review translated automatically
Reliable opinion
Suzuki TS 50(80) 1991r, 13000km. The carburetor came with a damaged plastic spigot probably from the overflow (not important). After installation, the carburetor immediately works, a minor adjustment of the composition of the mixture and there. recommend the product.
Review translated automatically
Reliable opinion
I have been shopping with this seller for a long time and each time I am very satisfied with the quality, speed and contact with the seller. I have already recommended several offers to my friends, who are also very satisfied.
Review translated automatically
Reliable opinion
I INSTALLED THE CARBURETOR WITHOUT ANY PROBLEMS IN APRILA CLASSIC 80CM3. Carburetor made entirely of aluminum alloy, very good quality. Well tuned with this capacity. recommend to others interested.
Review translated automatically
Reliable opinion
Ogar 205 pon 50 cm year 1987.Product of good quality, the shape resembles the original which is a plus, the way of assembly is trivially simple.Product 100% consistent with the seller's description.Price revelation.I recommend
Review translated automatically
Reliable opinion
Carburetor idelanie fits my scooter (yamaha neos). After proper adjustment, more power is immediately perceptible. Made very well, very similar to the original dellorto gasifier.
Review translated automatically
Reliable opinion
Pipe for its price is I think a very good product qualitatively and aesthetically, there is no need to look for other ignition pipes for 20/30 PLN pipe price 5zł is really impressive :) I recommend
Review translated automatically
Reliable opinion
Firm fit, perfect and as expected. Unfortunately, a part broke off right at the beginning because I was careless. But it works as it should. Can't complain.
Review translated automatically
Reliable opinion
I highly recommend, fast shipping and great contact with Gmoto.pl service. You can see that the store respects buyers and there is no problem to make contact. Greetings and heartily recommend.
Review translated automatically
Reliable opinion
Aprilia RS 50 2001 on the faucet does not go it is not adjustable no free revs it is hard for it to rev up for such a price it is a very unprofitable carburetor.
Review translated automatically
Reliable opinion
Super alternative at a super price. No problems with adjustment both with am6 as simson and WSK . In addition we get a set of nozzles, for this money the perfect alternative.
Review translated automatically
Reliable opinion
Jawa 50 mustang 1975. pipe is solid, nicely screws on the cable.As one of the many has rubber bands that protect the cable so that it does not snow and generally against moisture.I recommend
Review translated automatically
Reliable opinion
Romet Ogar 205 50ccm, 1987. Plastic of only good quality, although the price is low. In general, the product fits seamlessly and serves its purpose. Final: recommend.
Review translated automatically
Reliable opinion
Very cool pipe, it looks like this ngk odnfitmy, But it works the same, the candles hold securely and it takes more force to take it off the candle, highly recommended!
Review translated automatically
Reliable opinion
I bought the carburetor, the delivery was fast and hassle-free. The carburetor is really well made and I recommend it wholeheartedly. Fits perfectly, works flawlessly, recommend.
Review translated automatically
Reliable opinion
Romet Ogar 205 - Good pipe for a good price. Assembly as most. Holds the candle well only the rubber bands could have been done better but for the price I recommend.
Review translated automatically
Reliable opinion
I bought the carburetor for a simson and I think it is very good in this type of equipment goes better and collects better oprocznik I received a stylish sticker
Review translated automatically
Reliable opinion
Romet Komar Satisfied 100% everything fits as described . Express delivery less than 24 hours . Full information about the shipment . I give 10/10
Review translated automatically
Reliable opinion
Product admittedly Chinese, but not badly made at all. I personally don't use it but it would work for sure. There is no better carburetor at this price.
Review translated automatically
Reliable opinion
WFM M06,S34 125cm,1964 the pipe is too short, rests on the head fins and thus tends to dislodge from the spark plug.
Review translated automatically
Reliable opinion