Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Romet Arkus RS 50 - Page 2
Options +6 
Browse by manufacturer
Products reviews
Junak 901 year 2017 capacity 49 CC I bought new. It had a lock on the revs and that indeed when it came to me this module quietly into the frame fit. Improved my motorcycle performance screws into higher revs. The quality of workmanship is very good module is larger than blocked but there is no problem with installation in Junak 901
Review translated automatically
Reliable opinion
I have a motorcycle Junak 905.Its fault was that it does not accelerate in 4th gear, so I decided to buy a 12 tooth sprocket, because I have 13 as standard, so I ordered it.Once it arrived I immediately went to install it simply fit as standard. Now my junak accelerates in 4th gear.
Review translated automatically
Reliable opinion
I ordered a crankcase for a Junak 902 - although it is listed as "fits to" on the item page, unfortunately it is not a perfect fit. Unlike the original, it does not have an input for the shift sensor cable.
Review translated automatically
Reliable opinion
I own a motorcycle Romet Ogar 200.The fuel filter performs very well, it does not leak or let through the "garbage" that may be in the fuel tank. It fully fulfills its role.
Review translated automatically
Reliable opinion
The screw does not differ from the original and was sold with the washer included where else you have to buy the washer separately I recommend the product
Review translated automatically
Reliable opinion
The module works very well with Loncin 125 and works flawlessly immediately feel more power. Very fast installation. Recommended.
Review translated automatically
Reliable opinion
I recommend buying this universal fuel filter because it is well made and easy to install at this price it is probably the best fuel filter
Review translated automatically
Reliable opinion
Shaft seal18.9x30x5 4T 139 fmb very well made with attention to detail fits without any problem I recommend to everyone
Review translated automatically
Reliable opinion
Front sprocket 428 12 teeth very well made with attention to detail fits without any problem I recommend to everyone
Review translated automatically
Reliable opinion
The filter is good and there is nothing to complain about . It fulfills its role in Benzer Texsas 50 . I recommend !
Review translated automatically
Reliable opinion
Hello, I purchased an unlocked module for Barton fighter 50 and honestly I recommend everyone to buy this module on this site. After installation which is literally simple, the motorcycle is unrecognizable. It picks up better, it is much so called ripper and the performance is much better. I measured the maximum speed after the replacement and on the straight 95km/h passed, and I think it would have been able to do a little more, but unfortunately the straight ended. I sincerely recommend this purchase.
Review translated automatically
Reliable opinion
The radiator performs very well and you can feel the difference on hot days when engine cooling is a little worse. The kit fit perfectly and there was no problem with installation. In my case, you had to tighten those nuts at the oil outflow and inflow because they were poorly tightened. Likewise, you had to buy tourniquets because the original ones did not lapped very tightly u could see the oil leak. These are penny issues and they fixed the problem.
Review translated automatically
Reliable opinion
This is the first time I've ordered a piston from this site, and I have to say that I'm clearly not disappointed. The piston is in very good condition, there's no trace of scratches or anything else, plus everything is very well packaged, nothing to say on that score, and the rings fit superbly, they're not damaged or broken at all, nothing at all. I'm going to put this on my Masai scrambler 50cc with a 70cc cylinder kit.
Review translated automatically
Reliable opinion
I have a moped brand Router ws 50 I highly recommend the purchase of this module, my moped began to accelerate much faster and the top speed also increased, on the GPS without the module v-max was about 65kmh and with the module 80. The module is made of good plastic, it is larger than the original but still fits very well, I have it for about 2 weeks now and I really recommend the purchase of this product.
Review translated automatically
Reliable opinion
My motorcycle is a Chopper kingway Superbyke XT 50Q-00 I bought and buy parts on Gmoto.pl I bought an unlocked module which unlocked my motorcycle which gave more power and better acceleration finally my engine is working as it should,I am satisfied with the quality of the product its delivery and replacement of parts the company Gmoto.pl in aroused great trust in me thank you and RECOMMEND you
Review translated automatically
Reliable opinion
Hi!!I am the owner of a quad 150 atv for which I decided to purchase the above spark plug.The product is doing a great job,I have no reservations about it,you can really use it for a long time .The plug fits perfectly in the hole to the combustion chamber and gets the right temperature during the spark which allows you to keep the combustion chamber very clean.
Review translated automatically
Reliable opinion
Ogar 900, the whole fits perfectly. Used in place of the burned out only the charging coil of the CDI module, after a slight modification of the winding connections and changing the connectors. By the way - in this stator with one coil providing battery charging, it is necessary to periodically recharge the battery!!! After the replacement so far the scooter starts without any problems.
Review translated automatically
Reliable opinion
The module is a little larger than the standard one, but it fits and can be easily mounted. Electronics flooded with gel, which is a little sticky and will probably collect all sorts of flecks, but you can not see it, so all in all not important ☺️. After installation, the motorcycle gained a little power, collects better at the lights, which is what I wanted. For the price I recommend. Zumico GR 200
Review translated automatically
Reliable opinion
The product is solidly made, it is a little larger than the original module, however, into the frame of Zippa Pro 50 fits. The bike got a little kick after the change, but there is not a huge difference. The only disadvantage for me is the material with which the module is flooded, it is sticky, so after some time it will collect debris, dust, etc.
Review translated automatically
Reliable opinion
Very simple ordering mechanism. This is the second time I have ordered this oil seal. The quality is convincing. The price/performance ratio is very good. I can only recommend this item. Intended use: Left crankshaft oil seal. Motorcycle: Ohvale GP-2 190 cc, Mini GP bike, year 2024
Review translated automatically
Reliable opinion
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
Reliable opinion
Fits perfectly into my Kinroad Chopper Xt50q. V max unchanged (I close the alarm clock), but much more powerful (it goes over hills it had trouble with before without problems). Replacement took me about 15 minutes, and only because of the strong tightening of one of the screws. In my motorcycle this module is located under the main seat.
Review translated automatically
Reliable opinion
Unfortunately I can not recommend this filter, because I got it with a defect, on the weld there was a very small invisible hole through which gasoline poured. I put the motorcycle together poured gasoline and here it dripped, and unfortunately it gave me a heap of work because I had to take everything back apart. But I'm not going to make an issue about a few zlotys.
Review translated automatically
Reliable opinion
I have a Zipp pro 50cc motorcycle from 2012 I ordered a starter shaft sealer and Motul 10w-40 semi-synthetic oil as for the sealer is very well made and thanks to this it can be installed quickly and without problems, oil clean and fragrant so you can confidently pour oil into the engine and enjoy the ride.
Review translated automatically
Reliable opinion
Zipp vz 50.2016.Previous vehicle kingway king, rode it 75,000km. The puller works well in its purpose. The screw could be sharpened which would not cause damage to the thread when removing the magnet wheel,but skillful application does not cause any problems.Regards Daniel.
Review translated automatically
Reliable opinion
It came what I wanted, I thought I would get a piece of Chinese plastic that I would put in my motorcycle, but here I was pleasantly surprised. Exquisite workmanship, I put it in right away without the slightest problems which is a testament to the excellent fit. If anyone is thinking about buying it, I recommend it WORTH IT!
Review translated automatically
Reliable opinion
Good aluminum quality, piston rings are very easy to install and the piston only needs minimal break-in as it already fits very well. Disadvantage: Aluminum is not as durable as a steel piston, but the cylinder is not damaged as much in the event of piston jamming
Review translated automatically
Reliable opinion
Mega cool puller for 20 days I could not pull off the magnet wheel in the motorcycle KXD 125 I unscrewed the screw and then turned the puller and the wheel came off by itself there was no need to give so much pressure puller for the magnet wheel I recommend 10 out of 10 very durable cool design. I recommend :D
Review translated automatically
Reliable opinion
I run a repair store for single-track vehicles and sometimes I use Gmoto.pl, I am satisfied with the products offered in Gmoto.pl store, I recommend other users of single-track vehicles, parts offered by Gmoto are suitable for repairing single-track vehicles, the price is adequate to the quality.I recommend
Review translated automatically
Reliable opinion
Runs fine, pulls really well. However, I think it shakes a little when you get up to 8000 rpm, so I do not do that. I have geared the moped on the chain, so the rpm comes down. Coming down, but it can easily pull an even higher gearing if I want to go faster. Now driving approx. 85kmt
Review translated automatically
Reliable opinion
Barton FR 50 2014. The pawl really does its job very well, the gears do not fall out or jump. the product is made very aesthetically pleasing and is very easy to install. I am very satisfied with this purchase, I recommend to other customers greetings warmly.
Review translated automatically
Reliable opinion
I would like to share my opinion on the module I had the original module in my motorcycle but I purchased from gmoto website unlocked Module is made, with very good materials after inserting into the motorcycle this module immediately came out better on the revs.
Review translated automatically
Reliable opinion
good thing, after replacing from factory to unlocked you can see a significant difference. Good quality workmanship comparing with the factory one can see a significant difference on the plus side . Plug stiff, fits perfectly into ym 50-8b. Zero problems with installation. I recommend.
Review translated automatically
Reliable opinion
This kit is very useful for overhauling FMB139 and related engines . Finally I have new screws, and do not have to look for anything . All that were scratched or machined I replaced with new ones . Now it is completely different . :D
Review translated automatically
Reliable opinion
Simple ordering process. The parts at a really fair price. Shipping costs fully ok. The parts exactly according to description and photos. I am very satisfied, many thanks for everything. Can only recommend the supplier.
Review translated automatically
Reliable opinion
I own a 2020 KDX Avenger 125cc quad and had a major problem with the ignition. The purchased spark igniter needed to be reworked, because the input did not fit on the pins. But it was done successfully, the quad runs like gold. I recommend the product.
Review translated automatically
Reliable opinion
110ccm capacity quad from bemigermany with TZH152FMH engine (top starter) nothing in particular different from other Chinese 110 engines. The filter fits, does its job as it should, good product.
Review translated automatically
Reliable opinion
Product as described. Bought for a Chinese quad 125.Quad after installation became more powerful. Easy installation. Really worth it for such a price. Much better construction than from my old Chinese module. Worth it and recommend.
Review translated automatically
Reliable opinion
Barton Ranger 120CC, the bushing fits, of course. The oil bushing comes in a kpl. with a gasket-oring. I am very satisfied with the packaging of goods at Gmoto, I order a lot of small parts and not once was there a mistake :=)
Review translated automatically
Reliable opinion
The quality makes a very good impression. The look and fit are the same as the original part I replaced with it. Shipping was very fast, everything I ordered was securely packed.
Review translated automatically
Reliable opinion