Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Romet Motorynka 50
Manufacturer
Price
Sort
Options +3 
Podobne :
€6.94
Lowest price from 30 days before discount: €9.25
Romet intermediate wheel IIIB engine - 118057
from 8
Browse by manufacturer
Products reviews
Greetings. I have used the light switch - zinc in my two motorcycles: A '63 Junak m10 and a '66 SHL 175. This product works perfectly in both cases. To the eye it looks excellent, but what is important is also a product that is easy to install and works correctly in further exploration. I recommend, in my case it works without complaint . Regards
Review translated automatically
Reliable opinion
Greetings. WSK B1 from 1969 The faucet fits and I must say that it is made solidly and also looks quite well slightly imitates the style of bygone times. When you unscrew the cap the thread fits superbly to the tank. One thing that I modified is this longer tube I shortened because in my opinion it reaches too high. Regards and field. Krzysztof
Review translated automatically
Reliable opinion
The delux gasket is missing a lot, the holes do not fit perfectly for sure. i used maybe 3 from the kit so i do not know how the others fit. Float chamber gasket failed to fit because it did not fit at all. I was guided by the reviews but I see that these super reviews are probably for looks or for that 400zł voucher. P
Review translated automatically
Reliable opinion
Warm welcome. WSK B1 of 1969. I applied such a nut to the front brake cable rod. It is a little smaller than the one I have on the rear brake rod, although both on thread 6. It looks nice and at the same time serves its purpose. I recommend and greetings
Review translated automatically
Reliable opinion
The motorcycle got new plastic and all in all everything fits ok, the flap comes down hard from the glove box but I sanded it down and it's good. It would be nice to add to the set instead of rolgaz counter cap. The plug super sits better than the original I recommend.
Review translated automatically
Reliable opinion
Motorcycle M1 year of production 1980, the plastics fit perfectly, the installation went easily, only the glove compartment flap is a little different from the original after that you can not see much difference.
Review translated automatically
Reliable opinion
Romet Ogar 200 1988. The bumper rubber fits perfectly in its place, fulfills its function 100%. It is made very solid and also looks good.
Review translated automatically
Reliable opinion
Motorcycle M2.Workmanship of the fender good,plastic hard,strong,to the motorcycle fits very well,The only downside is the lack of a screw for the storage compartment in the kit.
Review translated automatically
Reliable opinion
Romet Ogar 200 r.prod 1986. the switch fits perfectly. It works as it should and looks ok, also recommend at my place it works perfectly.
Review translated automatically
Reliable opinion
Motorcycle. The fender is first class as well as the rest of the products I ordered, and the shipping was express. I sincerely recommend Gmoto company.
Review translated automatically
Reliable opinion
Romet Kadet 780 1988. Once again, the gaskets fit very well. We have a set for virtually the entire engine and accessories.
Review translated automatically
Reliable opinion
I recommend in good conscience fenders presents itself mega in my motorcycle I recommend Gmoto partsi good and aesthetic.
Review translated automatically
Reliable opinion
Good workmanship, just be warned it does not fit the carburetor from the ogar 200/jawa 50, but yes it is as much as possible I recommend.
Review translated automatically
Reliable opinion
Gaskets super, probably the best there are. Fits elegantly motorcycle does not leak and can stand at home.
Review translated automatically
Reliable opinion
Everything as in the original everything fits like a glove quality of materials very high. Fits both two mosquitoes
Review translated automatically
Reliable opinion
I own a 1985 Ogara 200 the rubber I used as a center foot rebounder fits perfectly. I recommend.
Review translated automatically
Reliable opinion
Romet Ogar 205 1987. One gasket unfortunately does not cover the whole elbow, you will have to use two.
Review translated automatically
Reliable opinion
All ok bolt very good quality as they fit romet kadet motorcycle recommend 100 %
Review translated automatically
Reliable opinion
Mz etz 250 material good and workmanship Great nice appearance, workmanship aesthetic. I recommend!!!
Review translated automatically
Reliable opinion
I purchased the kit because I needed a clutch-side lid gasket. The gasket turned out to be completely mismatched, even tragic, so much so that I used the old one. Gmoto should change the product because from what I gather this is not the first negative review of these gaskets. In another well-known wholesaler you can buy perfectly matched which means that you can make good gaskets. As for quality and aesthetics, I will not comment because the mere fit made it impossible to use the gasket
Review translated automatically
Reliable opinion
Romet Kadet, engine 023, a set of gaskets that is most worthwhile, a copper head gasket, a thick and solid carburetor/cylinder gasket and many other useful for this engine, it is not worth buying by the piece. Just remember that for these gaskets do not use any red silicones, etc. It is enough that we lubricate with lubricant and tighten evenly, and nothing will leak .
Review translated automatically
Reliable opinion
They seem to be better than the previous black-painted ones, those bent from the weight of the legs, while in my case the problem was that the outer diameter of these rods which gives rubber is 10 mm and not 12 as in the black, I had to press the footrest rubbers on hot glue and surprisingly holds so far.In addition, went in the primer and color to be sure.
Review translated automatically
Reliable opinion
The inside diameter is 23.9mm, not 25mm, making it physically impossible to push the gasket onto the 25mm diameter elbow and bolt the muffler to the elbow. I definitely didn't end up with a defective piece because all 4 "kits" I ordered have the wrong dimension. Please start measuring accurately with a caliper for these types of parts.
Review translated automatically
Reliable opinion
Romet Kadet, this paper can also be used as a gasket for a version of the elbow with a nut, just slide as much as you can into the muffler with the elbow on and cut the rest evenly, then to the diameter of the nut cut a round gasket that will enter the nut . Such a gasket works for me and the oil does not leak.
Review translated automatically
Reliable opinion
Bushings very solid to rometa kadet fit I bought more as if they died. I recommend the purchase and the store. I am surprised by the honesty of the store. I made an order then a second basket and they returned the cash and made in one order. The second situation with the lamp for rometa cheapened they removed the basket and made with a lower price. I recommend the store
Review translated automatically
Reliable opinion
The sleeve is nowhere near the sleeves coming out in the wsk. In a motorcycle wsk came out with a minimum diameter fi 10mm not threaded and in this case we have a roller furniture nut. This is the first time such a thing has happened to me since I have been shopping in this company. Complain nothing because it is not worth the trouble. Too little value.
Review translated automatically
Reliable opinion
Romet Ogar 205, well-made set, satisfactory quality and appearance, fits well in the hand, non-slip material is a pleasant alternative to the original plastic handles, increases safety. Installation requires force, but for that the rubber stiffly holds in place, no play.
Review translated automatically
Reliable opinion
Repairing Jawe 50 on gmoto you can count on, here you can buy everything you need, even every smallest detail such as brake bushings, etc. dealing with the overhaul of vintage mopeds or motorcycles there are parts that can not be repaired or is not worth it, and that is why gmoto is ok.
Review translated automatically
Reliable opinion
SHL M 11 The bushing has no dimensions, it is not suitable for anything. I do not understand why it is on offer if it does not fit? Hardly, it appears on many sites for various motorcycles and it is an exaggeration to put on the site Junak M10 M 07 where, after all, such a component in this motorcycle does not occur.
Review translated automatically
Reliable opinion
Romet Kadet. Before installing the gasket, I recommend sanding the surface of the faucet knob to get rid of pitting, because whatever the gasket is, fuel will escape through the pitting. If someone does not have mechanical sense, I recommend buying a complete faucet, which is a few zlotys more expensive.
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion
Metal fuel faucet is a solid and durable product that ensures reliability during refueling. Its metal construction guarantees resistance to mechanical damage and weather conditions. In addition, the aesthetic appearance can add style and elegance to the vehicle.
Review translated automatically
Reliable opinion
I purchased a set of screws for my Romet Pegasus. Unfortunately, but one screw does not fit. (From the head mount) It is simply too long. ;) Similarly, it also does not fit the Motorbike which has a head mount. Other than that, for the rear mounts fit perfectly! And there is a gicko of quality! ^^
Review translated automatically
Reliable opinion
Romet ogar 205, 50 cm³, 1987. The seals are made of a nice material, they are thick, well lapped and adhere well. The problem with leakage from under the clutch Deck is gone. One minus I received a gently bent muffler gasket, but other than that, I recommend heartily
Review translated automatically
Reliable opinion
I ordered a rear fender+ glove box cover for motorcycle And many other things. The quality is very good. But the biggest plus is very fast delivery, on the second day the package is already there. The price of the products is not high, and I got a 5% discount on purchases. I recommend!!!
Review translated automatically
Reliable opinion
I tested the gaskets so far only from the carburetor. The gaskets are thin and do not fit. The gasket from the chamber where the float is located is too big. The other one mounted at the head has decorated screw holes badly. My engine is a Deazamet 023.
Review translated automatically
Reliable opinion
Gaskets are definitely better than paper gaskets, the engine does not leak even without the use of silicone, and above all - without consequences you can remove several times, for example, the clutch cover for adjustment - and the gasket will still hold.
Review translated automatically
Reliable opinion
Hello, I own two 1985 M-2 motorcycles and one 1987 M-3. I am currently in the process of rebuilding each in turn. The parts I bought from Gmoto met my expectations. They were of good quality and fit without any problems.
Review translated automatically
Reliable opinion
Hello, I own two 1985 M-2 motorcycles and one 1987 M-3. I am currently in the process of rebuilding each in turn. The parts I bought from Gmoto met my expectations. They were of good quality and fit without any problems.
Review translated automatically
Reliable opinion
I purchased an o-ring for the faucet from an ogar 205. Unfortunately, it turned out that the o-ring is quite a bit too big and despite using force, I was not able to tighten the lower part of the faucet all the way. Fortunately, it is quite tight and nothing is leaking.
Review translated automatically
Reliable opinion