Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Romet Ogar 200
Options +3 
Browse by manufacturer
Products reviews
The fuel filter fits nicely into the fuel hose, gets in tightly, does not sweat or leak anything filter is resistant to any impacts caused by such as accidental collapse of the motorcycle well filters the fuel from filings and various dirt that may accidentally get into the tank such a fuel filter will easily last for a year. I like the fact that it is transparent and you can see whether the fuel is flowing to the gasser or not I highly recommend it.
Review translated automatically
Reliable opinion
Kawasaki EL252 1997. the filter is reusable, easy to unscrew, on the photos I attached you can see that there is also a gasket which can be replaced with a new one if necessary, a very positive surprise in such a price range, I recommend to everyone, the filter can be unscrewed through two wrenches #13, it fits perfectly on a 6mm hose :)
Review translated automatically
Reliable opinion
You have to be careful what you buy. I, unfortunately, threw away the cardboard box and receipt and do not want to wait for the processing of complaints and shipping time one way and the other does not interest me. The footer scratched even at delivery there was no way to check. Nevertheless, I will repair it or make a high-gloss stainless.
Review translated automatically
Reliable opinion
Romet Ogar 200 50cc 1987. Super filter installation went without a problem thanks to this store ogar got 2 lives I recommend Gmoto.pl store - solid work, solid product and excellent service. Ps. This is not the first and certainly not the last purchase on Gmoto Greetings!
Review translated automatically
Reliable opinion
Romet Komar 3 1975 Dezamet 023 engine The filter as I wanted, packaged originally looks very good and so will serve, the impression is made by the engraved name of the company and the Country.It is worth buying in all respects.you can disassemble clean clean twist and this is also the main plus.
Review translated automatically
Reliable opinion
Ogar 200 88' the kit fits very well , the set admittedly lacks a throttle for full reconditioning , but the problems with the carburetor are over . My carburetor now works like new and more importantly I no longer overflow from the float chamber.
Review translated automatically
Reliable opinion
My machine is a 1982 ROMET OGAR 205 with a capacity of 50cc. The filter fit very well, it fits perfectly with the frame of the motorcycle. The filter immediately after installation began to catch impurities from the tank. Goods as highly recommended.
Review translated automatically
Reliable opinion
At this price I expected cheap, shoddy mirrors however after unpacking the package I was pleasantly surprised. Quality of workmanship at a really high level No and on the motorcycle also looks great. With a clear conscience I recommend !
Review translated automatically
Reliable opinion
BICYCLE with motor drive on a gearbox from a combustion scooter 1:5 +gear 14 z remote and 64z receiving.T8F silent chain +gear with left thread,which allows free riding on the pedals,when the engine 2T(8500 RPM) is not running. CHEERS.
Review translated automatically
Reliable opinion
WSK 1969 year b1, the so-called two-frame. Junak m10 1963 and 1965 SHL 1966 and 1967 All these models have such bulbs. This product rarely burns out for me. The light gives good, installation oki so I recommend and greetings.
Review translated automatically
Reliable opinion
My machine is a 1982 ROMET OGAR 205 with a capacity of 50cc. Signal revelation, gives a slightly louder signal than the original so that everyone can hear it from a distance. The signal fits nicely to the frame of my ROMET.
Review translated automatically
Reliable opinion
I own a motorcycle Romet Ogar 200.The fuel filter performs very well, it does not leak or let through the "garbage" that may be in the fuel tank. It fully fulfills its role.
Review translated automatically
Reliable opinion
WSK 125 B3 1977. In the absence of the original signal - this one fits perfectly. It is smaller, but makes up for it with sound. Installation without problems - price and quality revelation.
Review translated automatically
Reliable opinion
Hello I have a moped brand chopper kingway 110ccm registered for 50ccm the installation of the filter went through without any major problems I recommend to anyone for dirty tanks :)
Review translated automatically
Reliable opinion
Hello. I own a 1973 mustang 50 jaw. I am doing a full restoration of this vehicle about 3 months. The parts purchased have greatly expedited the repair.
Review translated automatically
Reliable opinion
Romet Ogar 200 capacity 50cc year 1980 items that I buy on gmoto.pl are good fit well and I have no complaints about the parts.
Review translated automatically
Reliable opinion
I recommend buying this universal fuel filter because it is well made and easy to install at this price it is probably the best fuel filter
Review translated automatically
Reliable opinion
I sincerely recommend these mirrors very beautiful looking, everything as written, very good workmanship yet such a good price
Review translated automatically
Reliable opinion
Hello, mirrors very good quality, super made in truth, I did not expect this considering the low price. I recommend
Review translated automatically
Reliable opinion
The filter is great, very large, but does not take up much space, will last a long time, looks good and performs well. I recommend
Review translated automatically
Reliable opinion
Pipe not bad but fragile fully shielded candle clamp only on the thread so the thread is destroyed price adekfatna to quality
Review translated automatically
Reliable opinion
Tgb orion 125 engine gy6 year2002 mileage 22000. filter for gasoline ok can safely take next time I will buy it again
Review translated automatically
Reliable opinion
Shock absorbers beautifully made. They make an impression, even better after installation. When it comes to assembly everything fits perfectly.
Review translated automatically
Reliable opinion
Jawa 50 vintage 1979 in the process of restoration. I recommend the product met my requirements. I think I will be satisfied with it.
Review translated automatically
Reliable opinion
Very good and aesthetic workmanship of the components, does not deviate in appearance from the original. Meter indications correct.
Review translated automatically
Reliable opinion
The filter is good and there is nothing to complain about . It fulfills its role in Benzer Texsas 50 . I recommend !
Review translated automatically
Reliable opinion
As for such a low price it is worth buying fits perfectly to Romet ogar 205 so far works well. recommend.
Review translated automatically
Reliable opinion
Simson s51. Fulfills its purpose and on top of that a cool feature.
Review translated automatically
Reliable opinion
I attached the support to a WSK 125, unfortunately it did not turn out to be very sturdy. In the place marked in the picture immediately appeared play, which systematically deepened. In total, it withstood from 10 unfoldings and foldings with not excessive pressure from the motorcycle, it was used only on an even and hard surface (asphalt and paving stones). I'm not an engineer yet, but I'm not far off, so I would suggest reinforcing this component, probably just increase the thickness of the walls at the point between the support mounting to the motorcycle and the spring designed to hold it in the chosen position. I was a little disappointed because so far I have been very satisfied with your products, but I think you will make some changes and the product will be suitable for safe and durable use.
Review translated automatically
Reliable opinion
I bought a carburetor for ogar 205,at first glance it looked ok, after using a hand pump it fired up. On the revolutions screwed very nicely, but after a while died. Holding it at high speed it runs, at slow speed it does not want and no adjustment does not help. I've adjusted the fuel level with the float so many times I can't count, I even plugged the air filter from a jawa 50 and halved the air intake, for a while it runs at idle but has no power to go. This carburetor is a disaster, money thrown down the drain, I only got frustrated and annoyed, I should add that I have the engine overhauled and the original carburetor runs very nicely, the compression I have is 8 bar, I do not recommend, unless I am the only one who got such a specimen
Review translated automatically
Reliable opinion
WSK M06B3: The leg, when screwed on, interferes with the center stand - they cannot be used at the same time. It is slightly too long, making the motorcycle stand upright instead of slightly tilted. When folded, it is hit by the kickstand, and pressed touches the wheel rim. A very primitive cam, a weak spring and a single attachment point make it seem disjointed, and I was afraid to load it. Its advantage is that it blends well with the look of the black WSKi. It's possible that a lot of the shortcomings would be solved by bolting it to the rear wheel stabilizer mount instead of the footpeg, but the risk of sticking a steel rod in the spokes while riding discouraged me.
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
Finally a new faucet and the problem with leaking fuel disappears. Super quality. Additional filter and fuel line allow for a comprehensive overhaul of the "bus" that feeds the fuel system. Every part purchased from this store impresses with the quality of workmanship, nothing smacks of cheapness. Everything looks decent and solid. Thanks to the relatively optimal prices, you can even resuscitate the old Komar at a low cost.
Review translated automatically
Reliable opinion
I own a rometa 2 - passenger car. The purchased product was suitable only to send back to the seller, because it did not perform the function for which it is intended. Simply the square located in the worm ( 2 mm ) is too loose and the cable does not turn. It was necessary to make such a reduction from 0.3 mm sheet metal to make it work . I managed , I do not know how others. And what can you expect from the manufacturer " other " .
Review translated automatically
Reliable opinion
I own a Romet Kadet and decided to restore it, the problem turned out to be the lamp which did not survive the test of time fortunately at Gmoto I found what I was looking for although I was not sure if parts for such old mopeds are available, installation was easy put the bulb in, connect three wires and you can ride, the quality of the lamp is very good and delivery to the house was fast and also trouble-free I recommend.
Review translated automatically
Reliable opinion
Like the first gasket papers awesome awesome how well they do their job not one oil leak spectacular awesome awesome awesome I am tremendously grateful for selling such a good quality material ole! ostia lk asbestos are even better for exhaust systems gay god my what a cojonuda solution is wonderful and cuts very well I recommend it more than 200%.
Review translated automatically
Reliable opinion
Super gas line for Jawka and Ogarka 200 has been riding with this line since August and it is sensational, very close to the original, super parts, super is the adjustment of the tension of the gas line when I immediately put the line on it fitted without unnecessary complications. Lineczka very good quality and attractive price I can confidently recommend this line to everyone and recommend the store gmoto.pl
Review translated automatically
Reliable opinion
Hello everyone I own a 50cc motorcycle I recently had a major overhaul of the engine and fuel system. On the gmoto website ordered a fuel faucet along with a filter and hose. The whole kit is very well described and fits perfectly to this model of motorynka. In good conscience I recommend this product, I am very satisfied with it.
Review translated automatically
Reliable opinion
Unfortunately, as for this filter, the quality of the material is not at a satisfactory level, unless you measure yourself the correct lengths of the hose beforehand, put on the filter and do not move. When trying to remove the cable (by circling) one of the fuel hose connections broke off. It is possible that I got a defective piece, but there is no certainty. Here, unfortunately, I can not recommend the product.
Review translated automatically
Reliable opinion
Ignition pipe bought for a WSK 125 motorcycle, at first glance it looks perfect, a very important advantage is the covers to protect against moisture or driving in the rain. Why aesthetics "could be better", because the workmanship is good, but not refined. The important thing is that it works as it should, and I am also very satisfied with the service of the GMoto store, also recommend.
Review translated automatically
Reliable opinion