Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
2019-12-20, 08:50
Marek
Zipp quantum gt5 2013 I ordered two xeon bulbs. And when they reached me. One of them had a crooked shade (It's the blue glass). I put it on without touching the glass with my hands, of course. It was fun, but it ended quickly after 7 minutes of driving I had to go home on stoplights because there was a short circuit in the installation. I checked what was wrong and it turned out that one had reached the end of its life (visible in the photo). There was a horrible sweet smell coming out of the lampshade as well as from that bulb even though it didn't look burnt, that's what it was. And the 2 also did not want to be alone and 15 min of driving also made a short circuit and would not light up. Interestingly, the same smell accompanied 2, so from this I deduced that it was burnt and even swapping its place in the lampshade did not help.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-11-22, 14:58
Andre
I bought 2 sets of cylinders. There was nothing wrong with one of them. On the second, the liner was honed at an angle. In the upper area of the liner, an approx. 3 x 5 cm area was not covered. One piston had the recesses for the valves milled at an angle. See photo. The other is obviously already an oversize piston. As I have access to appropriate machines, it wasn't too bad for the hobby project.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-02-21, 08:42
Konrad
Kingway Zibo 50 vintage 2003 I bought the cover from gmoto I am very satisfied the cover meets all the conditions it is really durable I highly recommend as well as other products from this store, because they are really persistent greetings!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-02-18, 09:03
Piotr
Kingway Coliber scooter. Parts in quality even better than the original. Assembly went without a problem. The same parts on a popular auction site yesz that once so expensive so the price/quality ratio super!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-20, 07:08
hervé
fits perfectly on a scooter with a 139qmb 10" engine, takes 30 minutes to assemble, the quality is decent but no more than that, to be seen over time. delivery was catastrophic, I had to wait almost 3 weeks and with the DPD company they don't deliver to the customer but to a relay. I had to travel 120 km to pick up my order, which was stored at the Vemars depot, more than 59 km from my home, so additional costs plus time wasted. no commercial gesture so far from Gmotos. to be continued.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-14, 22:09
Przemek
WRONG!!! If someone has nothing to do with money this is a great choice. After firing it came 2s and burned. And long and short. It is better to buy any for 5 zeta sle zeby it works. I heartily do not recommend. In these piebiadzach I recommend something that works and not something thanks to which you will have to return from a night ride without lights. Expensive, does not work, no sense, I do not recommend and sympathize with the buyers.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-05, 17:00
Dariusz
Suzuki GSXF750 1999.Goods of very good quality, helpful not only in the installation of the fairings of scooters as you can see.I had a problem with finding the original mounting plates for screws to fasten the fairing to the console, especially since the sockets are very narrow and hard to fit something. And here you go, not only good quality, fast shipping, but also a nice price ;-) And there goes the problem. (Until I ordered more - for colleagues)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-10-11, 21:25
Rafał
Toros F16, everything even better than in the pictures, easy replacement and works as expected. Just a reminder because I forgot myself that you also need to have the clock ring in good condition to make it stick somehow And if someone does not know what and how is Youtube will explain :) best parts site with good price! Delivery also fast, ordered in the evening A 2 days later in the parcel machine package ready for pickup !
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-01-01, 15:35
Krzysztof
I own a Romet C1 moped. I was positively surprised by the power of the light and its pleasant color. Unfortunately, it blinds other drivers and I changed to my old 25W "bubble". My "motorcycle" does not have high and low beam in separate shades,so I can not give it as a road light, however, if you own a cross etc., I recommend it. Mine is already waiting for this fate, only the cross is still missing
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-04, 18:31
Ryszard
I have a scooter Kingway Mosqito 50 cm 2008 year I have purchased many things for it including clutch bell tuning R-Vent 107mm 4T from a reputable company with the repair of these components I have never yet had problems after purchase everything well matched and matched quality of materials and aesthetics very good.I recommend to everyone this store is a higher shelf.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-18, 08:18
Pawel
Hello. The materials I bought were matched to an old garden tractor engine. Everything was great. I was missing only full dimensioning for example pistons , rings, shaft. But this I understand because the parts are for specific engine Brands. After tel contact that the seller everything matched. Thank you Greetings and highly recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-01-16, 13:45
Paweł
Unfortunately I can not recommend this filter, because I got it with a defect, on the weld there was a very small invisible hole through which gasoline poured. I put the motorcycle together poured gasoline and here it dripped, and unfortunately it gave me a heap of work because I had to take everything back apart. But I'm not going to make an issue about a few zlotys.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-03-19, 10:01
hervé
very good quality cylinder head, adds power when the engine revs up, which can be felt on acceleration and top speed, gaining at least 10km/h if you add an A9 camshaft or more, you'll gain even more, that's for sure! Perfectly packaged .thank you Gmoto .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-22, 05:47
piotr
Hello I naprowiam skutrey,Qady etc.Ordered parts really are OK . If you order a good part, it rather has to fit, personally as a mehanik I recommend cylinder 65cm for GY6 4T IS in my opinion the best, fragile, 50 has too little power, 80 can take oil in a short time exploatation Greetings
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-10-14, 07:11
Maciej
Everything fits perfectly to the scooter for which I bought this set and as much as I can recommend the quality of the material very good and durable, the whole set is fitted and nothing was missing and the assembly in just 5 minutes. I am very satisfied with this product and recommend it as much as possible !
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-05-28, 08:00
Robert
Romet 727 scooter, the purchased kit was original, matching the scooter except for one part, changed technologically- in my case it occurs on the axle, which I can not remove from the lid, and in the new one is fused this mode with the axle. But the rest of the parts cured the scooter, so I am satisfied;-)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-02-13, 17:33
Andrzej
Nuts at an excellent price for 4 hard replacements for the original exhaust mounts on the Honda XR 125. Excellent value for money and a compromise between the original ones difficult to find only in Honda service, for a much larger sum! Highly recommended! 30 years of experience in mechanics!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-19, 17:22
Rudolf
I mounted the front shield on an electric tricycle, still on a test basis. Aesthetically it looks good.If I order a bigger size I will order a plexi, for better clarity. For this type of a bargain price, there is a slight blurring. However, due to the height, it does not matter in the view in front of me.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-01-07, 09:42
Tadeusz
ROMET CRS 50 (1997) with a HONDA MX 124cc engine from 1974 (and only 1 overhaul !!!) ŻBIK BOATIAN 49 . (WAS ) NOW IS 80cm3 2005 YEAR. KOMAR 49 1972 VINTAGE RIDDEN AFTER 3 ENGINE OVERHAULS .FACTORY PAINTING
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-06-16, 10:28
Michał
The bulb burned out after a kilometer driven. After lighting it up, a white residue appeared inside, which did not herald anything good. After a kilometer driven, the bulb to be thrown away. I went back to the factory one. It works all the time, and it has not been replaced since the beginning., Zumico GR 200
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-07-24, 21:26
Daniel
Good morning everyone I bought this product (gasser) I rate it very good immediately after installing it into the scooter without any interference with the settings of the gasser the vehicle fired up and runs evenly unlike the old gasser it is made of good materials. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-12, 22:16
Adam
I replaced the piston in my scooter with 139QMB engine and to my surprise as for such a price the piston really well done , Fits perfectly, the temperature also on it does not do together (does not swell) , mileage on this piston 300km and more and more fits ! I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-06-04, 17:52
Przemysław
I purchased valve seals for a 150cc quad. I also bought a starter and a set of gaskets also for this quad. With the quality of the parts I bought so far I am satisfied. As for the seller also no reservations. Fast shipping and hassle-free. I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-06-30, 14:35
Sebastian
I own a zipp steed 4t scooter with everyone knows gy6 engine,I ran out of rings but bought a new piston because it cost not much more, it was a good choice! The scooter gained the old power at a small cost, I recommend to anyone who has doubts about this product!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-05-03, 17:37
Paweł
Moto Ventus Sport 4T year 2007 gaskets are very good quality,they are very well cut,not damaged,they are very well fitted to the engine housings,MCN gasket company I highly recommend,engine not thin you can see that the gaskets are of good quality pozdrawiam
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion

































