Manufacturer
Price
Sort
długość:
Podobne:
średnica:
średnica:
Podobne:
średnica:
Podobne:
Browse by manufacturer
Products reviews
2022-06-25, 10:33
Karol
Junak 104 2T 2013 Very nicely made cylinder for reasonable money If someone gets clogged with a serial cylinder, an interesting solution is to buy this cylinder, for this nozzle is 0.10 more than before and for a little money we have a really dynamic equipment I have already driven 2500 km on this cylinder without any reservations Please do not expect a colossal difference in power compared to the series in my opinion, thanks to this cylinder significantly increases the torque and a little power at higher revs. + Good price + Relatively good performance + Inexpensive way to increase power -Very loose rings which makes it hard to put the cylinder on (once you put it on they come off very nicely) - Sfloor locks are difficult to turn (the push-in ones are better) - Too bad there is no exhaust gasket in the set Final rating: 9/10
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-11-30, 16:57
sylwester
Scooter inca street 50 year of production 2009 mileage of about 14000 I ordered a cylinder + heads 70ccm reason to reduce fatigue of the engine, after opening the box with the parts I started by inspecting the workmanship, I watched all the channels in which there are in the cylinder the workmanship itself is very good, the very tinkerer went through very easily from disassembly after assembly it took me 40 minutes if anyone has the idea to repair vehicles themselves it will do it in a similar or shorter time, currently taken picture is not fully visible but they are newly purchased things
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-09, 06:44
Paweł
My so called hobby is repairing. I currently own 3 motorcycles which are , Romet pony motorynka 1986 year which I have already 5 years , scooter Zipp toxic 2008r in a very elegant condition , and the third scooter jailong monsun is one typically for younger people because it is a little smaller and that's it ;)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-11-24, 14:55
Kacper
Zipp Rooster 50cc 2008 AC I am 100% satisfied with my purchase. Easy installation, everything fit perfectly. The product has met my expectations. Currently drove about 2500km on this kit and no problems. Everything made with attention to detail.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-09-09, 13:49
Daniel
Hello, I own a motorcycle-scooter zumico eos, 50cc 2t, 2009 year, I purchased an oil pump drive wheel. The product fits the model perfectly, solidly made and aesthetically packaged, installation relatively easy. I recommend !
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-05-22, 05:52
Paweł
Zipp quantum from the year 2005.50ccm.2T.It fit perfectly.After replacement completely different engine work.I added pictures of how the diaphragm should not look like.Remember no gaps on the plates.Here a picture of the damaged one.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-05-11, 22:39
Filip
Chinese CPI 50cc 2t - the frame certainly improves the aesthetics of the moto. Stably holds the plate and there is no chance for it to fly out while riding. Installation is easy and fast, worth recommending:)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-06-23, 08:48
Grzegorz
Hello I received not such a carburetor as I ordered and it is in the picture I received a carburetor with a second air tube . For the carburetor I paid 119 zl and received for 79 zl .Greetings .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-07, 20:42
Młody
The carburetor itself works ok.It adjusts quite well.Pre-set and it ran quite correctly.Unfortunately I ordered a different one than I received.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-18, 18:16
Adrian
Benelli 491 98r I was tempted to buy a frame from gmoto because when I bought something in the service and got a lanyard with the signature gmoto free of charge nice gesture fell to my liking so much that I wanted and frame for registration because it caught my eye somewhere there and the choice quite right why the quality without comparing to those frames from the office solid does not crackle holds the plate as expected does not vibrate the plate on the free under the plate a lot of holes and a lot of space for screwing such a head m8 fits easily visually polished and the same signature is not the usual print but a kind of silicone sticker and most importantly the clips hold like hell I do not have to worry about losing the plate
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-07-13, 08:10
Zbigniew
I bought this carburetor for a CPI Hussar 70cc 2000 scooter.In appearance and size it matches the Mikuni carburetor that was originally installed on this model. Visual evaluation of workmanship and materials very good. Hassle-free installation and first start-up. The carburetor pre-adjusted so that the engine fired up after 2-3 kicks. Adjustment of the mixture and RPM did not cause any problems. Now after a short time of use, the engine runs evenly and "pulls" well.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-19, 13:21
Renata
Good day I bought a carburetor here for a very attractive price and in a very easy way to pay what not all sites, stores offer online.The shipment came fairly quickly and the condition of the package was intact and very well packed.Every day I was informed when the shipment should accept whether it is already completed , shipped , also with finding the address there was no problem with the courier very highly recommend.Greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-07-09, 08:15
Zbigniew
I bought the cylinder, piston and head for a 2000 CPI Hussar scooter, changing the factory 50 cc to a purchased 70 cc. Visual assessment of the quality of materials and workmanship is not objectionable. Both the installation and the first start-up without problems. The piston and cylinder are only in the run-in phase, nevertheless, the performance of the engine is flawless, and the power has clearly increased (assessed in terms of top speed).
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-06-10, 13:52
Karol
Some time ago I ordered these variator rollers and they arrived very quickly when I mounted them to my scooter The scooter has become more aggressive has more power, the rollers are perfectly matched to the variator I have in my scooter improve the power of the scooter and speed. It was a very good choice that I made I recommend these rollers variator better scooter picks up and has.more power
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-04, 09:28
aleksander
Unfortunately, but the received gasifier turned out to be damaged , namely broken housing from the suction which made it useless. I have no time for complaints or returns, because it is again waiting for shipment. Apparently, the goods are not checked before shipment. A waste of money and time, and the scooter well - until the 10th will remain in the garage and I will again spend a fortune on bus tickets to work.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-06-18, 19:35
Jaczeg
Zipp Quantum, good quality cylinder, very good price. In general, I recommend so far everything rides like from the factory and I hope it will serve a long time. The scooter is much more dynamic, v-max has improved. Riding has become much more pleasant than on a 50cc I really like Gmoto store because I can order many different things with one shipment. And as for the cylinder I highly recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-08, 08:10
Jan
The above module , fits almost perfectly to my Yamaha CW 50 Spy , after its installation the scooter got a better engine operation , and its performance ( and especially "screwing" in the revs ) gives a nice sound effect , as for aesthetics it is well-fitted , I would even dare to compare it to modules from a higher price range. I highly recommend this module is worth the money.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-06-22, 10:14
SamuJami
The product arrived intact and matched the 70cc cylinder set I bought from gmoto. The product was flawless and the installation was easy. My scooter is a keeway f-act and I used the product to add more power to the scooter. With the cylinder kit, the product increased the power significantly. I would recommend to anyone buying the product to get a power tube along with the product and remember to break in at your leisure.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-07-01, 09:05
Kamil
"After installing the 70 2T cylinder and head in my scooter, I immediately felt the difference. The scooter has gained power and acceleration, which makes riding more dynamic and satisfying. The solid workmanship of these parts gives me confidence that they are not only efficient, but also durable. Now I can enjoy a smoother and more exciting ride!"
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-08-28, 18:53
Mariusz
Aprilia SR 50 AC cylinder fits very perfectly beautifully made nothing sticks out no blemishes on the outside no ducts can be seen no holes nothing sticks out inside which greatly affects the quality and flow resulting in smooth power output and life tests but the predecessor of unknown origin seized up after 10 km deflated like a balloon
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-07-11, 14:49
Rafal
I am very satisfied I read the opinion of these cylinders on the forums and I find that people do not rightly embed cheap cylinders I have and my Ferro 803 years like crazy I understand that someone has more money and flies thick with purchases of good branded parts I do not need it and I appeal to others Chinese does not mean bad greetings gmoto
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-01, 07:32
Kamil
Hello I own a keeway fact50 ordered carburetor looks like a decent design, after installation required minor adjustments but with firing there was no major problem, a dozen or so kicks to flood the chamber and ignited. I got because 2 days after ordering so quickly especially since I ordered after 18.So far I am satisfied with the purchase, greetings.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-10-28, 08:16
Sylwia
zipp GT increased 70 ccm just change the nozzles no problems with this gasser with adjustment etc speed max 80-90 km nicely collects at 5.5gr standard rollers I have two zipp and already in the second one also this gasser is previously pseudo tuning thick coil was forever cleaning adjustment etc left revolutions ,, recommend 10/10
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-09-17, 06:38
Arkadiusz
Inca street 2t 50 . After purchase stator fits very well scooter fires up . Fitting to the model of scooter very good , aesthetically also very good but one small problem is the base of dur aluminum which is fragile. However, you can not hold a grudge against the store . goods most importantly consistent with the description .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-06-24, 14:52
Jakub
I currently have a Toros f16 scooter.One day my turn signals did not work so I ordered a turn signal interrupter because the previous one burned out installation was quick and easy.And then I bought a gas switch because the previous one did not suck in the fuel I bought the product was as described I am very pleased.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-05-28, 00:16
Rafał
Scooter 2017 Toros El Rio Fit 99,coma 8% The most important thing is that everything works.I AM satisfied with this store more than on allegro because here everything is described in detail before buying to which I fit all models listed is solid and clear .This store I like the MOST .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-11-21, 10:25
Miroslaw
A neighbor owns a scooter brand barton orlando. the bearing fit perfectly shipping time less than 24 hours. It is just a pity that buying a set of pistons, rings, cylinders and head is not included in the set of the bearing and you have to order them separately. but ultimately the item corresponds to the description in 100% RECOMMEND.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-06-26, 07:42
Łukasz
Kreidler Rmc-c 50cc scooter. I ordered this kit quality of workmanship very good everything fits nicely overall I am satisfied. I ordered this cylinder about a week ago. I just received it everything in is fine. I recommend to each individual and most importantly very fast shipping.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-04-16, 10:42
Grzegorz
WSK 125. stator fits, which can not be said about the made CDI ignition for this motorcycle. Due to this very workmanship, I had to additionally buy a new stator, as the one there was damaged by the magneto working too closely. In addition, I had to improve the stator base.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-24, 09:54
Krzysztof
I ordered a carburetor for a 2009 Yamaha aerox 50cc stage 6 I am impressed with how the purchase went I had the carburetor after 2 days as for the carburetor itself it's a revelation after installation there was no need to do any adjustments the bike runs better than new I really recommend I am mega satisfied
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-04-26, 11:59
Artur
Zico simpli 2t, 2006r, 7500 km mileage, unfortunately, but the cylinder did not meet my expectations, the poor quality of workmanship unfortunately determined the decision to return the product, the cylinder had fatally finished windows in the sleeve, I was afraid that the rings would begin to hook against them and crack,
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion



































