Motorcycle parts
Sherco SE 50 Enduro 2010

2025-09-21, 20:49

View original

DENJEAN

I have bought many top ros cylinders from you, or the same model in black or grey ... the pink ones I repainted in grey for discretion ... very good value for money ... I prepared a few bikes for young people who really appreciated the performance ... unfortunately I don't have any pictures ... ke can take some disassembled cylinders and I'm going to reassemble one because I've just tightened a most 86 ... I mount them up to 88cc with vilo C45B90

Review translated automatically

Reliable opinion

2022-06-30, 07:45

View original

Wojciech

The carburetor works very well I have a generic trigger 50/80 and the nozzle I put in is 95. The carburetor is very cool with its color because red=fast. It is very efficient to replace the nozzles. The quality as for the replacement quite cool there is nothing to complain for such a price. I wholeheartedly recommend :)

Review translated automatically

Reliable opinion

2021-04-19, 11:14

View original

Sebastian

I have an Aprila mx 50 so I bought this product due to the reasons of the seizure of the previous one, which was already when I bought the motorcycle and I recommend this product works well and to keep it that way longer. I don't have pictures of how it sits now but I am mega satisfied.

Review translated automatically

Reliable opinion

2021-03-01, 15:44

View original

Michał

Keeway TX 50 2011 2km. The moped became much more nimble after using this carburetor. The replacement took about an hour, the carburetor fits perfectly. It was enough to screw everything in and the moped was laughing, I did not have to adjust anything.

Review translated automatically

Reliable opinion

2020-06-01, 22:36

View original

Mariusz

Rieju MRT 50 2013 year Cylinder workmanship satisfactory for a budget kit.Seals could be better made make it difficult to install. Moto on this kit much more powerful.Much better bottom end. Overall I recommend.

Review translated automatically

Reliable opinion

2020-05-11, 21:02

View original

Andrzej

I own a 2006 Cross Cpi Sx 50/90 , I purchased a cylinder so-called raspberry I am satisfied with the workmanship as well as the quality of packaging and completeness of what is needed for installation.

Review translated automatically

Reliable opinion

2022-01-03, 15:17

View original

Antek

I recommend this carburetor very good quality workmanship Fits under serial parts and under tuning parts should be in it only still replacement nozzles works well even in heavy terrain

Review translated automatically

Reliable opinion

2024-12-15, 22:25

View original

Goncalves

This product is really great I recommend it piss well mounted just not the clips for the piston otherwise otherwise it's really quality.

Review translated automatically

Reliable opinion

2017-12-16, 09:37

View original

Jakub

I purchased a Cylinder with a head of 90cm3 AM6- price-quality ratio I think excellent. And the assembly. If I had a helper and the right tools.

Review translated automatically

Reliable opinion

2022-05-21, 09:28

View original

Jakub

Rieju MRT pro 50 2010r I bought this product very good quality and workmanship as folding everything went smoothly and quickly very I recommend.

Review translated automatically

Reliable opinion

2024-09-24, 20:55

View original

Jakub

The purchased Dellorto PHBG 21mm replacement carburetor is distinguished by its solid workmanship, which ensures its durability. It is a universal product, fitting many types of motorcycles. Precise fuel metering significantly improves engine performance, offering better acceleration and smoother operation. Installation is simple, and the carburetor fits well with the systems on the motorcycles it is compatible with. The quality of the materials is good, suggesting a long service life. The aesthetics of the component are typical of this type of part - minimalist and functional.

Review translated automatically

Reliable opinion

2017-10-21, 11:29

View original

Patryk

I own a Husqvarne/CHRacing WXE 50 with a 2007 AM6 engine. Unfortunately my cylinder was seized and with help came the Gmoto website where I could buy the same cylinder but from WM Moto instead of the predecessor (NoName).The difference? The one from WM has a better fit of the piston and ring after measuring the gaps.Its channels are more precisely made (on the predecessor there were pieces of casting left).The price as right,I highly recommend the product.

Review translated automatically

Reliable opinion

2021-10-04, 08:38

View original

Mikołaj

I own a 2007 Yamaha DT 50R with an am6 engine. The installation of the carburetor went well, without any surprises. I rate the quality of the carburetor as average, the paint comes off due to the high temperature and gasoline. As for the performance of the carburetor, you can really feel the difference. I recommend this carburetor to anyone who does not want to pay 600zl for a branded one.

Review translated automatically

Reliable opinion

2024-01-04, 13:27

View original

Mikołaj

Carburetor very good quality and low price!!!, My customer is very satisfied with the tuning on the 48mm cylinder. Kit fitted to DT 50 along with other components from Gmoto wholesale. I received professional advice from the technical support department for wholesale. Greetings to Mr. manager of the wholesale department.

Review translated automatically

Reliable opinion

2025-03-17, 23:26

View original

andreas

Good product, easy to install, very good torque at low revs, but a higher piston-cylinder clearance would be better because I had to tighten it several times. The piston was scratched in the administration area, but the cylinder didn't get any milk for the price, so it's a good product.

Review translated automatically

Reliable opinion

2024-05-03, 17:40

View original

Daniel

A fake is known, a lot of simplification compared to the original, diameter tolerances much worse, lots of post-production filings inside, etc. But after cleaning in an ultrasonic cleaner and putting it in the moto, this carburetor can be adjusted well and works basically like the original.

Review translated automatically

Reliable opinion

2019-03-08, 06:35

View original

Kacper

I ordered a cylinder for aprila mx 50 from 2002 year cylinder looks great very fast to install what went without any surprises and failures motorcycle perfectly starts perfectly cranks on revs how to recommend.

Review translated automatically

Reliable opinion

2024-10-15, 06:42

View original

DENJEAN

I'm still very happy with my purchase, it's the third or 4th time I've ordered and I'm always satisfied! just the packaging isn't very solid but I've never had any problems or damaged products. Sincerely Steph

Review translated automatically

Reliable opinion

2022-06-26, 09:38

View original

Dawid

Hello I would like to highly recommend here this BEAUTIFUL and cheap replacement for AM6. As for its price, the quality is adequate to it and the fit is 1:1 to the original AM6 cylinder. I would highly recommend this product to you :)

Review translated automatically

Reliable opinion

2023-08-01, 06:22

View original

kacper

The best replacement for dellorto that there is, 50cc rips off the asphalt gray smoke I recommend as much as possible to anyone who what to improve the performance of his pizdzik cheaply because for this price it is solidly made

Review translated automatically

Reliable opinion

2020-12-20, 11:30

View original

Kamil

The quality of the bearing is very good , without any reservations. It is well-fitted into its place without any unnecessary play. Aesthetics in the best possible order, price to quality. I am satisfied with this product.

Review translated automatically

Reliable opinion

2021-01-25, 11:15

View original

Kacper

From buying a cylinder and installing it in the motorcycle, the motorcycle goes like a shot. Very fast delivery right to your door. I highly but highly recommend this cylinder because it is very cheap.

Review translated automatically

Reliable opinion

2020-04-13, 12:43

View original

Marek

The parts I bought recently gmoto.pl are very good I recommend the seller I have already bought more than once and I am satisfied with the purchased parts from gmoto.pl I highly recommend the seller

Review translated automatically

Reliable opinion

2016-09-05, 09:57

View original

Marcin

Aprilia rs 50 1998r super made raspberry, resurgent edges of the exhaust window, no comparison better than from the competition where even the gaskets did not fit

Review translated automatically

Reliable opinion

2023-05-18, 09:14

View original

Karil

I am very satisfied with the whole set. Both the cylinder as well as the piston and rings solidly made. Even the intake channels quite well made, the kit as described.

Review translated automatically

Reliable opinion

2024-11-06, 05:12

View original

demarque

I received mo. Cylinder before yesterday no problem to mount it even gasket and a spare ring quite happy with the product I recommend

Review translated automatically

Reliable opinion

2025-05-06, 06:48

View original

Urpo

High quality machining and a part that fits well.The price is reasonable and delivery is fast. Low price compared to a domestic equivalent.

Review translated automatically

Reliable opinion

2020-07-28, 23:13

View original

Kamil

Cpi Sm 50 2012 Product as described Well made Installation went without a problem Aesthetically cool looking and has its strength Recommended!!!

Review translated automatically

Reliable opinion

2021-04-15, 09:45

View original

Bartosz

It fits the Yamaha DT 50 very well quickly and without problems, we installed the carburetor, the quality of the carburetor is as satisfactory as possible for the price.

Review translated automatically

Reliable opinion

2020-11-30, 10:05

View original

Artur

Keeway XT 50 cylinder for a budget 90cm is very good the only downside gaskets you have to struggle, to put them on but yes I highly recommend it.

Review translated automatically

Reliable opinion

2019-09-11, 14:03

View original

Monika

Cylinder with head 90cm3 am6 Raspberry very good quality kit very well made with attention to detail I recommend to everyone fits without any problem

Review translated automatically

Reliable opinion

2017-10-27, 07:44

View original

Mateusz

Aprilia RS50 2004 90cm Mounting simple I think that anyone could cope with it. Quality I consider very good, everything fits elegantly. I recommend

Review translated automatically

Reliable opinion

2021-04-05, 12:16

View original

Paweł

Motorhisoania Furia 50 2009. after tuning The carburetor fits almost great a little too little space in the frame. But it is great in terms of performance.

Review translated automatically

Reliable opinion

2021-04-05, 12:16

View original

Paweł

Motorhisoania furia 50 2009 After tuning The gasser fits almost great a little too little space in the frame But it is great in terms of performance

Review translated automatically

Reliable opinion

2025-05-02, 08:41

View original

Miguel

I mounted it Ace 3 months to my son's bike and it is the one that runs the fastest of all the group.

Review translated automatically

Reliable opinion

2021-06-17, 09:10

View original

Kamil

Cylinder raspberry one of the cheapest cylinders for am6 performance improved significantly and there was no problem with installation. I recommend.

Review translated automatically

Reliable opinion

2021-03-29, 16:18

View original

Bartosz

Motorcycle Keeway TX 50 2011. The carburetor you can see that from the lower end, much to be corrected. Currently it will be lapped and we'll see how it goes.

Review translated automatically

Reliable opinion

2024-02-02, 07:55

View original

Karol

Mega interesting set and for not much money provides a lot of fun and feel with power really a product worth its money.

Review translated automatically

Reliable opinion

2021-02-01, 08:20

View original

Jakub

The cylinder of very good quality came very well protected there was no chance to make a scratch, let alone cracks.

Review translated automatically

Reliable opinion

2024-05-02, 10:40

View original

Oskar

Hello purchased raspberry 90cc kit worked very well easy installation durable price adequate to the product recommend

Review translated automatically

Reliable opinion