Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Simson S50 - Page 5
Manufacturer
Price
Sort
€11.07 €13.03
Lowest price from 30 days before discount: €0.00
from 20
Browse by manufacturer
Products reviews
Money thrown down the drain in the front lights bulbs 5W and in the original I have 21W I thought what's the problem I'll put the old ones and here's the problem they don't fit, you can't screw on the cover of the turn signal, now on these bulbs blink very quickly you need to look for the orginals
Review translated automatically
Reliable opinion
Thread reduction used to repair the Romet head, fits most of the communist vehicles, it is easy to repair the damaged head yourself, all you need is a drill and a threader of the right size.
Review translated automatically
Reliable opinion
Very good quality. Well painted everything fits with the original steering wheel from the switch from the lights comes out the electrical harness. Will improve the look of your Simson recommend
Review translated automatically
Reliable opinion
This is the second time I used such a reduction. The first time as well as the second time it fit perfectly. I recommend!!!
Review translated automatically
Reliable opinion
Of course, the goods as much as possible to fit a motorcycle which is a WSK 125. The goods in the first term I received damaged (the hole for the cable was missing), but after filing a complaint, the staff ensured that they would send the goods complete, which is a big plus on their part ( in the second term the goods arrived complete and very quickly). I have no objection to discourage the purchase of this merchandise, so I recommend it, because in case of failure of the rope it saves and helps to get home efficiently.
Review translated automatically
Reliable opinion
Moped peda but made in China 2007 year 50 capacity. The product is too weak it let go after 30 min of riding. The hole for the cable was too small I had to enlarge and besides, the broken end of the cable will always be flared and with a larger diameter so you will not do it quickly on the street. I recommend buying a new cable and not playing with replacements. Replacing the cable will do in an hour if you have never done it and the cost is 20 - 30 zl. In the picture it is made of brass and they sent a different one.
Review translated automatically
Reliable opinion
WSK 125 1985. I chose an electronic interrupter because the traditional one with a resistance wire used so far sometimes jammed while driving under the influence of vibrations - the indicators lit up with a continuous light. Now the problem has disappeared. Only its interruption frequency is a tad too high, but this is probably because it is designed for LEDs and I have ordinary two bulbs of 21watts per side. I recommend
Review translated automatically
Reliable opinion
Bushings very solid to rometa kadet fit I bought more as if they died. I recommend the purchase and the store. I am surprised by the honesty of the store. I made an order then a second basket and they returned the cash and made in one order. The second situation with the lamp for rometa cheapened they removed the basket and made with a lower price. I recommend the store
Review translated automatically
Reliable opinion
Good prices, some products available only here. I bought rubber shock covers - they fit bicycle shock absorbers. The originals are not produced, so this is the only place to get such a thing at normal money. The quality does not knock, but for the price it is as OK as possible. I recommend!
Review translated automatically
Reliable opinion
The sleeve is nowhere near the sleeves coming out in the wsk. In a motorcycle wsk came out with a minimum diameter fi 10mm not threaded and in this case we have a roller furniture nut. This is the first time such a thing has happened to me since I have been shopping in this company. Complain nothing because it is not worth the trouble. Too little value.
Review translated automatically
Reliable opinion
SHL M11 - interrupter inserted for the previous one that had run out, size-wise this one is a little bigger. It gives the impression of being more solid than the one I had before. Installation without any problem due to the fact that the entire turn signal installation was done by me (there were no factory turn signals in SHLs).
Review translated automatically
Reliable opinion
Jawa 50 armored type Super product, perfectly holds the plate. They look identical to the original ones. I have no reservations about the rivets. Carrying out the renovation of the motorcycle are irreplaceable. Wanting to paint the frame, you need to remove the plate and the old rivets do not properly hold the element. I recommend
Review translated automatically
Reliable opinion
They have a different radius at the header than what fits on the Jawa Mustang (we were recommended these for mustang rims) and they seem to fit more like a Simson. They also seem very stiff, they are normally more flexible, but I don't think that would be a problem. Otherwise nice looking, nice quality chrome plating.
Review translated automatically
Reliable opinion
Repairing Jawe 50 on gmoto you can count on, here you can buy everything you need, even every smallest detail such as brake bushings, etc. dealing with the overhaul of vintage mopeds or motorcycles there are parts that can not be repaired or is not worth it, and that is why gmoto is ok.
Review translated automatically
Reliable opinion
The ideal thing in a difficult situation when the thread of the plug is already leaking or completely broken. Without having to look for a new head (sometimes unobtainable or at a horrendous price) even in the garage having a stand drill you can repair the damage and continue to enjoy your oldtimer.
Review translated automatically
Reliable opinion
SHL M 11 The bushing has no dimensions, it is not suitable for anything. I do not understand why it is on offer if it does not fit? Hardly, it appears on many sites for various motorcycles and it is an exaggeration to put on the site Junak M10 M 07 where, after all, such a component in this motorcycle does not occur.
Review translated automatically
Reliable opinion
Rivets may be expensive for such a triviality but they are great. Gently swollen in the middle with grooves that cut into the material of the hole. Thanks to these advantages, it is not necessary to seal the rivet, Just drive the rivet and it holds the plate perfectly, at the same time it does not interfere with the installation of the post.
Review translated automatically
Reliable opinion
Simson schwalbe 1987 kr51/1s I bought for him center foot because the original lost one of the legs and I admit that it is done better than the original, refined 100% and fits super. Assembly took place without a problem. I have been buying from Gmoto for a long time and so far have not been disappointed.
Review translated automatically
Reliable opinion
As for the lamp it's ok, but the turn signals are already poor, two were missing bulbs and the gaskets were so hard that they cracked when putting them on, while the other two were normal rubber but the glass fit required new screws (shorter).
Review translated automatically
Reliable opinion
Spokes for Simson S51. Perfect and they look nice. The quality is very good. I have only one remark: one spoke for the set was missing from the package. Well I searched that the collection of old best and made up the lack.
Review translated automatically
Reliable opinion
Simson S51 E/4. A poorer and cheaper version of the S51 E in terms of electrical system, identical to the S51 N model. It had a 4-speed transmission. Production ended in 1988. Assembly mileage very easy.
Review translated automatically
Reliable opinion
Switches looks very nice visually, fits the Simson without any modifications, maybe only instead of giving the cables to one casing they gave to two different ones and it doesn't look too much, but other than that very nice
Review translated automatically
Reliable opinion
The turn signals came to me in good condition but unfortunately I sent back due to the fact that the turn signals came on plastic mounts. The photo is not consistent with the delivered product. This was the case with mine
Review translated automatically
Reliable opinion
The thread should be all the way to the end , because it sticks out a lot beyond the outline of the head in the Dezamet engine and as in the Simson S51 engine. You have to grind a lot , but then the thread is too small to screw in. I do not recommend :/
Review translated automatically
Reliable opinion
The nameplate rivets do the job, they fit perfectly and reflect the communist era. The 1982 WSK 125 motorcycle highlights the restoration details thanks to the rivets. Recommended.
Review translated automatically
Reliable opinion
Very good quality product, everything fits perfectly, made of decent material, so I know it will last a long time. I recommend parts from the store.
Review translated automatically
Reliable opinion
Product as described, price very good. shipping very fast. I recommend as much as possible. I am most satisfied with the quality and speed of shipping
Review translated automatically
Reliable opinion
Rivets not yet used but I tried them on and they fit perfectly the price is a bit staggering but I can understand it because who will run around the warehouse and look for a rivet for 30 cents
Review translated automatically
Reliable opinion
Wsk 175 M21w2 Interrupter works flawlessly.The previous one, which I bought complete with led bulbs, on the switched on engine gave a stroboscopic effect .
Review translated automatically
Reliable opinion
The rivet has a slightly too small diameter of the head to rivet the plate to the Shl-ki m11. You have to give a washer so that the plate does not fall off.
Review translated automatically
Reliable opinion
Wsk humpback 125.Rivet perfectly reproduced on the original.Looks good and holds the plate very well. Super quality for so little
Review translated automatically
Reliable opinion
Rivets used on the WSK 125, easy installation, designed to be hammered into a specific hole for plate mounting, no need to tap.
Review translated automatically
Reliable opinion
Product as described by the seller. Super quality and full reproduction of the original. I definitely recommend shopping at gmoto.pl !!!
Review translated automatically
Reliable opinion
Java ts 350. rivets fit very well. The right length and width. They do not interfere with the front skewer in operation.
Review translated automatically
Reliable opinion
Very well made product I am 100% satisfied it fits perfectly and will help me a lot in rebuilding my motorcycle
Review translated automatically
Reliable opinion
(WFM 125cc 1962) - Nit looks identical to the original. I think it is worth it. Good product at a low price. I recommend!
Review translated automatically
Reliable opinion
Mosquito 2350 - solid workmanship, looks good and fits perfectly, I recommend this product in good conscience
Review translated automatically
Reliable opinion
Everything fit and performs well. Rivets made of good material, durable. They look like orginal
Review translated automatically
Reliable opinion
Rivets perfectly fit bdb quality,, fit perfectly . Installation very simple only need a hammer and a drift.
Review translated automatically
Reliable opinion
WSK 125 Great stuff, super quality, express shipping. When you need motorcycle parts to gmoto!
Review translated automatically
Reliable opinion