Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
2022-08-16, 13:45
Mateusz
Rubber shifter very comfortable when changing gears driving a motorcycle becomes more comfortable and extends the driving on long journeys rubber is resistant to high temperatures as well as minus temperature does not lose its properties ideally fitted in the gearshift lever, there is no backlash rubber does not rotate sits tightly in its place I recommend if you appreciate a good and comfortable ride
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-30, 12:50
Krzysztof
Hello As for the product re: quality and aesthetics are OK but there is a small but about their fit: I have a reservation about the lampshades that I received from you and namely I received two pieces with different patterns. One lampshade has a circular embossing pattern and the other lampshade is embossed in a pattern of spreading rays. I don't know what the issue is here. Motorcyclist
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-22, 11:27
Seweryn
Moped Simson s51 enduro N version very good I can recommend but they are not in appearance like the original umnie it could be factory defects but they look good for the price
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-08-23, 08:48
Michal
Fits not only to Simson MZ to Yamaha DT works very well :D regards I would like to win a voucher for my next purchases from this store.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-11-17, 12:33
Artur
Simson Sr50 c 1989, I put on the spring for a test, it seems to be good, the fit is sufficient, the clutch no longer slips.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-07-24, 23:20
Kacperowsky
Simson s51 enduro 1990 turn signal is really very well made,very well fitted and very good looking
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-25, 22:43
Zbigniew
The lamp is made very well. After it is screwed on, everything fits nicely. There is no problem alby connecting it.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-02-25, 08:28
Krystian
Wsk 175 1980 The parts fitted well can be recommended to other motorcycle users. Workmanship quality good
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-15, 10:04
Tibor
Super Thank You Tibor Hungary I always use this.always that my buyer.thank you to the store.fits well.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-08, 09:20
Michał
Everything is as described. Fits perfectly with the original steering wheel. Good workmanship good rubber. I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-14, 07:35
ARKADIUSZ
Mz etz 250 material good and workmanship Great nice appearance, workmanship aesthetic. I recommend!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-20, 05:59
Beata
I purchased a 12V turn signal interrupter. The product is solidly made, with durable materials that ensure long life. The interrupter works flawlessly, providing smooth and regular flashing of the turn signals, which improves visibility and safety on the road. Installation is simple and intuitive, compatible with most 12V systems on motorcycles and cars. Aesthetically it looks good, its small size allows it to be discreetly placed in the vehicle. The product is reliable and weatherproof, making it a great choice for anyone looking for a durable and effective solution for their turn signal system.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-20, 05:57
Beata
I purchased a shifter rubber for a MZ Simson motorcycle. The product is made of high-quality rubber, which is both flexible and durable. Installation of the rubber on the lever is simple and does not require specialized tools. The rubber fits perfectly on the shifter, providing comfort during shifting and protecting shoes from abrasion. The aesthetics of the product are neutral, but it blends well with the rest of the motorcycle without disturbing its appearance. The rubber is resistant to wear and weather conditions, making it a great choice for any MZ Simson owner looking for a durable and functional solution.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-02-08, 09:25
Izabela
The clutch handle with body and cables for the lights is an essential part for Simson S51 owners, but installing this kit can be a bit of a challenge. The kit lacked a wiring diagram for the cables, which made installation significantly more difficult. Despite this, after installing the handle together with the cables, everything worked together nicely. I hope for long-term use without the need for replacement. In conclusion, despite some difficulties during installation, the clutch handle with cables for the lights / body is worth considering for those looking for improvements for their Simson S51.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-11-07, 19:19
Mikołaj
When ordering this product I was going to get a SEGER RING !!!(it's a kind of circlip which has a slightly different look and in some cases is a better solution than the usual protection) And I got what ? the usual pin protection which you get together with a new cylinder and piston in a set . So that how to sum it up what is in the picture is not what I received. So I do not recommend !!!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2022-08-12, 15:34
Boszu
It's cheap, quality is average, but for the price it flashes. If you do not require it to be a one in 10 years purchase, but something that is expected to withstand the conquest of the review and the first encounter with another hard part after which it will break. This I think can be recommended. ^^ A good option for inexpensive restoration of equipment that is expected to stand more as an ornament than if used. :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-21, 16:50
DARIUSZ
Interrupter decent, when you turn on the turn signal works without unnecessary delay. Workmanship as precise as possible. It works flawlessly. Terminals made very well, the connectors stick like glued, They are wide enough that you have to use force to slide the connectors onto them, which is a great advantage. This is a really solid and refined design.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-17, 08:57
Kamil
I've been putting together a 1983 Etz 250 for a few days for a neighbor who is the first owner of this beautiful motorcycle. Unfortunately, the blinkers were not working, it turned out that the fault was the turn signal interrupter. Immediately with help came ,,gmoto,, fast delivery super workmanship, easy installation and beautiful aesthetics. Until it is nice to repair the motorcycle!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2016-06-05, 11:11
Mateusz
simson s 50 from 1976 year3 gears.Rubber indealnie fits to the gearshift leg and looks like the original and this is what I care about,very good quality workmanship More confident now to change gears, nothing falls off, holds perfectly. I recommend other users of motorcycles of the era because it is really a very good product at a ridiculous price.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-31, 09:41
Miklós
A weboldal tökéletes, minden igényt kielégítő. A szállítás még így is, hogy nemzetközi (Lengyel - Magyar) gyorsabb volt, mint sokszor Magyarországon belüli szállítás. A kifizetett alkatrészekről, a csomagom állapotáról folyamatos jelzést kaptam. Az alkatrészekkel 100 %-ban elégedett vagyok :-) *****+*
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-04-16, 21:27
Dawid
The sensor bought for Etz 150. after installation in the motorcycle did not work! Here a big minus! The quality of workmanship poor. The plastic pin that pushes the sensor made of very poor quality plastic, overall junk and in addition I have to buy another one because, as I mentioned, it did not work, and it was straight out of the foil.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-08-21, 05:22
Janek
for the price the muffler very good quality, all nicely chrome plated, the welds could have been sanded a little better, the set included both clamps also nicely chromed, which is a plus Fits on the elbow to the ogar 200, a good muffler for a replacement of the original for nearly 600 zł
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-15, 15:38
Joanna
The spring was purchased for Simson S51. The workmanship of the product is high, and the price is quite low. After the spring quickly degraded the current one so far performs the expected task and works flawlessly. The installation itself took place without any problems.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-16, 15:19
Patryk
My motorcycle is a Simson SR50, it is an iconic motorcycle that will become trouble-free and better to ride thanks to the purchase on Gmoto.pl. As for the quality of the product, I can certainly say that the aesthetics as well as the fit are just perfect.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-09-08, 18:18
Jan Luňák
turn signals on MZ 150 , all OK, one glass has a small crack ¨ I mounted it with that too, if you want to send me a replacement glass you can, if you don't you don't have to. The crack is not visible at a cursory glance, you have to look directly at it.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-18, 23:21
Bartosz
MZ ETZ 250.I am very satisfied with the purchase of lampshades for Mz. I ordered three new lampshades,because I had one original,but I will have to order another one.Because it is much nicer,and above all refreshed.I recommend heartily :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2025-04-02, 18:54
Stefan
Very good processing. Unfortunately no information received that the shipment was forwarded to a parcel store! Great guesswork as to which parcel store was meant. Nevertheless, everything was fine. Will order again. Many thanks and best regards.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-08-03, 19:36
JAKUB
Simson SR50, wire thickness ok, spring hardness ok, outer and inner diameter ok, but length not ok. You have to trim and count the number of coils comparing with the old spring;) Well, unless someone wants a harder suspension then ok;)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-10-05, 07:39
Arkadiusz
I made a purchase of a rear lamp for a Simson S51. It was probably damaged during shipment and broke in two places. A new lamp shade for the lamp was sent without any problem. Very good contact with the store representative.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-07-24, 10:28
Maciej
This interrupter is OK. I connected it in place of the old one and it works. The frequency is good. Only a small problem with the mounting. It does not fit in the original holder. However, this is not a problem just a simple tritrite and you are done. CZ 350
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-05-18, 09:42
Aleksander
Simson s51 - The turn signal is ok, it is not like the original, but it is not bad. You can see the differences with the original, including the plastic, which reeks of Chinese. Other than that, I have no objections, the direction works elegantly.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-19, 14:35
Marian-Andreas
Hello I buy willingly at Gmoto.pl because they always have the parts needed for the simson I can agree on a discount, with the shipping of damaged parts is also no problem, parts so good and aesthetically made. Greetings and recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-08-21, 23:13
Jakub
Simson S51. The jaws too large for the original drum on the simson, it was necessary to grind the top of the lining. After the modification, everything works as it should, and the jaws themselves are made of good materials.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-06-16, 12:05
Marcin
Very good replacement, the turn signals work properly. Workmanship and appearance also without objections. Well, and above all, a fair price for a very good working interrupter. I am satisfied and recommend it.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2023-10-03, 17:13
Emil
The grip is of average workmanship, as there are pieces of rubber, which does not look too aesthetically pleasing, but this is shown in the photos. The material from which the grip is made is of good quality. A cool grip for the price.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-12-14, 12:16
Piotr
The automatic is too long, making it impossible to install it so that it works properly. I don't know how it's manufactured, but since it's supposed to fit the selected model, the dimensions should match the original.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-04-15, 09:42
Arleta
I purchased parts for Simson S51 for the second time in your store. All parts as described, well made, durable . I highly recommend buying parts for Simsons from Gmoto online store !!!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-05-21, 12:14
Jacek
Yamaha XJ6 of 2013 volume 600 the product I bought after a little modification fits of course through my fault I did not pay attention when choosing that my font is round. Greetings Jacek I RECOMMEND this store
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-11-06, 18:39
Piotr
I recommend the goods like the original. I am a regular customer of gmoto, I am always satisfied with the quality of the products they offer. Dealing with motorcycle restoration I buy only from gmoto good quality and price.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-08-19, 14:30
Marian-Andreas
Hello I buy willingly at Gmoto.pl because they always have what I need for my simson, you can agree on a discount and send back damaged parts at any time. Greetings and recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion




































