Motorcycle parts
Skutery z Chin BT50QT-11 50 4T Retro 1 Sitzer 2005 - Page 5
Manufacturer
Price
Sort
rodzaj:
rodzaj:
rodzaj:
rodzaj:
rodzaj:
rodzaj:
Podobne :
Browse by manufacturer
Products reviews
2022-08-16, 13:47
Mateusz
The fuel filter fits nicely into the fuel hose, gets in tightly, does not sweat or leak anything filter is resistant to any impacts caused by such as accidental collapse of the motorcycle well filters the fuel from filings and various dirt that may accidentally get into the tank such a fuel filter will easily last for a year. I like the fact that it is transparent and you can see whether the fuel is flowing to the gasser or not I highly recommend it.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-06-04, 17:38
Radzio
I have a 2006 Baotian bt49qt-9 scooter and before the coil was fitted it was muddling and sometimes dimming. Most simply put, it did not run evenly. So I ordered an "ignition coil tuning Chinese scooters GY6 4T", which as it turned out after installation a hit. The engine began to "smoke" less from the exhaust and began to run evenly. I recommend this purchase to everyone who has the same symptoms. Above all, it stopped "mulling" and became more sprightly. I highly recommend it!
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-04-28, 07:25
Andrzej
scooter baotian 2008 mileage is not great because 8000 km, purchased a better gasifier than the original, very well matched, the quality of workmanship very accurate which allows for ideal adjustment of the gasifier, not what the old. The scooter got a new life, it runs better than after purchase.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-10-18, 16:31
Jakub
Chinese scooter torq 80ccm 2016. About the cork as it is about the cork much to write, workmanship, fit and quality of materials at a high level, the seal sits as it should, nothing leaks, nothing drips. I recommend this product as much as possible.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-31, 10:14
Cezary
Scooter boatian 50 2000r . Chain of good quality not yet put in I'm waiting for the tools to dismantle the engine, I hope it will serve . consistent with the description elegantly packaged, no factory damage to the chain . I am satisfied .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-02-05, 18:32
Mateusz
My machine is a 1982 ROMET OGAR 205 with a capacity of 50cc. The filter fit very well, it fits perfectly with the frame of the motorcycle. The filter immediately after installation began to catch impurities from the tank. Goods as highly recommended.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-09-13, 21:08
jerzy
Super case company reliable and fast shipping I highly praise this company and highly recommend. I am satisfied as much as possible with everything I bought everything fits barton ranger clasic motorcycle
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-09, 11:33
Monika
Simering Shaft Sealer left19.8x30x5 for 4t scooter very good quality with attention to detail it is worth replacing when overhauling the engine I recommend to everyone fits without any problem
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-10-19, 08:09
Zbigniew
Hello I have a moped brand chopper kingway 110ccm registered for 50ccm the installation of the filter went through without any major problems I recommend to anyone for dirty tanks :)
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-09, 11:06
Monika
Clutch jaw springs gy6 4t tiuning 9pcs very good quality materials very warzna case of tuning in scooter I recommend to everyone fits without any problem
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-06-23, 18:59
Jakub
The bulb, like a bulb, shines, even very well. When driving at night it illuminates the whole road well, the color is rather yellow, in my classic it looks great.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-03-18, 09:39
Mateusz
I recommend the carburetor I purchased the product received as expected I also add that the product is very well protected I recommend Gmoto.pl
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-05-17, 09:28
Marcin
The coil does its job however the cable is a little too long for the Honda Dio but it's supposed to be a universal product so no surprises there
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 12:13
Monika
4t 80ccm camshaft very good quality bearings very well made with attention to detail fits without any problem recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-09-18, 07:22
Richard
Ebonite carburettor washer with GY6 4T O-ring has not been installed, as the pipe is the wrong size
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-26, 17:36
Monika
Foot starter wheel 8 teeth 4t very well made with attention to detail with high quality materials recommend to all
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-03-04, 20:05
paweł
Ogar 200 everything fits perfectly super contact with the supplier fast delivery what about complaints I don't know because there was no need 11 out of 10
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-20, 15:30
Paweł
I have a moped dafier yankee 50cm product very well made and the starter relay works 100 percent in the moped
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 13:37
Monika
Variator kpl with outer disc Gy6 4t very well made with attention to detail fits without any problem I recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-09, 10:00
Monika
Complete 4t carburetor very good quality with attention to detail fits without any problem recommend to everyone fits 4t scooter
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-08-12, 20:48
Andrzej
Tgb orion 125 engine gy6 year2002 mileage 22000. filter for gasoline ok can safely take next time I will buy it again
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 08:52
Monika
Clutch bell kopl 4T very well made with attention to detail fits without any problem to 4T scooter I recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-09, 09:54
Monika
Simering Right Shaft Seal 16.4x30x5 gy6 4t very good quality material fits without any problem I recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-07-27, 09:42
Mykhailo
Everything fits rides faster The scooter got new life and power. I recommend It fulfills its purpose thank you very much .
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-03-26, 16:57
Monika
Starter shaft fits 4t scooters very good quality materials with attention to detail recommend to all
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-09, 10:43
Monika
Variator set with outer disc gy6 4t very good quality materials fit without any problem recommend to everyone
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 12:01
Monika
Gy6 4T timing chain very well made with attention to detail fits without any problem recommend for 4t scooter
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 07:17
Monika
Complete 4T carburetor very well made with attention to detail fits without any problem to 4T scooter I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-09, 08:12
Monika
Gy6 4t timing chain very good quality material fits without any problem I recommend to everyone to 4t scooter
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2020-04-27, 22:16
Mikołaj
WSK M06 B3 "Hunchback" 1975, bulb like original from those years! :-) They shine well and replacement hassle-free.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-01-08, 13:40
Monika
Clutch bell kpl 4t very well made with attention to detail fits without a problem recommend to all
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-10-18, 16:28
Jakub
Chinese scooter torq 80ccm 2016. Chain well made, perfectly tight, spins until nice. I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-06-14, 22:02
Marek
Kingway Fonero 50 year of production 2007 The carburetor I recently purchased passed my expectations I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2018-11-26, 23:02
Mateusz
Motomar Vision 2009r 50ccm3 series .Purchased a carburetor in full working well everything is back to normal scooter stands in the cold after a few days after which it starts without a problem. The only thing is that the slow speed screw at the throttle has a ball end, which is not quite right, but it can be trimmed or replaced with another. Other than that, everything is fully well-fitted installation did not cause any problems and after a long spin the scooter started very nicely.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2021-07-07, 03:00
JanD
Moped - Barton Fighter Eco 2020 The store's merchandise filter specified as if this pad would fit my machine. It does not fit!!! The main hole is 3.5 mm too small, and worse, the spacing of the screws is also strongly too small. I had an emergency situation and sanded the holes to my needs provisionally. But I am disappointed. For 139FMB engines, GMoto does not carry ebonite washers, despite the fact that these are the most common moped engines in Poland. And I see in the previous comments that this is nothing new.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2017-09-11, 17:32
Abramowicz
Zipp G2 Toros F16 - installation went without any problems parts fit perfectly and as for the appearance and aesthetics of the workmanship is good although parts for these vehicles are made with not the greatest care. This was not the first time I bought parts on Gmoto.pl I buy here every time, not only scooter parts but also parts for cars and there is no problem with the assembly, fit and rapid wear of these parts and I am satisfied.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-06, 11:58
Kamil
Unfortunately, as for this filter, the quality of the material is not at a satisfactory level, unless you measure yourself the correct lengths of the hose beforehand, put on the filter and do not move. When trying to remove the cable (by circling) one of the fuel hose connections broke off. It is possible that I got a defective piece, but there is no certainty. Here, unfortunately, I can not recommend the product.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2019-02-18, 23:01
SYLWESTER
Hello I have a scooter brand kingway fox 50 2009r 50ccm the problem was with the old carburetor so I bought a new one from (gmoto) packed solidly, the carburetor itself at first glance looked okay performance good, the very assembly ran very easily just plug in the hose with fuel and gas line, twist on the bands and you can continue to chulkać on the motorcycle I recommend
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-05-31, 14:38
Jacek
I am satisfied with the product I think it is very well made works perfectly without unnecessary vibration. You can feel the difference from the cheapies that other companies offer. The price is affordable I recommend. Also Gmoto company is trustworthy I have already bought many products and will continue to buy. So you should go to Gmoto website and see their products I recommend.
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion
2024-07-04, 02:12
KAMIL
I made several purchases from the seller on that day. I am very impressed by the professionalism and friendly service. Of course, the goods one hundred percent as described but also of high quality, and on top of that the prices are really great. I already know that this will be my store permanently. And I recommend it to everyone from the bottom of my heart. See you on the road
Review translated automatically
-
Esthetics:
-
Material quality:
-
Fitting:
Reliable opinion



































