Forgot password
Order status
Free delivery from 150 euro
![Tourmax 7.5 [2.45mm] valve plate.](https://img.gmoto.pl/12305/plytka-zaworowa-sr-75x245mm_1_m2.webp)
Options +2 
Browse by manufacturer
Products reviews
I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.
Review translated automatically
Reliable opinion
Honda Africa Twin XRV 750 1999. The piston fits the calipers on older models, the pistons for my motorcycle are 3mm shorter. I ordered the set with the idea of shortening it. The material turned out to be soft compared to the original(this does not prove its strength, therefore the rating of 3 from the quality), cutting 3mm on the lathe did not overheat the pad and after protecting it on the turning side with an appropriate specific will ensure that it will not lose its anti-corrosion properties. A perfect replacement for the twice more expensive original. The width agrees, the quality of the seals seems to be OK, after installation it does its job - I recommend.
Review translated automatically
Reliable opinion
Mounting pin, fitted very well to the fairing of a Yamaha fz 8 motorcycle. The transaction went smoothly, fast delivery.
Review translated automatically
Reliable opinion
Used for a complete rebuild of my caliper, the piston is the same as the original. I recommend
Review translated automatically
Reliable opinion
The GS 500 motorcycle is a machine that I use every day. It gets no concessionary fare and has to endure all sorts of roads. Sometimes fast riding on the expressway, sometimes touring on rough and bumpy roads. The result of this effort is a broken head frame bearing, which bravely endured all the forces acting on the motorcycle. It was time for a bearing from the proven Tourmax company, which I got very quickly thanks to the Gmoto.pl store. The package came quickly, well packed. Goods of the highest quality. Since the replacement of the bearing nothing has happened to the motorcycle and you can confidently continue the season.
Review translated automatically
Reliable opinion
Good day some time ago I purchased a 1985 Suzuki RM 125, the motorcycle is already a vintage and there is a slight problem with parts fortunately managed to find. I purchased a water pump reperaturka I did not think it would work, but nevertheless for a wannabe nothing difficult is a big time saver than to order a part for example from some foreign sites. Reperaturka itself is made very well ideal quality and affordable price. I highly recommend it is always a time saver!!! Warm greetings Kacper
Review translated automatically
Reliable opinion
Voltage regulator made of good materials, fits perfectly and also perfectly performs its function. I have been using it for some time now, it works flawlessly, so I can confidently and in good conscience recommend it to others who are interested. I really recommend it.
Review translated automatically
Reliable opinion
Good morning, I was looking everywhere for this particular replacement, but I only found it in this store. I am very happy with the quality of the product in relation to the price. It's worth it and more.
Review translated automatically
Reliable opinion
Seemingly just a pin however, it allows even a 20 year old motorcycle to retain its original appearance. They do not differ in appearance and quality at all from those originally used for the installation of fairings in my 2000 Hayabusa.
Review translated automatically
Reliable opinion
Honda XL 125 Varadero year 2006. fairing mounting pin fits perfectly, made very solidly, made of strong plastic material. Matched very well to the original, virtually indistinguishable.
Review translated automatically
Reliable opinion
The part is of very good quality, comparable to the original, everything fits as it should, works flawlessly, you can confidently drive a few seasons without looking, doing an average of up to 10,000 km per season
Review translated automatically
Reliable opinion
The pins fit the rump (including the plastic filling for the tail lamp) on the Suzuki SV650n K8. They perfectly replace the lost originals - there is no play, they do not fall out and do not break in the hands.
Review translated automatically
Reliable opinion
VARADERO XL 1000 SD01 99r. Very good quality fuel pump repair kit. The installation went without any problems. Very good fit of the parts. I recommend the manufacturer and seller.
Review translated automatically
Reliable opinion
The motorcycle is a Honda Transalp XL 600 The piston holds the dimension perfectly in every plane. The only difference is the different shape of the bottom of the piston, but this does not seem to affect the operation.
Review translated automatically
Reliable opinion
Honda Varadero 125 2007r (polift) The pin looks and fits the same literally dot to dot as the original. So I confidently recommend the more that the price is better than in ASO
Review translated automatically
Reliable opinion
Fits perfectly, should be added to the oil refinisher, the cost is pennies and most often the protection is already affected by corrosion and suitable for replacement
Review translated automatically
Reliable opinion
Everything ok, the pin fits nicely and holds the fairing well, even after several times of removing the fairing and driving several thousand kilometers everything holds HONDA CBR F4 2000r.
Review translated automatically
Reliable opinion
The bearings fit very well to the frame head from a 93r gsxr 750 well made And I'm surprised the garland is metal because the previous ones I had had a plastic one
Review translated automatically
Reliable opinion
The motorcycle is a honda transalp 600 1996r.The element fit perfectly without any reservations thanks to good workmanship and fit the repair went quickly and efficiently.Regards
Review translated automatically
Reliable opinion
Excellent product. It fit properly in the caliper and I no longer have any leakage from the wear and tear of the previous one. Tourmax quality comparable to the factory ones.
Review translated automatically
Reliable opinion
Very solid bearings, all metal, tightly fitted to the post, smooth operation, workmanship 10/10, , "made in Japan" speaks for itself.
Review translated automatically
Reliable opinion
Great quality replacement, the previous protection totally corroded, I hope this will live a little. I replaced it on a DR 650 SE vintage 1996
Review translated automatically
Reliable opinion
yamaha diversion 600 2002 element purchased really good quality,without any problems installed in the shin of the front suspension recommend kind regards lwg
Review translated automatically
Reliable opinion
Yamaha FJR 1300, vintage 2009, the product does not differ in any way from the original or that purchased from the service. The price for it is dramatically different.
Review translated automatically
Reliable opinion
Yamaha FJR 1300, vintage 2009, the product does not differ in any way from the original or that purchased from the service. The price for it is dramatically different.
Review translated automatically
Reliable opinion
Perfect, I used it to rebuild the corresponding master cylinder. Quality parts, perfectly in line with the original. (DR800 S)
Review translated automatically
Reliable opinion
Super bearing, the ciera now turns as it should, when hammering, it is better not to hit the cage because it can break down which almost happened to me 4/5
Review translated automatically
Reliable opinion
I am satisfied everything efficiently and according to what I ordered. The ordered goods meet my expectations. I positively evaluate this store.
Review translated automatically
Reliable opinion
standard part processing lightweight black plastic worse possibility of disconnection ideally if it could be seen how it looks after and before insertion and use.
Review translated automatically
Reliable opinion
Yamaha xj 900 from 1999. Oil seals as well as dust caps of good quality. Installation without any problems. Recommended product.
Review translated automatically
Reliable opinion
Good product delivered quickly. I searched for a while to avoid spending so much and found what I was looking for at GMOTO. That's how it should be.
Review translated automatically
Reliable opinion
The gaskets fit perfectly, finally dry at the fluid reservoirs, I recommend. As always shopping at Gmoto fast and efficient.
Review translated automatically
Reliable opinion
Purchase made for a motorcycle. The product corresponds to my expectations. Very good value for money. I recommend this product.
Review translated automatically
Reliable opinion
My second order from Gmoto and everything went smoothly from order to delivery. I will certainly recommend!!!!
Review translated automatically
Reliable opinion
I am super happy with what I have bought Everything works as it should so it runs fine now Good quality works as it should
Review translated automatically
Reliable opinion
Easy to fit in place of the old one, looks and feels identical to the original.
Review translated automatically
Reliable opinion
Yamaha xvz12TD. Everything fits. The old ones unfortunately corroded. Thank you. I will definitely come back to you.
Review translated automatically
Reliable opinion
Delivered as ordered. Everything in order. I would order from GMoto again. It is a reliable supplier.
Review translated automatically
Reliable opinion
Kawasaki ER 5 1996 year, the valve as factory, performs its function. You can see that it is of very good quality. I recommend
Review translated automatically
Reliable opinion
Recommended. 100% satisfaction. Full compatibility. Fast delivery, seamless transaction. Thank you and best regards.
Review translated automatically
Reliable opinion
We have Motorcycle parts to Suzuki AN 400 Burgman
- Suzuki AN 400 A Burgman ABS 2012
- Suzuki AN 400 ZA Burgman ABS 2012
- Suzuki AN 400 Burgman 2002
- Suzuki AN 400 Burgman 2008
- Suzuki AN 400 Z Burgman 2007
- Suzuki AN 400 Z Burgman 2008
- Suzuki AN 400 A Burgman ABS 2009
- Suzuki AN 400 ZA Burgman ABS 2009
- Suzuki AN 400 Burgman 2009
- Suzuki AN 400 Burgman 2010
- Suzuki AN 400 A Burgman ABS 2010
- Suzuki AN 400 ZA Burgman ABS 2010
- Suzuki AN 400 Burgman 2011
- Suzuki AN 400 A Burgman ABS 2011
- Suzuki AN 400 ZA Burgman ABS 2011
- Suzuki AN 400 Burgman 2013
- Suzuki AN 400 Burgman 2012
- Suzuki AN 400 Burgman 2014
- Suzuki AN 400 Burgman 2015
- Suzuki AN 400 Burgman 2016
- Suzuki AN 400 A Burgman ABS 2013
- Suzuki AN 400 A Burgman ABS 2014
- Suzuki AN 400 A Burgman ABS 2015
- Suzuki AN 400 A Burgman ABS 2016
- Suzuki AN 400 A Burgman ABS 2017
- Suzuki AN 400 ZA Burgman ABS 2013
- Suzuki AN 400 ZA Burgman ABS 2014
- Suzuki AN 400 ZA Burgman ABS 2015
- Suzuki AN 400 ZA Burgman ABS 2016
- Suzuki AN 400 A Burgman ABS 2020
- Suzuki AN 400 Burgman 1999
- Suzuki AN 400 Burgman 2000
- Suzuki AN 400 Burgman 2001
- Suzuki AN 400 Burgman 2003
- Suzuki AN 400 Burgman 2004
- Suzuki AN 400 Burgman 2005
- Suzuki AN 400 Burgman 2006
- Suzuki AN 400 Burgman 2007
- Suzuki AN 400 S Burgman 2005
- Suzuki AN 400 S Burgman 2006
- Suzuki AN 400 A Burgman ABS 2021
- Suzuki AN 400 A Burgman ABS 2018
- Suzuki AN 400 A Burgman ABS 2019
- Suzuki AN 400 R Burgman 2000
- Suzuki AN 400 R Burgman 2001
- Suzuki AN 400 R Burgman 2002
- Suzuki AN 400 Burgman ABS 2022
- Suzuki AN 400 Burgman ABS 2023