Motorcycle parts
Suzuki AN 650 L Burgman Executive 2003 - Page 3

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2018-11-12, 15:59

View original

Krzysztof

Honda Africa Twin XRV 750 1999. The piston fits the calipers on older models, the pistons for my motorcycle are 3mm shorter. I ordered the set with the idea of shortening it. The material turned out to be soft compared to the original(this does not prove its strength, therefore the rating of 3 from the quality), cutting 3mm on the lathe did not overheat the pad and after protecting it on the turning side with an appropriate specific will ensure that it will not lose its anti-corrosion properties. A perfect replacement for the twice more expensive original. The width agrees, the quality of the seals seems to be OK, after installation it does its job - I recommend.

Review translated automatically

Reliable opinion

2018-03-18, 13:50

View original

Rybson

Suzuki GSR 600 - 2007 This is the first time I purchased an oil filter from K&N, previously I used hiflo. I suggested reviews but was convinced by a video comparing the inside of the filter It's nice that there is a "nut" as standard, which will certainly make it easier to unscrew at the next replacement We'll see after the season if it was worth paying the extra few zlotys

Review translated automatically

Reliable opinion

2019-01-12, 09:03

View original

Andrzej

Honda Cbf 500 2007. Sealers very good quality . Hassle-free installation. You can see at a glance that it is an original product of Athena.Oil burning I have already.I recommend.

Review translated automatically

Reliable opinion

2019-06-03, 17:02

View original

Gabriel

Hello I own a Suzuli DL 1000 V Strom 2005.The filter is of very good quality,the installation went very quickly and smoothly,the product is 200% recommendable.

Review translated automatically

Reliable opinion

2018-12-20, 22:20

View original

Hubert

I am using this filter for the next time and it has not let me down yet. Very good solution with the key nut no extra wrenches needed for filters.

Review translated automatically

Reliable opinion

2020-06-03, 11:54

View original

Adrian

Mounting pin, fitted very well to the fairing of a Yamaha fz 8 motorcycle. The transaction went smoothly, fast delivery.

Review translated automatically

Reliable opinion

2024-09-20, 12:04

View original

Aurélien

Used for a complete rebuild of my caliper, the piston is the same as the original. I recommend

Review translated automatically

Reliable opinion

2019-03-31, 12:52

View original

Michał

The GS 500 motorcycle is a machine that I use every day. It gets no concessionary fare and has to endure all sorts of roads. Sometimes fast riding on the expressway, sometimes touring on rough and bumpy roads. The result of this effort is a broken head frame bearing, which bravely endured all the forces acting on the motorcycle. It was time for a bearing from the proven Tourmax company, which I got very quickly thanks to the Gmoto.pl store. The package came quickly, well packed. Goods of the highest quality. Since the replacement of the bearing nothing has happened to the motorcycle and you can confidently continue the season.

Review translated automatically

Reliable opinion

2022-02-17, 17:08

View original

Kacper

Good day some time ago I purchased a 1985 Suzuki RM 125, the motorcycle is already a vintage and there is a slight problem with parts fortunately managed to find. I purchased a water pump reperaturka I did not think it would work, but nevertheless for a wannabe nothing difficult is a big time saver than to order a part for example from some foreign sites. Reperaturka itself is made very well ideal quality and affordable price. I highly recommend it is always a time saver!!! Warm greetings Kacper

Review translated automatically

Reliable opinion

2023-05-24, 21:04

View original

Dariusz

very good product,easy to install,app to download,connects to your phone via blue tooth and you have everything on the screen of your phone,like charging current,battery condition,monitoring its performance and so on,very useful thing,highly recommend in good conscience

Review translated automatically

Reliable opinion

2022-01-18, 10:25

View original

Matecki

Suzuki RM 250 1993.The products ordered from you always match the description, so the installation goes smoothly because everything is matched to the right motorcycle.I am satisfied with the cooperation with Gmoto. It is not the first year we have worked together and I rate the company and the website at 5. Best regards Matecki.

Review translated automatically

Reliable opinion

2017-07-11, 09:59

View original

Mariusz

I am a happy owner of a yamaha yzf 125r in which I recently noticed oil loss , I replaced the valve seals which I ordered from gmoto and I am very satisfied , solidly made . Easy to install and fit to my 2010r modelj recommend to everyone.

Review translated automatically

Reliable opinion

2017-07-11, 09:59

View original

Mariusz

I am a happy owner of a yamaha yzf 125r in which I recently noticed oil loss , I replaced the valve seals which I ordered from gmoto and I am very satisfied , solidly made . Easy to install and fit to my 2010r model I recommend to everyone.

Review translated automatically

Reliable opinion

2018-03-23, 07:30

View original

Krzysztof

A solid, branded filter, for reasonable money. K&N filters use both in the car and motorcycle, I have never yet been disappointed with this brand. For the engine it provides safety and comfort, and for the owner - holy peace of mind. I sincerely recommend.

Review translated automatically

Reliable opinion

2024-05-17, 13:20

View original

Jakub

The first time I pulled such a filter with a socket - a fantastic thing. It goes smoothly and with any wrench pulls the filter - I immediately bought the same. Hiflo brand used with me for several seasons - zero problems with installation or removal.

Review translated automatically

Reliable opinion

2024-07-05, 07:20

View original

Wojciech

K&N even if hidden under the collectors, improves the mood. It's like with Ray ban glasses others also darken, but it's not the same;) The filter works, fulfills its role and in addition improves the mood of the owner ;) Greetings

Review translated automatically

Reliable opinion

2024-09-20, 06:29

View original

Alexandros

Good morning, I was looking everywhere for this particular replacement, but I only found it in this store. I am very happy with the quality of the product in relation to the price. It's worth it and more.

Review translated automatically

Reliable opinion

2021-02-09, 10:48

View original

Marcin

Seemingly just a pin however, it allows even a 20 year old motorcycle to retain its original appearance. They do not differ in appearance and quality at all from those originally used for the installation of fairings in my 2000 Hayabusa.

Review translated automatically

Reliable opinion

2022-01-27, 10:50

View original

Sławomir

The pins fit the rump (including the plastic filling for the tail lamp) on the Suzuki SV650n K8. They perfectly replace the lost originals - there is no play, they do not fall out and do not break in the hands.

Review translated automatically

Reliable opinion

2021-03-20, 11:29

View original

Bartosz

The motorcycle is a Honda Transalp XL 600 The piston holds the dimension perfectly in every plane. The only difference is the different shape of the bottom of the piston, but this does not seem to affect the operation.

Review translated automatically

Reliable opinion

2022-03-10, 17:15

View original

Kamil

Very cool idea with the possibility of unscrewing with an ordinary wrench , not all filters have such a possibility , in some motorcycles it makes the replacement very easy .I recommend !!!

Review translated automatically

Reliable opinion

2019-06-10, 20:27

View original

Wojciech

Fits perfectly, should be added to the oil refinisher, the cost is pennies and most often the protection is already affected by corrosion and suitable for replacement

Review translated automatically

Reliable opinion

2017-07-15, 03:51

View original

Gixxer

The bearings fit very well to the frame head from a 93r gsxr 750 well made And I'm surprised the garland is metal because the previous ones I had had a plastic one

Review translated automatically

Reliable opinion

2021-07-25, 10:42

View original

Karol

Kawasaki KX 91r good workmanship simple installation without any problems it was hard to find sealers is such an old motorcycle but these fit perfectly. I recommend.

Review translated automatically

Reliable opinion

2025-04-13, 11:27

View original

NIKOS

Excellent product. It fit properly in the caliper and I no longer have any leakage from the wear and tear of the previous one. Tourmax quality comparable to the factory ones.

Review translated automatically

Reliable opinion

2024-07-05, 06:46

View original

Krzysztof

Great quality replacement, the previous protection totally corroded, I hope this will live a little. I replaced it on a DR 650 SE vintage 1996

Review translated automatically

Reliable opinion

2024-07-29, 06:37

View original

Bartosz

Very solid bearings, all metal, tightly fitted to the post, smooth operation, workmanship 10/10, , "made in Japan" speaks for itself.

Review translated automatically

Reliable opinion

2020-06-01, 17:53

View original

mariusz

yamaha diversion 600 2002 element purchased really good quality,without any problems installed in the shin of the front suspension recommend kind regards lwg

Review translated automatically

Reliable opinion

2020-11-17, 09:25

View original

Jacek

Yamaha FJR 1300, vintage 2009, the product does not differ in any way from the original or that purchased from the service. The price for it is dramatically different.

Review translated automatically

Reliable opinion

2023-11-06, 15:55

View original

Bartłomiej

Super bearing, the ciera now turns as it should, when hammering, it is better not to hit the cage because it can break down which almost happened to me 4/5

Review translated automatically

Reliable opinion

2020-06-08, 10:06

View original

Łukasz

I am satisfied everything efficiently and according to what I ordered. The ordered goods meet my expectations. I positively evaluate this store.

Review translated automatically

Reliable opinion

2022-04-11, 15:45

View original

Andrzej

Suzuki VL 800 Very simple filter change and that's about it. In operation it seems to do everything right, that is, it filters the oil as it should.

Review translated automatically

Reliable opinion

2024-09-19, 08:42

View original

jan

standard part processing lightweight black plastic worse possibility of disconnection ideally if it could be seen how it looks after and before insertion and use.

Review translated automatically

Reliable opinion

2019-02-17, 10:15

View original

Andrzej

Yamaha xj 900 from 1999. Oil seals as well as dust caps of good quality. Installation without any problems. Recommended product.

Review translated automatically

Reliable opinion

2024-07-15, 17:20

View original

Karolina

Very good quality product. Fits 97r Suzuki Bandit 600 motorcycle. I recommend this store to everyone, see you on the road!

Review translated automatically

Reliable opinion

2025-07-27, 08:46

View original

Eckehard

Good product delivered quickly. I searched for a while to avoid spending so much and found what I was looking for at GMOTO. That's how it should be.

Review translated automatically

Reliable opinion

2025-01-24, 08:41

View original

Thomas-billot

Purchase made for a motorcycle. The product corresponds to my expectations. Very good value for money. I recommend this product.

Review translated automatically

Reliable opinion

2020-11-07, 21:27

View original

Robert

Yamaha xvz12TD. Everything fits. The old ones unfortunately corroded. Thank you. I will definitely come back to you.

Review translated automatically

Reliable opinion

2024-12-10, 10:09

View original

Bernhard

Fast and reliable processing. Prices ok. Communication with the seller is professional and prompt.

Review translated automatically

Reliable opinion