Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Suzuki GSF 650 Bandit 2005
Manufacturer
Price
Sort
Browse by manufacturer
Products reviews
I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.
Review translated automatically
Reliable opinion
Mounting pin, fitted very well to the fairing of a Yamaha fz 8 motorcycle. The transaction went smoothly, fast delivery.
Review translated automatically
Reliable opinion
The GS 500 motorcycle is a machine that I use every day. It gets no concessionary fare and has to endure all sorts of roads. Sometimes fast riding on the expressway, sometimes touring on rough and bumpy roads. The result of this effort is a broken head frame bearing, which bravely endured all the forces acting on the motorcycle. It was time for a bearing from the proven Tourmax company, which I got very quickly thanks to the Gmoto.pl store. The package came quickly, well packed. Goods of the highest quality. Since the replacement of the bearing nothing has happened to the motorcycle and you can confidently continue the season.
Review translated automatically
Reliable opinion
Suzuki GSX-R 1100 motorcycle from 1987 . Due to its age I decided to replace the front master cylinder , searching through the offers I came across a repair kit at gmoto.pl and decided to purchase it along with the brake lever that works with the piston and may have been worn out . The parts after unpacking turned out to be not different in appearance and quality from the original with the included box of special grease . With the assembly there was no problem . All parts fit and work as intended .
Review translated automatically
Reliable opinion
I own a 2003 Suzuki DL 1000 motorcycle. Reperature of the front brake master cylinder I needed because it began to leak and go hard. The replacement is not difficult and the parts fit well. Even without instructions there are no problems to assemble everything correctly ;)
Review translated automatically
Reliable opinion
Seemingly just a pin however, it allows even a 20 year old motorcycle to retain its original appearance. They do not differ in appearance and quality at all from those originally used for the installation of fairings in my 2000 Hayabusa.
Review translated automatically
Reliable opinion
The pins fit the rump (including the plastic filling for the tail lamp) on the Suzuki SV650n K8. They perfectly replace the lost originals - there is no play, they do not fall out and do not break in the hands.
Review translated automatically
Reliable opinion
Very good kit, solidly and accurately made parts with high quality material, good fit allows you to assemble the clamp without any complications, I definitely recommend.
Review translated automatically
Reliable opinion
Exemplary fit head tube bearings. They have an additional seal, which will distinguish them from other bearings. Once installed, they fulfill their purpose 100%. Recommended.
Review translated automatically
Reliable opinion
Fits perfectly, should be added to the oil refinisher, the cost is pennies and most often the protection is already affected by corrosion and suitable for replacement
Review translated automatically
Reliable opinion
The bearings fit very well to the frame head from a 93r gsxr 750 well made And I'm surprised the garland is metal because the previous ones I had had a plastic one
Review translated automatically
Reliable opinion
Perfect rep kit, and it is a good quality, it is cheap compared to many others, Good delivery, well packaged, have bought from the company before and can only recommend them
Review translated automatically
Reliable opinion
Product ordered for my 1991 Suzuki 650, as described, mounts perfectly. Good quality caliper axle for the price.
Review translated automatically
Reliable opinion
Excellent product. It fit properly in the caliper and I no longer have any leakage from the wear and tear of the previous one. Tourmax quality comparable to the factory ones.
Review translated automatically
Reliable opinion
Great quality replacement, the previous protection totally corroded, I hope this will live a little. I replaced it on a DR 650 SE vintage 1996
Review translated automatically
Reliable opinion
Very solid bearings, all metal, tightly fitted to the post, smooth operation, workmanship 10/10, , "made in Japan" speaks for itself.
Review translated automatically
Reliable opinion
yamaha diversion 600 2002 element purchased really good quality,without any problems installed in the shin of the front suspension recommend kind regards lwg
Review translated automatically
Reliable opinion
I installed in suzuki hayabusa, parts fit well, high quality workmanship, the kit contains all the components for a comprehensive repair of the pump
Review translated automatically
Reliable opinion
Yamaha FJR 1300, vintage 2009, the product does not differ in any way from the original or that purchased from the service. The price for it is dramatically different.
Review translated automatically
Reliable opinion
Super bearing, the ciera now turns as it should, when hammering, it is better not to hit the cage because it can break down which almost happened to me 4/5
Review translated automatically
Reliable opinion
It was perfect. Product.that could not supply the official house i Gmoto if. The treatment and punctuality of the product was correct.
Review translated automatically
Reliable opinion
standard part processing lightweight black plastic worse possibility of disconnection ideally if it could be seen how it looks after and before insertion and use.
Review translated automatically
Reliable opinion
Yamaha xj 900 from 1999. Oil seals as well as dust caps of good quality. Installation without any problems. Recommended product.
Review translated automatically
Reliable opinion
Good product delivered quickly. I searched for a while to avoid spending so much and found what I was looking for at GMOTO. That's how it should be.
Review translated automatically
Reliable opinion
Very good replacement quality materials exceed the original. I bought both the clutch pump and the brake master cylinder. I recommend
Review translated automatically
Reliable opinion
I am super happy with what I have bought Everything works as it should so it runs fine now Good quality works as it should
Review translated automatically
Reliable opinion
Yamaha xvz12TD. Everything fits. The old ones unfortunately corroded. Thank you. I will definitely come back to you.
Review translated automatically
Reliable opinion
Delivered as ordered. Everything in order. I would order from GMoto again. It is a reliable supplier.
Review translated automatically
Reliable opinion
Kawasaki ER 5 1996 year, the valve as factory, performs its function. You can see that it is of very good quality. I recommend
Review translated automatically
Reliable opinion
Bearings of very good quality I order for the next timeideally fit the model selected in the search engine Gmoto.
Review translated automatically
Reliable opinion
Super service I got what I ordered in a very short time. Wish all companies were so honest. Greetings
Review translated automatically
Reliable opinion
The pin fits perfectly on the Suzuki DL650. The workmanship quality is very good. The plastic does not break or crack. I recommend
Review translated automatically
Reliable opinion
The valve visually identical to the original. Well packaged. Whether it does its job we will see after installation
Review translated automatically
Reliable opinion
The pin fits the body parts of Suzuki Dl 650 motorcycle year 2011, Fast shipping, available price. I recommend
Review translated automatically
Reliable opinion
Yamaha Xj 900 Diversion 2000r. tightly packed in bubble wrap. Transport fast. Overall a revelation
Review translated automatically
Reliable opinion
The clips are indistinguishable from the original ones fit perfectly and hold the plates on the bike very tightly
Review translated automatically
Reliable opinion
Suzuki GSXR 1100 year 1995.Kit fits everything ok,fast shipping overseas. I recommend the seller.
Review translated automatically
Reliable opinion
Yamaha Drag Star 1100 2007 year super stuff recommend !!!!!!!!!!!!!!!!
Review translated automatically
Reliable opinion
Quick to install simple to use Made of durable plastic
Review translated automatically
Reliable opinion
Other models of
- Suzuki GSF 650 S Bandit 2005
- Suzuki GSF 650 Bandit 2005
- Suzuki GSF 650 SA Bandit ABS 2005
- Suzuki GSF 650 SA Bandit ABS 2005
- Suzuki GSF 650 A Bandit ABS 2005
- Suzuki GSF 650 A Bandit ABS 2005
- Suzuki GSF 650 Bandit 2006
- Suzuki GSF 650 Bandit 2006
- Suzuki GSF 650 A Bandit ABS 2006
- Suzuki GSF 650 A Bandit ABS 2006
- Suzuki GSF 650 S Bandit 2006
- Suzuki GSF 650 SA Bandit ABS 2006
- Suzuki GSF 650 SA Bandit ABS 2006
- Suzuki GSF 650 SA Bandit ABS 2012
- Suzuki GSF 650 SA Bandit ABS 2012
- Suzuki GSF 650 SA Bandit ABS 2007
- Suzuki GSF 650 SA Bandit ABS 2007
- Suzuki GSF 650 A Bandit ABS 2007
- Suzuki GSF 650 A Bandit ABS 2007
- Suzuki GSF 650 A Bandit ABS 2008
- Suzuki GSF 650 A Bandit ABS 2008
- Suzuki GSF 650 SA Bandit ABS 2008
- Suzuki GSF 650 SA Bandit ABS 2008
- Suzuki GSF 650 Bandit 2007
- Suzuki GSF 650 Bandit 2008
- Suzuki GSF 650 Bandit 2007
- Suzuki GSF 650 Bandit 2008
- Suzuki GSF 650 S Bandit 2007
- Suzuki GSF 650 S Bandit 2008
- Suzuki GSF 650 S Bandit 2007
- Suzuki GSF 650 S Bandit 2008
- Suzuki GSF 650 SA Bandit ABS 2009
- Suzuki GSF 650 A Bandit ABS 2009
- Suzuki GSF 650 A Bandit ABS 2009
- Suzuki GSF 650 SA Bandit ABS 2009
- Suzuki GSF 650 A Bandit ABS 2010
- Suzuki GSF 650 A Bandit ABS 2010
- Suzuki GSF 650 SA Bandit ABS 2010
- Suzuki GSF 650 SA Bandit ABS 2010
- Suzuki GSF 650 Bandit 2009
- Suzuki GSF 650 Bandit 2009
- Suzuki GSF 650 S Bandit 2009
- Suzuki GSF 650 Bandit 2010
- Suzuki GSF 650 Bandit 2010
- Suzuki GSF 650 S Bandit 2010
- Suzuki GSF 650 S Bandit 2010
- Suzuki GSF 650 S Bandit 2008
- Suzuki GSF 650 S Bandit 2009
- Suzuki GSF 650 A Bandit ABS 2011
- Suzuki GSF 650 A Bandit ABS 2011
- Suzuki GSF 650 SA Bandit ABS 2011
- Suzuki GSF 650 SA Bandit ABS 2011
- Suzuki GSF 650 Bandit 2011
- Suzuki GSF 650 Bandit 2012
- Suzuki GSF 650 A Bandit ABS 2012
- Suzuki GSF 650 S Bandit 2011
- Suzuki GSF 650 S Bandit 2012
- Suzuki GSF 650 S Bandit 2011
- Suzuki GSF 650 Bandit 2011
- Suzuki GSF 650 Bandit 2013
- Suzuki GSF 650 A Bandit ABS 2013
- Suzuki GSF 650 S Bandit 2013
- Suzuki GSF 650 S Bandit 2014
- Suzuki GSF 650 SA Bandit ABS 2013
- Suzuki GSF 650 SA Bandit ABS 2014
- Suzuki GSF 650 SA Bandit ABS 2015
- Suzuki GSF 650 SA Bandit ABS 2016
- Suzuki GSF 650 SA Bandit ABS 2013
- Suzuki GSF 650 SA Bandit ABS 2014
- Suzuki GSF 650 SA Bandit ABS 2015
- Suzuki GSF 650 SA Bandit ABS 2016
- Suzuki GSF 650 A Bandit ABS 2011
- Suzuki GSF 650 S Bandit 2005
- Suzuki GSF 650 S Bandit 2006