Motorcycle parts
Suzuki GSX-R 750 X 1986 - Page 4

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2021-05-31, 09:52

View original

Piotr

Yamaha TDM 850, 93r. Good quality seals, hassle-free installation, the product does its job as much as possible, the suspension sealed 0 oil leaks. And on top of that the price is wallet friendly.

Review translated automatically

Reliable opinion

2023-05-26, 14:22

View original

Szczepan

I cannot say enough good things about the spark plug I purchased. Its quality and durability are unquestionable. From the moment it was installed in my engine, I noticed an immediate improvement in performance and fuel burn. This is a product that does its job perfectly. In addition, its solid construction and careful workmanship are eye-catching. The reliability of this spark plug is invaluable, and I am pleased with the results it produces. I recommend it to everyone who wants optimal performance and reliability in their engine. This is one of the best investments you can make in the automotive field. Don't hesitate for a moment, reach for this spark plug and you won't be disappointed.

Review translated automatically

Reliable opinion

2019-03-31, 12:52

View original

Michał

The GS 500 motorcycle is a machine that I use every day. It gets no concessionary fare and has to endure all sorts of roads. Sometimes fast riding on the expressway, sometimes touring on rough and bumpy roads. The result of this effort is a broken head frame bearing, which bravely endured all the forces acting on the motorcycle. It was time for a bearing from the proven Tourmax company, which I got very quickly thanks to the Gmoto.pl store. The package came quickly, well packed. Goods of the highest quality. Since the replacement of the bearing nothing has happened to the motorcycle and you can confidently continue the season.

Review translated automatically

Reliable opinion

2017-05-15, 21:39

View original

Wiesław

Suzuki GSX-R 1100 motorcycle from 1987 . Due to its age I decided to replace the front master cylinder , searching through the offers I came across a repair kit at gmoto.pl and decided to purchase it along with the brake lever that works with the piston and may have been worn out . The parts after unpacking turned out to be not different in appearance and quality from the original with the included box of special grease . With the assembly there was no problem . All parts fit and work as intended .

Review translated automatically

Reliable opinion

2020-05-03, 00:23

View original

Maciej

Wsk 125 The frame is nice, you can't expect more from a plastic metallized one. It fits my wsk-i nicely. The only big minus is that it did not fit completely in the holes - I had to widen the holes with a drill both at the top and bottom. Other than that, installation was easy. I recommend the product for those who don't mind making up holes.

Review translated automatically

Reliable opinion

2020-06-06, 06:55

View original

TOMEK

Large selection of parts of good quality, despite the poor selection of some parts on my part with the exchange was not the slightest problem, quick and easy return form, in addition to the immediate telephone contact from the seller ! on the return. Professional approach to the customer! I recommend this store !!!

Review translated automatically

Reliable opinion

2021-05-08, 07:38

View original

Andrzej

Plastic license plate frame looks like a good chrome material I changed the plate because I became the owner of a Suzuki Intruder VL 125 2000 year all in all. Looks super material fine that's why the price very low ugly comes longer.

Review translated automatically

Reliable opinion

2017-11-04, 10:28

View original

Patryk

I own a 2003 Suzuki DL 1000 motorcycle. Reperature of the front brake master cylinder I needed because it began to leak and go hard. The replacement is not difficult and the parts fit well. Even without instructions there are no problems to assemble everything correctly ;)

Review translated automatically

Reliable opinion

2025-09-16, 08:57

View original

Fermín

I chose this brand for being the best known and very good results for the bike. I put them on a classic SUZUKI GSX 600 F from 1989. The bike once put on, starts at the first time and without giving the starter sometimes, time will confirm if they are of very good quality.

Review translated automatically

Reliable opinion

2025-07-29, 08:36

View original

Félix

Quality spark plugs that mounted upon arrival and the operation is perfect. The shipment has been fast and secure, I live in Spain and I have before the expected delivery time. It is the second time I buy and I will continue to do so because it gives me guarantee the purchase.

Review translated automatically

Reliable opinion

2017-06-06, 06:57

View original

Piotr

The appearance of the dimensions as the original, it fits perfectly, one thing I would improve regarding the appearance is the NGK inscription either on both sides of the pipe, or on one the right side and on the other the left side with the inscription so that symmetrical in the motorcycle to the cylinders fit :)

Review translated automatically

Reliable opinion

2024-05-21, 06:33

View original

Błażej

I decided to order this candle just from Gmoto, because the store very decent and good quality workmanship. The candle fits very well without any problem I recommend, it is new nicely packaged product really recommendable.

Review translated automatically

Reliable opinion

2016-04-08, 12:10

View original

Krzysztof

I purchased this pipe for my Romet ws50.I have a Lifan 120 engine mounted with an oil cooler. The standard pipe was touching my lines from the adapter to the radiator.This one allowed me to move away from them. I am very pleased with it.

Review translated automatically

Reliable opinion

2025-02-21, 07:15

View original

Michael

Ordered full set of brake cables for my old Suzuki GSX 750 ES. They were not cheap, but the quality was really, really excellent. All cables had exactly the length they should have. 5 out of 5 stars!

Review translated automatically

Reliable opinion

2019-06-17, 07:58

View original

Damian

In the category of quality/price very nice frame. Strong plastic imitating chrome. Aesthetics at a high level. Lightweight and durable And the license plate enters on contact ( for me a plus because there is no slack). I recommend

Review translated automatically

Reliable opinion

2017-09-04, 10:25

View original

Mariusz

frame very nice, put on jawa ts 350 looks very good on this motorcycle, installation also very pleasant immediately changes the name of the motorcycle adds better charm

Review translated automatically

Reliable opinion

2021-05-15, 17:48

View original

Grzegorz

Honda CB 650 Custom, 1981. Pipe very good quality, aesthetic and solid. Admittedly, the NGK inscription is not white as in the photo, but it does not bother me. I recommend.

Review translated automatically

Reliable opinion

2024-09-25, 05:27

View original

Filip

Very good solution for those who want to replace the license plate frame with a new one. The price is very affordable. The quality of workmanship is also flawless. I can recommend

Review translated automatically

Reliable opinion

2019-06-17, 22:55

View original

artur

bmw cs 650, previously ordinary denso candle, now ngk iridium candle all great, made in japan, moto ignites better shorter starter turns although it is still fractions of a second.

Review translated automatically

Reliable opinion

2019-06-10, 20:27

View original

Wojciech

Fits perfectly, should be added to the oil refinisher, the cost is pennies and most often the protection is already affected by corrosion and suitable for replacement

Review translated automatically

Reliable opinion

2017-07-15, 03:51

View original

Gixxer

The bearings fit very well to the frame head from a 93r gsxr 750 well made And I'm surprised the garland is metal because the previous ones I had had a plastic one

Review translated automatically

Reliable opinion

2025-02-10, 08:33

View original

kim

Perfect rep kit, and it is a good quality, it is cheap compared to many others, Good delivery, well packaged, have bought from the company before and can only recommend them

Review translated automatically

Reliable opinion

2024-10-10, 15:35

View original

Ernst

Everything in perfect order, price / performance is absolutely okay! I can't give any details regarding function as the bike is still being assembled!!!

Review translated automatically

Reliable opinion

2025-04-13, 11:27

View original

NIKOS

Excellent product. It fit properly in the caliper and I no longer have any leakage from the wear and tear of the previous one. Tourmax quality comparable to the factory ones.

Review translated automatically

Reliable opinion

2024-09-21, 05:09

View original

Juha Sakari Rongas

Excellent product as well as delivery service response, I appreciate as well as thank you. More of the same level of service is needed. I will continue to use your services.

Review translated automatically

Reliable opinion

2024-07-29, 06:37

View original

Bartosz

Very solid bearings, all metal, tightly fitted to the post, smooth operation, workmanship 10/10, , "made in Japan" speaks for itself.

Review translated automatically

Reliable opinion

2024-07-05, 06:46

View original

Krzysztof

Great quality replacement, the previous protection totally corroded, I hope this will live a little. I replaced it on a DR 650 SE vintage 1996

Review translated automatically

Reliable opinion

2020-06-01, 17:53

View original

mariusz

yamaha diversion 600 2002 element purchased really good quality,without any problems installed in the shin of the front suspension recommend kind regards lwg

Review translated automatically

Reliable opinion

2018-05-26, 07:30

View original

Piotr

I installed in suzuki hayabusa, parts fit well, high quality workmanship, the kit contains all the components for a comprehensive repair of the pump

Review translated automatically

Reliable opinion

2023-11-06, 15:55

View original

Bartłomiej

Super bearing, the ciera now turns as it should, when hammering, it is better not to hit the cage because it can break down which almost happened to me 4/5

Review translated automatically

Reliable opinion

2024-11-06, 12:29

View original

Motostodoła

Well-known company with good quality goods .I recommend the so-called -mucek pipe candle NGK . due also to price not only quality

Review translated automatically

Reliable opinion

2025-09-18, 10:04

View original

ΔΗΜΗΤΡΗΣ

It has nickel finish but its plastic, the article says metallic but thats wrong, if you want it for enduro bike or adv its not metallic

Review translated automatically

Reliable opinion

2024-11-16, 11:24

View original

Mike

Super happy with the Iridium candle. Runs perfectly with it. Price - performance hammer as usual from gmoto! I would buy again.

Review translated automatically

Reliable opinion

2019-02-17, 10:15

View original

Andrzej

Yamaha xj 900 from 1999. Oil seals as well as dust caps of good quality. Installation without any problems. Recommended product.

Review translated automatically

Reliable opinion

2018-04-17, 09:21

View original

Kamil

Kawasaki GPZ 500S. The plugs perform excellently, at both high and low speeds. Very easy to install and, above all, durable.

Review translated automatically

Reliable opinion

2018-05-07, 18:15

View original

Magdalena

WSK M6 B3 1982 Very good quality product easy to install. Fits perfectly, looks very good. Frame worth recommending.

Review translated automatically

Reliable opinion

2024-05-21, 20:40

View original

Mariusz

The sealer seems to be of good quality, I think it will serve well. It fits perfectly soon I will check it in the course of work.

Review translated automatically

Reliable opinion

2025-07-27, 08:46

View original

Eckehard

Good product delivered quickly. I searched for a while to avoid spending so much and found what I was looking for at GMOTO. That's how it should be.

Review translated automatically

Reliable opinion

2021-07-25, 10:10

View original

Karol

Motorcycle Kawasaki KX 125 91r super quality gaskets quick installation and no problems. Dry lags perform well recommend.

Review translated automatically

Reliable opinion