Motorcycle parts
Suzuki RGV 250 Gamma 1995 - Page 2

2020-06-13, 10:45

View original

tomasz

Hello! Some time ago I bought NGK BR9ECMIX spark plug and I would like to share my opinion with you. It is really great! I immediately noticed an improvement in the performance of my motorcycle: a little more power, lower combustion. I have already ridden 10 motoring hours on it and see no problems. It works the same as it did at the beginning, i.e. the motorcycle burns from a kick cold or warm, I have no problems with firing up. The improvement is huge compared to my old plug, where I had numerous problems with, for example, firing. It kept flooding the plug, so I decided to get an NGK iridium plug and all the problems disappeared. I can confidently recommend this product to anyone. Simply a revelation! Greetings

Reliable opinion

2017-05-15, 21:39

View original

Wiesław

Suzuki GSX-R 1100 motorcycle from 1987 . Due to its age I decided to replace the front master cylinder , searching through the offers I came across a repair kit at gmoto.pl and decided to purchase it along with the brake lever that works with the piston and may have been worn out . The parts after unpacking turned out to be not different in appearance and quality from the original with the included box of special grease . With the assembly there was no problem . All parts fit and work as intended .

Reliable opinion

2024-08-26, 21:39

View original

Bartłomiej Świątek

For the xj900 s Diversion 1996 model, the bearings fit at a glance. The motorcycle was assembled with this bearing. There has not been a test ride yet, but the handlebars on the jack work fine. The only drawback is that the race of the upper bearing protrudes slightly from the seat, but this should not cause a problem because there is a factory cover that covers the entire bearing.

Reliable opinion

2017-11-04, 10:28

View original

Patryk

I own a 2003 Suzuki DL 1000 motorcycle. Reperature of the front brake master cylinder I needed because it began to leak and go hard. The replacement is not difficult and the parts fit well. Even without instructions there are no problems to assemble everything correctly ;)

Reliable opinion

2024-09-20, 08:49

View original

Mateusz

I had previously put on a regular candle the motor had Firing problems after purchasing an iridium candle it started to run nicer and fire up most of all

Reliable opinion

2018-05-26, 07:30

View original

Piotr

I installed in suzuki hayabusa, parts fit well, high quality workmanship, the kit contains all the components for a comprehensive repair of the pump

Reliable opinion

2018-03-18, 08:22

View original

Jarosław

Suzuki Intruder 800, seals of good quality, all dimensions met, has been installing for years in various motorcycles, certainly not the last :)

Reliable opinion

2020-04-11, 08:48

View original

Bartosz

Yamaha TZR 125 4FL. Candle well packaged, electrode break was already set correctly. The motorcycle runs without problems, I recommend

Reliable opinion

2023-06-16, 06:50

View original

Marcin

Very good replacement quality materials exceed the original. I bought both the clutch pump and the brake master cylinder. I recommend

Reliable opinion

2021-06-28, 12:41

View original

Tomasz

Kawasaki VN 15 SE from 1991. A set of Athena 41x54x11 front suspension seals - they fit perfectly, like the original.

Reliable opinion

2021-05-03, 07:23

View original

Arkadiusz

Suzuki GSXR 1100 year 1995.Kit fits everything ok,fast shipping overseas. I recommend the seller.

Reliable opinion

2017-06-05, 09:57

View original

Krzysztof

Honda transalp 600 very good quality and fit. Goods as described. I recommend 100%.

Reliable opinion

2015-11-29, 09:09

View original

rwasyl

I have not yet had time to install, but the goods look flawless.

Reliable opinion