Forgot password
Order status
Free delivery from 150 euro
![Tourmax 7.5 [2.65mm] valve plate.](https://img.gmoto.pl/12312/plytka-zaworowa-sr-75x265mm_1_m2.webp)
Options +2 
Browse by manufacturer
Products reviews
I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.
Review translated automatically
Reliable opinion
Mounting pin, fitted very well to the fairing of a Yamaha fz 8 motorcycle. The transaction went smoothly, fast delivery.
Review translated automatically
Reliable opinion
The GS 500 motorcycle is a machine that I use every day. It gets no concessionary fare and has to endure all sorts of roads. Sometimes fast riding on the expressway, sometimes touring on rough and bumpy roads. The result of this effort is a broken head frame bearing, which bravely endured all the forces acting on the motorcycle. It was time for a bearing from the proven Tourmax company, which I got very quickly thanks to the Gmoto.pl store. The package came quickly, well packed. Goods of the highest quality. Since the replacement of the bearing nothing has happened to the motorcycle and you can confidently continue the season.
Review translated automatically
Reliable opinion
Good day some time ago I purchased a 1985 Suzuki RM 125, the motorcycle is already a vintage and there is a slight problem with parts fortunately managed to find. I purchased a water pump reperaturka I did not think it would work, but nevertheless for a wannabe nothing difficult is a big time saver than to order a part for example from some foreign sites. Reperaturka itself is made very well ideal quality and affordable price. I highly recommend it is always a time saver!!! Warm greetings Kacper
Review translated automatically
Reliable opinion
Sealers without complaint. In a rigid and secure package a set of sealers and covers for two leaguers. Assembly trivially easy (for those who like and have an idea of DIY and small repairs). The fit is perfect. So far zero problem and the lags work perfectly in combination with Motul 10W oil.
Review translated automatically
Reliable opinion
The kit contained all the components I needed to regenerate the calipers. The quality of the materials used was very good - how it will be with durability, time will tell, but I have good thoughts. All components fit the caliper, did not pose any problems during installation. I recommend.
Review translated automatically
Reliable opinion
My machine is an 86 Honda Shadow VT 1100 . Purchased parts were not dedicated for this vintage , so as a novice user I bought blind and surprisingly they fit . Installation was no problem and the material and workmanship flawless . G Moto and product on pistket . LWG .
Review translated automatically
Reliable opinion
The kit fits perfectly for SUZUKI VSTROM K7 without ABS as well as with ABS. A product of a reputable brand Tourmax, so you do not have to worry about covering more miles. Very well packaged. High quality rubber seals. RECOMMENDED!
Review translated automatically
Reliable opinion
Seemingly just a pin however, it allows even a 20 year old motorcycle to retain its original appearance. They do not differ in appearance and quality at all from those originally used for the installation of fairings in my 2000 Hayabusa.
Review translated automatically
Reliable opinion
The pins fit the rump (including the plastic filling for the tail lamp) on the Suzuki SV650n K8. They perfectly replace the lost originals - there is no play, they do not fall out and do not break in the hands.
Review translated automatically
Reliable opinion
The protections, compared to the old ones, are slightly wider, more rigid and more "expandable", which makes them fit perfectly into the groove in the lade blocking the sealers.
Review translated automatically
Reliable opinion
Exemplary fit head tube bearings. They have an additional seal, which will distinguish them from other bearings. Once installed, they fulfill their purpose 100%. Recommended.
Review translated automatically
Reliable opinion
The bearings fit very well to the frame head from a 93r gsxr 750 well made And I'm surprised the garland is metal because the previous ones I had had a plastic one
Review translated automatically
Reliable opinion
Great sealers, they fit nice and tight even though the lag was polished, so far only about 100km after replacement but no drop on the lag, I recommend
Review translated automatically
Reliable opinion
I own a Honda NT650V Deauville. The seals seem solid because of the 2 spring rings. The previous ones only had one such ring.
Review translated automatically
Reliable opinion
Very solid bearings, all metal, tightly fitted to the post, smooth operation, workmanship 10/10, , "made in Japan" speaks for itself.
Review translated automatically
Reliable opinion
Yamaha FJR 1300, vintage 2009, the product does not differ in any way from the original or that purchased from the service. The price for it is dramatically different.
Review translated automatically
Reliable opinion
Super bearing, the ciera now turns as it should, when hammering, it is better not to hit the cage because it can break down which almost happened to me 4/5
Review translated automatically
Reliable opinion
Sealers well made, there was no problem with the installation which indicates well-behaved parameters. Tight, oil no longer leaks.
Review translated automatically
Reliable opinion
Sealers very good quality not some cheap plastic. There are 2 springs on each sealer. Fast shipping. Recommended.
Review translated automatically
Reliable opinion
Product of good quality as always fast shipping art.I installed in Honda CB 750 Steven fifty degree of difficulty of installation 2/5 I recommend
Review translated automatically
Reliable opinion
The seals fit suzuki gsx600f. Finally stopped leaking from the suspension and its operation improved significantly. I recommend
Review translated automatically
Reliable opinion
Very good quality workmanship fit perfectly to the lags 2 sets mounted on Moto and miles fly nothing leaks.
Review translated automatically
Reliable opinion
Recommended. 100% satisfaction. Full compatibility. Fast delivery, seamless transaction. Thank you and best regards.
Review translated automatically
Reliable opinion
Honda nt650v deauville 1999. The set of shock seals fit perfectly, the installation was done without any problems.
Review translated automatically
Reliable opinion
Bearings of very good quality I order for the next timeideally fit the model selected in the search engine Gmoto.
Review translated automatically
Reliable opinion
The pin fits perfectly on the Suzuki DL650. The workmanship quality is very good. The plastic does not break or crack. I recommend
Review translated automatically
Reliable opinion
I own a motorcycle brand: Honda CB 500F 2013 material was well packed, fit and complete.
Review translated automatically
Reliable opinion
Product of very good quality, fit very good, fit the motorcycle for which it was recommended.
Review translated automatically
Reliable opinion
Product of very good quality, meets my expectations. No need to buy more expensive sealers.
Review translated automatically
Reliable opinion
The pin fits the body parts of Suzuki Dl 650 motorcycle year 2011, Fast shipping, available price. I recommend
Review translated automatically
Reliable opinion
The installed repair kit does its job. The pump works properly without the slightest objection.
Review translated automatically
Reliable opinion
CBR F3 600 fits, everything great! Hoods well shaped, rubber bdb quality. I sincerely recommend!
Review translated automatically
Reliable opinion
The set was delivered quickly, as described. Contact with sellers at the level. For my part, I recommend
Review translated automatically
Reliable opinion
The set matched 100% no iade in japan equals no iade in japan equals no i recommend 100% nothing to add nothing to add!!!!!!!!!!
Review translated automatically
Reliable opinion
Honda Varadero 125, parts fit, everything works as expected after installation, quality of goods good.
Review translated automatically
Reliable opinion
I own a 2013 Honda CB 500F motorcycle. the sealer fit, it was well packaged.
Review translated automatically
Reliable opinion
Quick to install simple to use Made of durable plastic
Review translated automatically
Reliable opinion
dl-650 v-strom - fits ok.
Review translated automatically
Reliable opinion
We have Motorcycle parts to Suzuki SFV 650 Gladius
- Suzuki SFV 650 A Gladius ABS 2012
- Suzuki SFV 650 Gladius 2011
- Suzuki SFV 650 Gladius 2009
- Suzuki SFV 650 A Gladius ABS 2009
- Suzuki SFV 650 A Gladius ABS 2010
- Suzuki SFV 650 Gladius 2010
- Suzuki SFV 650 A Gladius ABS 2011
- Suzuki SFV 650 Gladius 2012
- Suzuki SFV 650 Gladius 2013
- Suzuki SFV 650 Gladius 2014
- Suzuki SFV 650 Gladius 2015
- Suzuki SFV 650 A Gladius ABS 2013
- Suzuki SFV 650 A Gladius ABS 2014
- Suzuki SFV 650 A Gladius ABS 2015
- Suzuki SVF 650 Gladius 2016
- Suzuki SFV 650 A Gladius ABS 2016