Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
WFM M06 125
Manufacturer
Price
Sort
Options +2 
Browse by manufacturer
Products reviews
Greetings. I'm currently sitting so amateurishly on restoring the splendor of two 1969 WSK B1 motorcycles and a WSK Hunchback. In one and the other case I used the same pipes of wires, which aesthetically cool to fit the whole motorcycle. They fit in the assembly with the size of the wires, which is important if they are also to do a good job of insulating against, for example, muddy water. . I recommend
Review translated automatically
Reliable opinion
I bought this reflector for myself for a 2007 Yamaha Drag Star 650. I had a similar one before on my Intruder, so I decided to glue it here as well, not only for safety but also for beauty. I glued it on the rear of the passenger backrest. Made really precisely with convenient self-adhesive tape. The whole job two minutes, looks great, as if it was always there! Greetings Maciek
Review translated automatically
Reliable opinion
The new bushings are significantly smaller than the original. The length is: 39mm, while the old bushing was 70mm. Thickness at the narrowest point: 25mm, while in the old bushing it was 2.4mm. Thickness at the widest point: 30mm, and in the old bushing also 30mm The diameter of the hole is 20mm, and in the old bushing 1.8m. After being hammered into the rocker, the bushing works perfectly.
Review translated automatically
Reliable opinion
The lever handle is aesthetically pleasing, unfortunately the fit is poor as can be seen in the attached photo ,another downside is that it does not have screws for the claws and attaching to the handlebars. The handle also does not have the hole phase of the screw fixing to the steering wheel so that the original screws do not hide
Review translated automatically
Reliable opinion
WSK 125 1979. The design as original as possible. The material and fit at a high level. The execution of "holes" on the ends of the rubbers raises a little - I remember that the previous batch was made more aesthetically pleasing. On the big plus here I can point out the durability.
Review translated automatically
Reliable opinion
Warm welcome. WSK B1 from 1969. The pipes are made of good material, they insulate well, first of all from water, tightly concrete hold, the appearance also have a nice so oki. I recommend and greetings. Krzysztof
Review translated automatically
Reliable opinion
Thread reduction used to repair the Romet head, fits most of the communist vehicles, it is easy to repair the damaged head yourself, all you need is a drill and a threader of the right size.
Review translated automatically
Reliable opinion
WSK 125 B1 1969. Flapper made very well rubber soft and well laying perfectly fits the fender holes in place just had to unpack and screwed I highly RECOMMEND
Review translated automatically
Reliable opinion
To get it to go on the faucet well you need to heat as it is any fuel line, it fits as it has. Photo of my Romet Ogar 200 under restoration assembled on parts from Gmoto.pl :)
Review translated automatically
Reliable opinion
footrests made of hard steel covered with a nice zinc coating on the big minus unfortunately comes in crooked welded tube for rubber and too small hole because it does not fit the new foot axles
Review translated automatically
Reliable opinion
Hello bushings do not differ from the original I own a wfm 125 and restore it and przktycznini all parts I buy from you because you have the most and prices affordable
Review translated automatically
Reliable opinion
WSK 125 B1 Pipe like the original quality of rubber used at a high level very nicely processed just install and enjoy the product highly recommend
Review translated automatically
Reliable opinion
Fits perfectly, the material okey, a little shorter than the original, but it does not interfere with anything and everything works nicely. I recommend without hesitation.
Review translated automatically
Reliable opinion
WSK 125 1980. Material and aesthetics at a high level. Installation without any problems. Pipe fits perfectly, performs its function and looks good.
Review translated automatically
Reliable opinion
spring made of good steel, tightly coiled, compacted which results in good springing which in turn translates into good bouncing of the feet
Review translated automatically
Reliable opinion
WSK 125 1982. Quality of material and fit - exemplary. A little spoil the whole aesthetics of the side holes, but even this can be improved on its own.
Review translated automatically
Reliable opinion
The splash guard has not yet been installed, the plan is to use it for the SHL Gazelle M11 for the front fender. It looks like from the era
Review translated automatically
Reliable opinion
Yamaha xj600 Diversion . The splash pad used as an option passes the test. Looks great ,the second one I put on the shelf as a decoration.
Review translated automatically
Reliable opinion
Very satisfactory quality compared to the price. They fulfill their purpose 100% recommend highly. Successful purchase
Review translated automatically
Reliable opinion
WFM 125 M06 from 1961. Stencil consistent with the original. Used as a stencil. All ok, photo attached.
Review translated automatically
Reliable opinion
I got an yamaha xt350 of 1991. I am very glad with this item. Very good quality / price. Recomend it.
Review translated automatically
Reliable opinion
Hi. Goods of very good quality, the thread screws on without any problem. Shiny chrome adorns the entire regimen
Review translated automatically
Reliable opinion
This is the second time I used such a reduction. The first time as well as the second time it fit perfectly. I recommend!!!
Review translated automatically
Reliable opinion
Of course, the goods as much as possible to fit a motorcycle which is a WSK 125. The goods in the first term I received damaged (the hole for the cable was missing), but after filing a complaint, the staff ensured that they would send the goods complete, which is a big plus on their part ( in the second term the goods arrived complete and very quickly). I have no objection to discourage the purchase of this merchandise, so I recommend it, because in case of failure of the rope it saves and helps to get home efficiently.
Review translated automatically
Reliable opinion
Moped peda but made in China 2007 year 50 capacity. The product is too weak it let go after 30 min of riding. The hole for the cable was too small I had to enlarge and besides, the broken end of the cable will always be flared and with a larger diameter so you will not do it quickly on the street. I recommend buying a new cable and not playing with replacements. Replacing the cable will do in an hour if you have never done it and the cost is 20 - 30 zl. In the picture it is made of brass and they sent a different one.
Review translated automatically
Reliable opinion
WFM M-06 1960.A very practical thing, the quality of rubber and metal parts seems to be high. However, since the battery mounting bases are different, so different lengths of the battery mounting straps should be. This is not compensated for by the slight stretchiness of the rubber. On my motorcycle, there is a big problem with attaching the strap. Several sizes on offer would be ideal. It would also be helpful to specify to what maximum length the strap can be stretched.
Review translated automatically
Reliable opinion
I own Motorynka Romet Pony M-2 Motorcycle.The capacity of the engine is 49.8 cm, and the year of production is 1980.The product made in very good quality, I recommend to all buyers. I have already ordered Motorcycle parts from this store a couple of times, and not only for Motorynka, but for other Motorcycles too.I think that's enough, the products from this store I rate 100%.There were no delays with the shipment, or any complications, I recommend to all buyers!
Review translated automatically
Reliable opinion
The light switch surprised me with the quality of workmanship while the center (switch) does not stand out in any way, the switch housing itself makes the best impression, it is not some thin sheet that bends under your fingers. As far as I am concerned I would buy this interrupter again.
Review translated automatically
Reliable opinion
The front fender splash guard looks much better in reality than in the photo. The rubber is black with a slight sheen. Very carefully made there are no over lefts etc. The splash guard is dedicated to WSK but the shape allows you to use it for other motorcycles. I, after drilling holes in another place, put it on Benelli Imperiale 400 , it fits perfectly.
Review translated automatically
Reliable opinion
With a diameter of 6 mm and a length of 50 cm, the fuel line is a solidly manufactured component that ensures reliable fuel flow. Its flexibility makes it easy to install, and its fit with standard dimensions makes it a practical and universal solution. Thanks to it, you can be sure of the smooth operation of the fuel system, which positively affects the performance of the vehicle.
Review translated automatically
Reliable opinion
All well made, unfortunately I did not read carefully and it is not a pipe for a candle but a pipe for the installation at the ignition (I do not know how else to explain it) in any case, I bought with the idea that it would be a large pipe for a candle and it came a tiny one. Opinion obviously positive because the workmanship is very good and the mistake was on my side .
Review translated automatically
Reliable opinion
Perfect fit for WSK 175.No problems when putting it on, the battery holds rigidly, does not vibrate, does not jump, Nothing to add nothing to add. The only disadvantage of the belt is the aesthetics of the workmanship, because there are overlaps around the metal parts, but you can turn a blind eye to this. Just sit with the knife for a while and it will be ok, I recommend! :D
Review translated automatically
Reliable opinion
Bushings very solid to rometa kadet fit I bought more as if they died. I recommend the purchase and the store. I am surprised by the honesty of the store. I made an order then a second basket and they returned the cash and made in one order. The second situation with the lamp for rometa cheapened they removed the basket and made with a lower price. I recommend the store
Review translated automatically
Reliable opinion
The sleeve is nowhere near the sleeves coming out in the wsk. In a motorcycle wsk came out with a minimum diameter fi 10mm not threaded and in this case we have a roller furniture nut. This is the first time such a thing has happened to me since I have been shopping in this company. Complain nothing because it is not worth the trouble. Too little value.
Review translated automatically
Reliable opinion
I purchased a switch for a 1977 WSK 125 so-called humpback. It fits, works properly. Only the quality of surface preparation for the application of chrome leaves to be desired. There are visible scratches on the chrome surface of the switch. These are not scratches on the chrome surface so they are visible under the light.
Review translated automatically
Reliable opinion
Repairing Jawe 50 on gmoto you can count on, here you can buy everything you need, even every smallest detail such as brake bushings, etc. dealing with the overhaul of vintage mopeds or motorcycles there are parts that can not be repaired or is not worth it, and that is why gmoto is ok.
Review translated automatically
Reliable opinion
The ideal thing in a difficult situation when the thread of the plug is already leaking or completely broken. Without having to look for a new head (sometimes unobtainable or at a horrendous price) even in the garage having a stand drill you can repair the damage and continue to enjoy your oldtimer.
Review translated automatically
Reliable opinion
SHL M 11 The bushing has no dimensions, it is not suitable for anything. I do not understand why it is on offer if it does not fit? Hardly, it appears on many sites for various motorcycles and it is an exaggeration to put on the site Junak M10 M 07 where, after all, such a component in this motorcycle does not occur.
Review translated automatically
Reliable opinion
WSK 125 clutch worm is a key component of the drivetrain that ensures smooth and precise clutch operation. Solid workmanship and durability of this element guarantee reliability and safety during driving. I highly recommend it as an essential element for WSK 125 users.
Review translated automatically
Reliable opinion
The supplier showed professionalism regarding the preparation AND delivery of the shipment of parts for Junak M10. I was very impressed by the electronic notification system of the status of the order until delivery to the addressee. Very fast delivery and without courier.
Review translated automatically
Reliable opinion