Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Yamaha DT 50 L 2002-2003
Options +3 
Browse by manufacturer
Products reviews
I recommend this carburetor. I put on the Derbi everything perfectly for such a price. A very big advantage is the set of nozzles that comes in the box and you can adjust the carburetor.
Review translated automatically
Reliable opinion
I bought this cylinder as a replacement for the original one on my CPI SM 50 and it has really lived up to my expectations. The quality of the cylinder is impressive and I immediately noticed an improvement in engine performance. Description of the product: The cylinder is made of durable materials and is a perfect fit for the AM6 engine. With a bore diameter of 40.20 mm and a volume of 50 cm³, it is an ideal solution for those who want to keep their engine optimized without compromising on durability. Installation was simple, thanks to the precise fit and included installation instructions. Vehicle: I installed this cylinder on my 2006 CPI SM 50 You have to remember to take off the black gasket thingy though, I forgot to do that
Review translated automatically
Reliable opinion
Unexpectedly, this carburetor surprised me with its price/quality ratio. I expected a "lousy" product for this price, but as it turned out later it is simply great. My colleague also has this carburetor (Yamaha Aerox 70cc) and I (Aerox 70cc), which factory had a carburetor with a 12mm throttle and were not very eager to start nimbly, after installing a 21mm carburetor from Gmoto, which that one was very easy because the fit of the parts was very good, the motorcycle suddenly gained power and a lot of acceleration. A colleague has had this carburetor for about 3 months and nothing has broken down yet. I recommend this carburetor as much as possible, it is not worth overpaying for much more expensive carburetors, as this one is definitely made perfectly.
Review translated automatically
Reliable opinion
The quality of the carburetor is really nice. The carburetor nicely polished from the inside and there are no unwanted lint or other such damages and shortcomings. Additional nozzles for adjustment also very useful. What can I add in the description from myself ? One of the most important information about this gasifier. It has a semi-circular throttle and has power jet nozzles. What for inexperienced people can make it difficult to adjust :)
Review translated automatically
Reliable opinion
Fuck they are wonderful and incredible lis best bearings that e acquired never very good and very cheap fuck that last I am tremendously grateful for aver get some bearings of such good quality seriously you have to buy them future customers make me case everything that sn sold me works properly
Review translated automatically
Reliable opinion
The carburetor I ordered for a Kawasaki KLF 300 quad fits snugly, the only problem is the location of the gas line, as in the original it is on the side of the carburetor and in this case "from the top" and is a little too close to the tank, but a new gas line with a metal elbow solved the problem. The carburetor can also fit the Honda TRX
Review translated automatically
Reliable opinion
Zipp quantum gt5 2008r. The carburetor came the wrong one (I got it from simson), it's hard I needed it fast I didn't have time to send it back, after reworking the mount I put on the one I got it turned out that the cable mount is so delicate that the spring from the kit after putting it on ripped out the mount
Review translated automatically
Reliable opinion
It is the second time I buy. Not bad at all! (There was a mistake with a seal, in this second purchase ... but it is the least of it since I had new ones of that size. I got 3 crankshaft seals, the clutch seal, the transmission seal and I missed the one for the gearbox. Another one I have in stock !!!!
Review translated automatically
Reliable opinion
Aprilia rs50 98r- the quality of the gaskets is very poor, they do not fit (those from the cylinder) on the head, they are made of the cheapest rubber. I would advise you to withdraw this set from sale, because only the gasket under the clutch cover and between the cylinder and the carter fit, and the rest is suitable for trash :)
Review translated automatically
Reliable opinion
I ordered the carburetor for my 2009 Beta RR50 motorcycle, the fit of the carburetor to my bike is perfect. The carburetor worth the price even I would give more, the workmanship is good, and as for the aesthetics I would improve a little, the carburetor really performs great.
Review translated automatically
Reliable opinion
The carburetor comes very complete and with spare gums that facilitate the carburetion, I have not been able to get it to work but I do not know if it is a problem of the carburetor or the cylinder I have on. The purchase is reliable and the part seems to be of quality.
Review translated automatically
Reliable opinion
The Power Force 22 mm intake for AM6 fits perfectly, assembly without problems. The material feels good, seals well and fits the 22mm carburetor perfectly. The engine has stable running and better mixture delivery. For me a great addition to the tuning, I recommend it.
Review translated automatically
Reliable opinion
Suzuki TS 50 XK 1991 after changing the engine to minarelli am6 because the parts are more available. The build quality of these gaskets is good, but I don't like the packaging. I had to struggle a bit to get them out. That's the only downside.
Review translated automatically
Reliable opinion
I have 4 Vespa, Vespa Cosa, PK, PX two pieces. It was the first time I made a purchase here and overall very pro, shipping very efficiently, packed git. I suspect that the staff and thus the founder are motorcycle enthusiasts. I recommend, a good store.
Review translated automatically
Reliable opinion
at this gasser there is a hose from the overflow immediately after unpacking was cracked one of the plastic holding the hose hopelessly disintegrates in your hands the rest of the gasser ok except that sometimes it leaks something is jammed inside
Review translated automatically
Reliable opinion
Hello I recommend this product because it is made of very good and durable material the product does not have any errors such as holes in the spigot is not crossed rubber is in very good condition I recommend.
Review translated automatically
Reliable opinion
The spigot of very good quality, my customer is very satisfied with the tuning of the equipment. The kit installed in DT 50 along with other components from Gmoto wholesale. I received professional comments from the wholesale support department.
Review translated automatically
Reliable opinion
Suzuki TS 50(80) 1991r, 13000km. The carburetor came with a damaged plastic spigot probably from the overflow (not important). After installation, the carburetor immediately works, a minor adjustment of the composition of the mixture and there. recommend the product.
Review translated automatically
Reliable opinion
I recommend, good price for the quality. Included were nozzles of other sizes so there were no problems with the adjustment. Mounted to husqvarna te 125 /180 goes perfectly feel that it has a better response to the gas.
Review translated automatically
Reliable opinion
Hello I own a Rieju MRT 50 this sensor fits perfectly to install it you have to spend 2 minutes so a little off topic the sensor was supposed to come in about 20 days came after 4 working days I recommend.
Review translated automatically
Reliable opinion
I highly recommend, fast shipping and great contact with Gmoto.pl service. You can see that the store respects buyers and there is no problem to make contact. Greetings and heartily recommend.
Review translated automatically
Reliable opinion
Mega great, zero leaks , I would still recommend yourself on the end of the manifold that goes into the cylinder to give a little high temperature silicone so that the seal is 100%.
Review translated automatically
Reliable opinion
Super alternative at a super price. No problems with adjustment both with am6 as simson and WSK . In addition we get a set of nozzles, for this money the perfect alternative.
Review translated automatically
Reliable opinion
I have an april rs 50 from 2002 I have replaced several things in it. The gaskets I bought are of very good quality and easy to install. I rate the product as very good.
Review translated automatically
Reliable opinion
Very good fitting gaskets for AM6 engine at affordable price never had any problem with them. HIGHLY RECOMMENDABLE. P.S nice packaging of gaskets
Review translated automatically
Reliable opinion
Another wonderful and glorious gasket kit for minarelli am6 that doesn't fail at all and doesn't let any oil through, not a single drop of oil!
Review translated automatically
Reliable opinion
I bought the carburetor, the delivery was fast and hassle-free. The carburetor is really well made and I recommend it wholeheartedly. Fits perfectly, works flawlessly, recommend.
Review translated automatically
Reliable opinion
I bought the carburetor for a simson and I think it is very good in this type of equipment goes better and collects better oprocznik I received a stylish sticker
Review translated automatically
Reliable opinion
I recommend to all owners of MZ Etz250. It fits without a problem and the engine operation is exemplary. I wish I had decided earlier to buy such a carburetor
Review translated automatically
Reliable opinion
Motorhispania 50cm well made product at a decent price that fits the Am6 perfectly and includes everything needed to mount the motor
Review translated automatically
Reliable opinion
Product admittedly Chinese, but not badly made at all. I personally don't use it but it would work for sure. There is no better carburetor at this price.
Review translated automatically
Reliable opinion
I mounted the carburetor to a Husqvarna TE 125 and am very satisfied with the carburetor added some power, the installation was done quickly and efficiently. I recommend
Review translated automatically
Reliable opinion
The gasket is not the best fit for the power force 70 cylinder It is a little too small which makes the exhaust not pass through it
Review translated automatically
Reliable opinion
The bearing is nice, for its price it is of very good quality, for Yamaha DT 50 it fits perfectly, you can take without a second thought.
Review translated automatically
Reliable opinion
The radiator performs very well? fits the 2007 Yamaha DT50R. Recommended product, had no problems with it :)
Review translated automatically
Reliable opinion
The Part is like as advertised. The material used in the part it is of good quality. Transport to Portugal very fast. Recommend
Review translated automatically
Reliable opinion
I bought this bearing and I must say that it works perfectly. Very good workmanship and conformity to the description.
Review translated automatically
Reliable opinion
Aprilia RS. Engine finally neat as well as clean, zero any oil stains this is what I needed :)
Review translated automatically
Reliable opinion
Good needle bearing, has done its job to date without any problems. Top price-performance ratio!
Review translated automatically
Reliable opinion
Fits original minarelli piston, made very well, no compatibility problems
Review translated automatically
Reliable opinion