Forgot password
Order status
Free delivery from 150 euro
Motorcycle parts
Yamaha XJR 1300 1999
Options +25 
Browse by manufacturer
Products reviews
I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.
Review translated automatically
Reliable opinion
The GS 500 motorcycle is a machine that I use every day. It gets no concessionary fare and has to endure all sorts of roads. Sometimes fast riding on the expressway, sometimes touring on rough and bumpy roads. The result of this effort is a broken head frame bearing, which bravely endured all the forces acting on the motorcycle. It was time for a bearing from the proven Tourmax company, which I got very quickly thanks to the Gmoto.pl store. The package came quickly, well packed. Goods of the highest quality. Since the replacement of the bearing nothing has happened to the motorcycle and you can confidently continue the season.
Review translated automatically
Reliable opinion
parts in conformity with my expectations (clutch receiver repair kit) with a very correct delivery time the product is of good quality and the assembly clean with the origin I highly recommend this site, which is very clear and communicates well about the product. what's more, the drivers are friendly and smiling ( DPD ) I wouldn't hesitate to order again at a later date for my machines that I look after ( they are over 20 years old ) Mr Gernez R
Review translated automatically
Reliable opinion
I have a Yamaha XJR 1300 motorcycle and needed sealers and hoods for the lags. The hoods in the front suspension were still original and I just wanted the look to stay the same. Because of this and I bought this kit. And plus it turned out to be a good quality product. Hoods and sealers quite flexible and fit perfectly in their places. I am very satisfied. I recommend.
Review translated automatically
Reliable opinion
Product in conformity with my request with a delivery time ultra fast and protected with handing-over in person and signature I recommend without hesitating Gmoto for the spare parts it is the second time that I order the kit of repair for my 2 motor bikes and I am satisfied with quality and the delivery you can go there without hesitating.
Review translated automatically
Reliable opinion
My motorcycle is a Yamaha XJR 1300, and I ordered a Tourmax clutch actuator repair kit from the Gmoto store. Quality of materials good. I have ordered parts for my motorcycle from this store and before. I am always satisfied: fast service and well-packed fast delivery. All questions are answered quickly and gladly. I recommend.
Review translated automatically
Reliable opinion
Valves of good quality, fit seamlessly into the Yamaha Thunderace 1000. The only minor insignificant difference, the wire at the top of the valve does not fully close only is such a letter "L". But this does not interfere with anything. After installation it works elegantly. :)
Review translated automatically
Reliable opinion
Honda XL 125 Varadero year 2006. fairing mounting pin fits perfectly, made very solidly, made of strong plastic material. Matched very well to the original, virtually indistinguishable.
Review translated automatically
Reliable opinion
Yamaha Virago 1100 year 1996 Product as ordered. In the original box. Assembly without adventures. Everything fit. Parameters of the device in accordance with the manufacturer of the motorcycle.
Review translated automatically
Reliable opinion
Exemplary fit head tube bearings. They have an additional seal, which will distinguish them from other bearings. Once installed, they fulfill their purpose 100%. Recommended.
Review translated automatically
Reliable opinion
Honda Varadero 125 2007r (polift) The pin looks and fits the same literally dot to dot as the original. So I confidently recommend the more that the price is better than in ASO
Review translated automatically
Reliable opinion
Fits perfectly, should be added to the oil refinisher, the cost is pennies and most often the protection is already affected by corrosion and suitable for replacement
Review translated automatically
Reliable opinion
Everything ok, the pin fits nicely and holds the fairing well, even after several times of removing the fairing and driving several thousand kilometers everything holds HONDA CBR F4 2000r.
Review translated automatically
Reliable opinion
The bearings fit very well to the frame head from a 93r gsxr 750 well made And I'm surprised the garland is metal because the previous ones I had had a plastic one
Review translated automatically
Reliable opinion
Excellent product. It fit properly in the caliper and I no longer have any leakage from the wear and tear of the previous one. Tourmax quality comparable to the factory ones.
Review translated automatically
Reliable opinion
top received on time, perfect service, well packaged, no problem for transport.....good quality product for my Xjr, same as in France
Review translated automatically
Reliable opinion
Great quality replacement, the previous protection totally corroded, I hope this will live a little. I replaced it on a DR 650 SE vintage 1996
Review translated automatically
Reliable opinion
Very solid bearings, all metal, tightly fitted to the post, smooth operation, workmanship 10/10, , "made in Japan" speaks for itself.
Review translated automatically
Reliable opinion
yamaha diversion 600 2002 element purchased really good quality,without any problems installed in the shin of the front suspension recommend kind regards lwg
Review translated automatically
Reliable opinion
Yamaha FJR 1300, vintage 2009, the product does not differ in any way from the original or that purchased from the service. The price for it is dramatically different.
Review translated automatically
Reliable opinion
Super bearing, the ciera now turns as it should, when hammering, it is better not to hit the cage because it can break down which almost happened to me 4/5
Review translated automatically
Reliable opinion
Yamaha XV 1100, year 1996, the sensor did its job and the installation process went smoothly, my XV regained its former efficiency
Review translated automatically
Reliable opinion
Good product delivered quickly. I searched for a while to avoid spending so much and found what I was looking for at GMOTO. That's how it should be.
Review translated automatically
Reliable opinion
I am super happy with what I have bought Everything works as it should so it runs fine now Good quality works as it should
Review translated automatically
Reliable opinion
Easy to fit in place of the old one, looks and feels identical to the original.
Review translated automatically
Reliable opinion
Yamaha xvz12TD. Everything fits. The old ones unfortunately corroded. Thank you. I will definitely come back to you.
Review translated automatically
Reliable opinion
Delivered as ordered. Everything in order. I would order from GMoto again. It is a reliable supplier.
Review translated automatically
Reliable opinion
Bearings of very good quality I order for the next timeideally fit the model selected in the search engine Gmoto.
Review translated automatically
Reliable opinion
Very nice pegs you can see that they are not made of just anything so I put them on without any problem they look like the original ones
Review translated automatically
Reliable opinion
Everything fits, good value for money. The manufacturing quality of the product is good. Highly recommend.
Review translated automatically
Reliable opinion
Everything fits, good value for money. The manufacturing quality of the product is good. Highly recommend.
Review translated automatically
Reliable opinion
Clutch actuator repair kit fits 1999 XJR 1300SP, workmanship at a very good level.
Review translated automatically
Reliable opinion
YAMAHA XJR1300SP vintage 1999, all parts fit perfectly (to the eye does not differ from the original).
Review translated automatically
Reliable opinion
Yamaha XJR 1300; Hassle-free purchase, delivery, installation. As always a big +. I recommend the store and the product.
Review translated automatically
Reliable opinion
Yamaha Drag Star 1100 2007 year super stuff recommend !!!!!!!!!!!!!!!!
Review translated automatically
Reliable opinion
Other models of
- Yamaha XJR 1300 2011
- Yamaha XJR 1300 2012
- Yamaha XJR 1300 SP 1999
- Yamaha XJR 1300 2000
- Yamaha XJR 1300 SP 2000
- Yamaha XJR 1300 2001
- Yamaha XJR 1300 SP 2001
- Yamaha XJR 1300 2002
- Yamaha XJR 1300 2002
- Yamaha XJR 1300 2003
- Yamaha XJR 1300 2003
- Yamaha XJR 1300 2004
- Yamaha XJR 1300 2005
- Yamaha XJR 1300 2006
- Yamaha XJR 1300 2007
- Yamaha XJR 1300 2008
- Yamaha XJR 1300 2009
- Yamaha XJR 1300 2010
- Yamaha XJR 1300 2002
- Yamaha XJR 1300 2003
- Yamaha XJR 1300 2013
- Yamaha XJR 1300 C 2015
- Yamaha XJR 1300 C 2016
- Yamaha XJR 1300 C Anniversary 2016
- Yamaha XJR 1300 2012
- Yamaha XJR 1300 2014
- Yamaha XJR 1300 Racer 2015
- Yamaha XJR 1300 Racer 2016
- Yamaha XJR 1300 1998