Motorcycle parts
Yamaha XP 530 T-Max - Page 5

2018-11-01, 20:15

View original

Krzysztof

I ordered the air vents with the motorcycle Honda XRV 750 Africa Twin - 1999 in mind. They fit the front calipers as well as the rear caliper. After screwing in, there is a little bit of thread sticking out(this is for a small minus), which is covered by a blanking rubber. They successfully replace the original, which is twice as expensive in the service. To the aesthetics and solidity rather can not be complained about - no burrs, the layer of zinc is placed on well-prepared steel. When tightening, care should be taken to select a perfectly matching wrench, scratches and destruction of the zinc layer can result in the appearance of rust in a fairly short time due to the fact that the material is steel. The downgrade for the material is due to the fact that I would prefer stainless steel instead of steel and zinc.

Review translated automatically

Reliable opinion

2022-06-16, 22:36

View original

Boszu

It fits the 2008 Yamaha XVS 1300 VStar. But I personally recommend, however, to order a filter with a keyed end, because when replacing it, you have to punch holes in the old filter to unscrew it. (No room for specialized tools) And when screwing on the new one, you have to tighten with an old-style leather strap, because another tool will not fit, and in your hands you will not tighten enough also due to lack of space.

Review translated automatically

Reliable opinion

2020-04-14, 09:01

View original

Mateusz

Although it was out of stock the delivery came within 2 days of ordering. It was the first time I used the site ,,GMOTO.PL '' and certainly not the last. Entering the site everything is clear very nice to look for parts. Very big plus :) There was always a problem to which store to go to buy oil , candles , filter. Now I do not have to worry about it. I recommend Matthew YAMAHA XT660X 05'

Review translated automatically

Reliable opinion

2021-02-16, 11:19

View original

Oleksandr

I have a Yamaha XJR 1300 motorcycle and needed sealers and hoods for the lags. The hoods in the front suspension were still original and I just wanted the look to stay the same. Because of this and I bought this kit. And plus it turned out to be a good quality product. Hoods and sealers quite flexible and fit perfectly in their places. I am very satisfied. I recommend.

Review translated automatically

Reliable opinion

2020-05-03, 00:23

View original

Maciej

Wsk 125 The frame is nice, you can't expect more from a plastic metallized one. It fits my wsk-i nicely. The only big minus is that it did not fit completely in the holes - I had to widen the holes with a drill both at the top and bottom. Other than that, installation was easy. I recommend the product for those who don't mind making up holes.

Review translated automatically

Reliable opinion

2024-12-05, 18:19

View original

ΑΝΔΡΕΑΣ

Thank you for shipping the correct parts that I ordered for my motorcycle.Everything was delivered in the best condition possible.Im very pleased with your team and management.The shipment was very fast and very cheap.All the parts were suitable and they were exactly what I ordered.Thank you a million.Andreas from Greece

Review translated automatically

Reliable opinion

2024-08-27, 10:29

View original

mateusz

Elegantly, my motorcycle again chatters as it should, relative to the original I see no difference. Fits perfectly nothing sticks out of the place provided by Yamaha designers. The screws go into their place. In the case of fz6N without stress you can replace this part yourself under the block.

Review translated automatically

Reliable opinion

2021-05-08, 07:38

View original

Andrzej

Plastic license plate frame looks like a good chrome material I changed the plate because I became the owner of a Suzuki Intruder VL 125 2000 year all in all. Looks super material fine that's why the price very low ugly comes longer.

Review translated automatically

Reliable opinion

2019-06-17, 07:58

View original

Damian

In the category of quality/price very nice frame. Strong plastic imitating chrome. Aesthetics at a high level. Lightweight and durable And the license plate enters on contact ( for me a plus because there is no slack). I recommend

Review translated automatically

Reliable opinion

2024-09-18, 13:04

View original

Rico

The voltage regulator was perfect for the Yamaha Fz6 N S2. Removal of the old and fitting of the new was easy, the plugs fitted well. Overall satisfied with the product. Shipped to Estonia in a couple of days.

Review translated automatically

Reliable opinion

2017-09-04, 10:25

View original

Mariusz

frame very nice, put on jawa ts 350 looks very good on this motorcycle, installation also very pleasant immediately changes the name of the motorcycle adds better charm

Review translated automatically

Reliable opinion

2024-09-25, 05:27

View original

Filip

Very good solution for those who want to replace the license plate frame with a new one. The price is very affordable. The quality of workmanship is also flawless. I can recommend

Review translated automatically

Reliable opinion

2019-06-10, 20:27

View original

Wojciech

Fits perfectly, should be added to the oil refinisher, the cost is pennies and most often the protection is already affected by corrosion and suitable for replacement

Review translated automatically

Reliable opinion

2018-12-21, 13:12

View original

Michał

Yamaha FZ6 S2 600 2008, the product is no different from the original, identical construction, installation went smoothly literally in 5 minutes. Currently it is running without complaint.

Review translated automatically

Reliable opinion

2025-04-13, 11:27

View original

NIKOS

Excellent product. It fit properly in the caliper and I no longer have any leakage from the wear and tear of the previous one. Tourmax quality comparable to the factory ones.

Review translated automatically

Reliable opinion

2024-07-05, 06:46

View original

Krzysztof

Great quality replacement, the previous protection totally corroded, I hope this will live a little. I replaced it on a DR 650 SE vintage 1996

Review translated automatically

Reliable opinion

2020-06-01, 17:53

View original

mariusz

yamaha diversion 600 2002 element purchased really good quality,without any problems installed in the shin of the front suspension recommend kind regards lwg

Review translated automatically

Reliable opinion

2025-09-18, 10:04

View original

ΔΗΜΗΤΡΗΣ

It has nickel finish but its plastic, the article says metallic but thats wrong, if you want it for enduro bike or adv its not metallic

Review translated automatically

Reliable opinion

2018-05-07, 18:15

View original

Magdalena

WSK M6 B3 1982 Very good quality product easy to install. Fits perfectly, looks very good. Frame worth recommending.

Review translated automatically

Reliable opinion

2025-07-27, 08:46

View original

Eckehard

Good product delivered quickly. I searched for a while to avoid spending so much and found what I was looking for at GMOTO. That's how it should be.

Review translated automatically

Reliable opinion

2024-12-26, 03:21

View original

Uwe-Rainer

I am very satisfied with the fast delivery and would order again at any time. With kind regards U.-R. Agthe

Review translated automatically

Reliable opinion

2024-11-07, 15:27

View original

ΠΈΤΡΟΣ

Very good product guaranteed I say years I put this company no problem at all and economical compared to the originals .

Review translated automatically

Reliable opinion

2023-08-14, 15:03

View original

Janek

I have not yet assembled and do not know how with the fragility of the plastic, but from the outside it looks positive. On the back a slight unpainting.

Review translated automatically

Reliable opinion

2024-11-26, 14:30

View original

Javier

The spark plugs that I ordered seem to be of very good quality and they arrived without any kind of failure, now I just need to test them.

Review translated automatically

Reliable opinion

2020-11-07, 21:27

View original

Robert

Yamaha xvz12TD. Everything fits. The old ones unfortunately corroded. Thank you. I will definitely come back to you.

Review translated automatically

Reliable opinion

2024-11-07, 08:28

View original

Furui

Delivered as ordered. Everything in order. I would order from GMoto again. It is a reliable supplier.

Review translated automatically

Reliable opinion

2020-05-25, 21:10

View original

Paweł

The frame mounted on the motorcycle and from today it pleases the eye, I did not want to drill the boards and with the product I am satisfied.

Review translated automatically

Reliable opinion

2016-02-05, 17:21

View original

motojulek

ngk spark plugs we all know what to write here,quality,performance,failure-free,at the highest level just recommend :-)

Review translated automatically

Reliable opinion

2017-04-07, 10:45

View original

Bartłomiej

Kawasaki Z750 vintage 2011 seals very good. Perfectly fitted, do not let go of oil. I recommend :)

Review translated automatically

Reliable opinion

2024-11-21, 09:46

View original

Keidi

Great! I'm happy. I received the product very quickly ! The packaging was decent. Would definitely order again if needed.

Review translated automatically

Reliable opinion

2021-06-04, 09:45

View original

Marcin

Kymko Downtown 125 and the plug works great. Immediately it was possible to hear a different work of the engine. I recommend it to everyone.

Review translated automatically

Reliable opinion

2019-04-06, 12:00

View original

Tomasz

Very fast shipping parts fit perfectly everything needed for the motorcycle can be found I recommend

Review translated automatically

Reliable opinion

2018-03-05, 19:36

View original

Dariusz

Yamaha Drag Star 1100 2007 year super stuff recommend !!!!!!!!!!!!!!!!

Review translated automatically

Reliable opinion

2021-07-14, 14:46

View original

Tomasz

Perfect fit. Good workmanship for little money.

Review translated automatically

Reliable opinion